Goodman 2.5 Ton 14.3 SEER2 Air Conditioner R32 Single Stage GLXS4BA3010
The Goodman 2.5 Ton Air Conditioner Condenser GLXS4BA3010 offers efficient cooling performance for your home. With a 14.3 SEER2 rating, this unit is designed to provide exceptional energy efficiency, helping to lower your utility bills. It delivers a robust 30,000 BTU of cooling power, ideal for medium-sized spaces. The single-stage operation ensures reliable and consistent comfort, while the R32 refrigerant promotes environmental sustainability. Operating on 208/230V single-phase power, this condenser is a smart choice for homeowners seeking reliable and eco-friendly cooling solutions. Experience comfort with Goodman!
- Energy Star Certified: No
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32 in
- Unit Width: 29 in
- Cooling Capacity Nominal: 30000 Btu/H
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 208/230 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 155.4 lb
- Unit Depth: 29 in
Product Features
-
High-Efficiency Scroll Compressor: Maximizes performance and energy savings.
-
High-Density Foam Compressor Sound Blanket: Ensures quiet operation.
-
Advanced Copeland CoreSense Technology: Enhances diagnostics and efficiency.
-
Fully Charged for 15' of Tubing Length: Convenient installation.
-
Copper Tube/Enhanced Aluminum Fin Coil (5mm Diameter): Superior heat exchange for effective cooling.
-
Factory-Installed Filter Drier: Simplifies maintenance.
-
Sweat Connection Service Valves: Easy access to gauge ports.
-
Enclosed Contactor with Lug Connection: Increases reliability.
-
High-Pressure Switch: Protects the system from pressure issues.
-
Capacitors with Extended Life: Ensures long-lasting performance.
-
AHRI Certified: Validated efficiency and performance.
-
ETL Listed: Meets safety standards.
Cabinet Features
-
Removable Grille-Style Top: UL 60335-2-40 compliant for safety.
-
Venturi Design: Enhances airflow velocity for improved cooling.
-
Architectural Gray Powder-Coat Finish: 500-hour salt-spray approved for durability.
-
Wire Fan Grille: Durable and safe design.
-
Steel Coil Guard: Protects the coil from damage.
-
Maintenance Access: Convenient top and side access for servicing.
-
Control Access: Single-panel design with space for accessories.
-
Hurricane Compliance: Meets 2023 Florida Building Code for wind integrity when anchored.
Goodman 96% AFUE Gas Furnace 80,000 BTU Two-Stage Upflow/Horizontal Multi-Speed GM9C960804CN
The Goodman 96% AFUE Gas Furnace, 80,000 BTU, model GM9C960804CN, offers efficient heating for upflow/horizontal installations. Featuring a multi-speed ECM blower motor, aluminized-steel tubular heat exchanger, and stainless-steel secondary heat exchanger, it ensures durability and optimal performance. The two-stage gas valve provides economical heating, while the Silicon Nitride igniter guarantees reliable operation. Additional features include a self-diagnostic control board, low-voltage terminals for air cleaner and humidifier integration, and quiet low-speed fan options.
- Unit Height: 33-3/8 in
- Unit Width: 21 in
- AFUE: 96 %
- 80,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 20 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 123 lb
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
Product Features For Goodman 96% AFUE Highly Efficient Gas Furnace
-
Energy-efficient multi-speed ECM blower motor for optimal performance
-
Heavy-duty aluminized-steel tubular heat exchanger ensures durability
-
Stainless-steel secondary heat exchanger enhances efficiency
-
Two-stage gas valve provides quiet and economical heating
-
Durable Silicon Nitride igniter for reliable ignition
-
Quiet two-speed induced draft blower for improved comfort
-
Self-diagnostic control board with constant memory fault code history output to an LED for easy troubleshooting
-
Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier
-
Low continuous fan speed options deliver quiet air circulation
- All models comply with California 40 ng/J Low NOx emissions standard
- Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) after October 1, 2019
-
AHRI Certified and ETL Listed for safety and performance
- Designed for multi-position installation — upflow, horizontal left or right
- Certified for direct vent (2-pipe) or non-direct vent (1-pipe) applications
- Easy-to-install top venting with optional side venting
-
Convenient left or right connection for gas and electrical service
-
Cabinet air leakage (QLeak) ≤ 2% for efficiency
-
Heavy-gauge steel cabinet with a durable finish
- Fully insulated heat exchanger and blower section for reduced noise
-
Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications
The Goodman 3 Ton R32 Cased Evaporator Coil (CHPTA3630C3) is designed for efficient horizontal installations, optimized for R-32 refrigerant with a built-in sensor and factory-installed TXV. Its all-aluminum coil ensures reliable cooling, while a single front access panel simplifies maintenance. Features include rust-resistant, low-retention thermoplastic drain pans, foil-faced insulation to reduce condensation, and a galvanized finish. Compact at 21" deep, it’s AHRI certified and ETL listed for quality and safety compliance.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 30 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum evaporator coil: Engineered for durability and efficient cooling performance.
-
Optimized for R-32 refrigerant: Includes circuits and manifolds specifically designed for compatibility with R-32, maximizing efficiency.
-
R-32 sensor: Built to match the coil's lifespan, ensuring consistent monitoring and performance.
-
Factory-installed thermal expansion valves: Ideal for both cooling and heat pump applications, enhancing efficiency.
-
Standardized copper suction tube: Ensures ease of installation and compatibility.
-
Check flowrator: Provides precise flow control for both cooling and heat pump setups.
-
Horizontal application: Adaptable for multiple installation positions.
-
21" depth: Compact size allows for easier attic access and flexible placement.
-
Single front access panel: Facilitates streamlined maintenance and servicing.
-
Foil-faced insulation: Reduces cabinet condensation and improves thermal efficiency.
-
Galvanized, leather grain-embossed finish: Adds rust resistance and a durable exterior finish.
-
Rust-resistant thermoplastic drain pan: Features low water retention to prevent buildup.
-
DecaBDE-free thermoplastic drain pan: Equipped with secondary drainage connections for optimal performance.
-
Drain pan rails: Designed for easy coil removal and repositioning without affecting structural integrity.
-
UV-resistant drain pan: Enhances longevity by resisting sun damage.
-
AHRI certified and ETL Listed: Meets industry standards for safety, quality, and performance.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
