Goodman 2 Ton R32 Air Conditioner Condenser 14.3 SEER2 GLXS4BA2410

This HVAC system features a high-efficiency scroll compressor for optimal cooling and energy savings. It includes a high-density foam sound blanket for quieter operation and advanced Copeland CoreSense Technology for enhanced reliability and diagnostics. Pre-charged with refrigerant for up to 15 feet of tubing, it simplifies installation. The system boasts a durable copper and aluminum fin coil, a factory-installed filter drier, and easy-to-access service valves. It also has a secure enclosed contactor, a high-pressure switch for safety, and long-lasting capacitors. Certified by AHRI for performance and ETL Listed for safety, it ensures reliable, efficient operation.

• Refrigerant Type: R-32
• SEER 2: 14.3
• Unit Height: 27 in
• Unit Width: 26 in
• Communication Feature Type: Non-Communicating
• Cooling Capacity Nominal: 24000 Btu/H
• Max Overcurrent Protection: 15 A
• Power Phase: 1 Ph
• Power Voltage: 208/240 V
• Compressor Stages: Single Stage
• Compressor Type: Rotary
• Unit Weight: 70 lb
• Tonnage: 2
• Unit Depth: 26 in

• Brand: Goodman
• Model: GLXS4BA2410
• Refrigerant Type: R-32
• SEER2 Rating: 14.3
• Cooling Capacity: 24,000 Btu/H

Product Features for Goodman 2 Ton R32 AC Condenser (GLXS4BA2410)

• High-Efficiency Scroll Compressor: Provides optimal cooling and energy savings.
• Sound Reduction: Equipped with a high-density foam sound blanket for quieter operation.
• Advanced Copeland CoreSense Technology: Ensures enhanced reliability and diagnostics.
• Pre-Charged Refrigerant: Ready for up to 15 feet of tubing, simplifying installation.
• Durable Coil Design: Copper tube with enhanced aluminum fin coil (5mm diameter).
• Factory-Installed Filter Drier: Improves system longevity.
• Easy Service Access: Sweat connection service valves with easy access to gauge ports.
• Safety Features: Includes an enclosed contactor with lug connection, high-pressure switch, and long-lasting capacitors.
• Certified for Quality: AHRI Certified for performance and ETL Listed for safety.
• Removable Grille-Style Top: UL 60335-2-40 compliant for safety.
• Venturi Design: Enhances airflow velocity for improved cooling efficiency.
• Architectural Gray Finish: Powder-coated with 500-hour salt-spray approval for durability.
• Wire Fan Grille & Steel Coil Guard: Ensures protection and safety.
• Maintenance & Control Access: Convenient top and side access, with a single-panel control area.
• Hurricane Compliance: Meets 2023 Florida Building Code for wind integrity when anchored.

Goodman Gas Furnace 96% AFUE 40,000 BTU Upflow/Horizontal Two-Stage GM9C960403AN

The Goodman Gas Furnace, 96% AFUE, 40,000 BTU, model GM9C960403AN, offers upflow/horizontal installation for optimal energy savings. It features durable aluminized-steel and stainless-steel heat exchangers, a two-stage gas valve, and a multi-speed ECM blower motor for quiet operation. With a self-diagnostic control board, two-speed draft blower, versatile venting options, and flexible service connections, this fully insulated unit ensures efficient heating and comfort.

• Unit Height: 33.375 in
• Unit Width: 14 in
• AFUE: 96 %
  
• Installation Configuration: Upflow/Horizontal
• Max Overcurrent Protection: 15 A
• Power Phase: 1 Ph
• Power Voltage: 115 V
• Motor Speed Type: Multi Speed ECM
• Unit Weight: 106 lb
• Unit Depth: 28 in

• Energy-efficient
• Aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Two-stage gas valve
• Silicon Nitride igniter
• Two-speed induced draft blower
• Self-diagnostic control board
• Electronic air cleaner
• Humidifier
• Low continuous fan speed options

Product Features for Goodman 96% AFUE Upflow/Horizontal Gas Furnace (GM9C96 Series)

• High Efficiency: Achieves an impressive 96% AFUE rating, ensuring optimal energy savings and reduced utility bills.
• Durable Construction: Features an aluminized-steel tubular heat exchanger for enhanced durability and performance.
• Advanced Heating Technology: Equipped with a stainless-steel secondary heat exchanger for improved heat transfer and efficiency.
• Reliable Ignition: Utilizes a silicon nitride ignitor for quick and dependable ignition performance.
• Multi-Speed ECM Blower Motor: Offers variable-speed operation for consistent comfort and quiet performance.
• Two-Stage Gas Valve: Provides precise heating control, allowing for more efficient operation during varying temperature demands.
• Enhanced Airflow: Features a two-speed induced draft blower for improved airflow and efficient venting.
• Self-Diagnostic Control Board: Facilitates troubleshooting and ensures reliable operation with advanced diagnostics.
• Versatile Venting Options: Certified for direct vent (2-pipe) or non-direct vent (1-pipe) configurations, allowing for flexible installation.
• Flexible Connection: Gas and electrical service connections can be made on either the left or right side for added installation convenience.
• Insulated Design: Fully insulated heat exchanger and blower section minimize noise and improve energy efficiency.

Goodman 1.5 - 2 Ton R32 Evaporator Coil Upflow/Downflow Cased CAPTA2422A3

This all-aluminum evaporator coil is optimized for R-32 refrigerant and includes factory-installed thermal expansion valves. It features a compact 21" depth for easy attic access, a rust-resistant, UV-resistant drain pan, and a single front access panel for simple servicing. Foil-faced insulation reduces condensation, and the galvanized finish ensures durability. AHRI certified and ETL listed for reliable performance.

• Refrigerant Type: R-32
• Unit Height: 22 in
• Unit Width: 14 in
• Cased/Uncased: Cased
• Tonnage: 2.0
• Coil Application: Upflow/Downflow
• Unit Depth: 21 in

• Evaporator Coil
• R-32 Refrigerant Coil
• High-Performance HVAC Solutions
• Thermal Expansion Valves
• Flexible Installation Options
• Foil-Faced Insulation
• Durable Drain Pan
• AHRI Certified Coil
• UV-Resistant Drain Pan
• Galvanized Finish Coil

Product Features for High-Performance All-Aluminum Evaporator Coil

• R-32 Refrigerant Compatibility: Optimized specifically for R-32 refrigerant, ensuring efficient cooling and heating performance.
• Integrated Thermal Expansion Valves: Factory-installed thermal expansion valves in CAPTA and CHPTA models for seamless cooling and heat pump applications.
• Flexible Installation Options: Available in both vertical and horizontal configurations, providing versatile installation choices.
• Compact Design: With a 21-inch depth, this coil is designed for easy access in tight spaces like attics.
• Foil-Faced Insulation: Helps reduce cabinet condensation, enhancing overall system efficiency.
• Durable Drain Pan: Features a rust-resistant, UV-resistant thermoplastic drain pan with low water retention and additional drainage connections.
• Maintenance Convenience: Easy-to-remove drain pan rails simplify maintenance and repositioning.
• Galvanized Finish: Durable, leather grain-embossed galvanized finish enhances longevity and resistance to wear.
• AHRI Certified and ETL Listed: Certified for performance and safety, ensuring reliable operation in any HVAC system.
• Optimized Circuits and Manifolds: Standardized copper suction tube stub length for improved installation and efficiency.
• DecaBDE-Free Drain Pan: Environmentally friendly drain pan design with secondary drain connections for added functionality.

Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044

The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.

Key Features:

• Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
• Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
• Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
• Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.

This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.