Goodman R32 3.5 Ton Air Conditioner Condenser 14.3 SEER2 42000 BTU GLXS4BA4210
This HVAC system features a high-efficiency scroll compressor for optimal cooling and energy savings. It includes a high-density foam sound blanket for quieter operation and advanced Copeland CoreSense Technology for enhanced reliability and diagnostics. Pre-charged with refrigerant for up to 15 feet of tubing, it simplifies installation. The system boasts a durable copper and aluminum fin coil, a factory-installed filter drier, and easy-to-access service valves. It also has a secure enclosed contactor, a high-pressure switch for safety, and long-lasting capacitors. Certified by AHRI for performance and ETL Listed for safety, it ensures reliable, efficient operation.
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 35.75 in
- Unit Width: 35.5 in
- Communication Feature Type: Non-Communicating
- Cooling Capacity Nominal: 42000 Btu/H
- Max Overcurrent Protection: 30 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 72 lb
- Tonnage: 3.5
- Model Efficiency: 15.2 SEER2
- Unit Depth: 35.5 in
-
Energy-efficient compressor with filter drier
-
Fully charged for 15' tubing
-
Copper tube with aluminum fin coil
- Sweat connection valves
-
Enclosed contactor and switch
-
Ground lug and long-life capacitors
-
AHRI Certified and ETL Listed
-
Removable grille (UL 60335-2-40)
-
Venturi design for airflow
-
Architectural Gray finish (500-hour salt-spray)
-
Wire fan grille and coil guard
-
Top/side access with single-panel controls
Product Features For Goodman 3.5 Ton R-32 Split System Air Conditioner
-
Energy-efficient compressor: Maximizes energy savings while providing reliable cooling and heating.
-
Fully charged for 15' of tubing length: Ensures quick installation and immediate system operation.
-
Copper tube and enhanced aluminum fin coil (5mm diameter): Promotes superior heat exchange for improved cooling and heating performance.
-
Factory-installed filter drier: Protects the HVAC system from moisture and contaminants, enhancing reliability.
-
Sweat connection service valves: Simplify maintenance with easy access to gauge ports for efficient diagnostics.
-
Enclosed contactor: Protects electrical components from dust and moisture, ensuring consistent operation.
-
High-pressure switch: Monitors system pressure and automatically shuts down the compressor if limits are exceeded.
-
Ground lug connection: Provides secure electrical grounding, enhancing safety and compliance.
-
Capacitors with extended life: Designed for longevity, reducing replacement frequency and ensuring consistent performance.
-
AHRI Certified: Confirms compliance with energy efficiency standards.
-
ETL Listed: Ensures safety compliance and reliability.
-
Removable grille-style top design (UL 60335-2-40 compliant): Allows easy access for maintenance without extensive disassembly.
-
Venturi design: Enhances airflow velocity for improved system efficiency.
-
Architectural Gray powder-paint finish: Provides durability and corrosion resistance, meeting 500-hour salt-spray approval.
-
Wire fan discharge grille: Improves airflow efficiency while reducing noise.
-
Steel louver coil guard: Protects the coil from damage while ensuring optimal airflow.
-
Top and side maintenance access: Streamlines servicing with multiple access points.
-
Single-panel access to controls: Facilitates easy diagnostics and upgrades.
-
Compliance with the 2023 Florida Building Code: Meets hurricane wind requirements when properly anchored (anchor bracket kits available).
The Goodman 80% AFUE 100,000 BTU Gas Furnace (GM9S801005CX) combines efficient heating with a Low NOx burner, meeting California's stringent emissions standards. This unit features a robust, aluminized-steel tubular heat exchanger for durability, a single-stage gas valve for consistent warmth, and a multi-speed ECM blower motor that adapts airflow to meet demand, improving energy efficiency. Its quiet, single-speed draft inducer minimizes noise, while the self-diagnostic control board simplifies maintenance. This upflow/horizontal model also supports electronic air cleaners and humidifiers, delivering versatile comfort.
- NOx Burner Type: Low NOx
- Unit Height: 33-3/8 in
- Unit Width: 21 in
- AFUE: 80 %
- 100,000 BTU Heating
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 132 lb
- Model Efficiency: 0.8
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
- High reliability and quality
- Durable, long-lasting igniter
- Supports electronic air cleaner and humidifier
- Energy-efficient, quiet circulation
- Self-diagnostic control board with constant memory
- Easy installation and setup
- Quiet, straightforward operation
Product Features For Goodman 80% Efficiency 100,000 BTU Gas Furnace
-
Heavy-Duty Aluminized-Steel Dual-Diameter Tubular Heat Exchanger: Engineered for durability, ensuring efficient heating performance and long life.
-
Single-Stage Gas Valve: Delivers reliable, consistent heating, ideal for maintaining desired comfort levels efficiently.
-
Durable Hot-Surface Igniter: Built for long-lasting performance, providing reliable ignition without pilot lights.
-
Quiet, Single-Speed Draft Inducer: Minimizes operational noise, maintaining comfort without disruptive sounds.
-
Self-Diagnostic Control Board: Monitors system health with fault code history output, simplifying troubleshooting and maintenance.
-
Color-Coded Low-Voltage Terminals: Streamlines installation with easy identification for safe and efficient connections.
-
Multi-Speed ECM Blower Motor: Enhances energy efficiency with adaptable speeds, improving airflow based on heating requirements.
-
California Low NOx Emissions-Compliant Models Available: Meets strict California emissions standards for cleaner environmental performance.
-
AHRI Certified & ETL Listed: Verified for performance, safety, and quality standards in HVAC systems.
Installation and Configuration
-
Installation Flexibility:
-
GM9S80: Supports upflow and horizontal (left or right) configurations.
-
GC9S80: Designed for downflow and horizontal (left or right) configurations.
-
Left or Right Connection Options: Provides adaptable connection points for gas and electrical, simplifying the installation process.
Cabinet Features
-
Heavy-Gauge Steel Cabinet: Finished with a durable baked-enamel coating for enhanced protection and longevity.
-
Foil-Faced Insulated Heat Exchanger: Reduces heat loss, maximizing efficiency and retaining heat within the unit for optimal performance.
Goodman 4 Ton R32 Evaporator Coil is designed for horizontal installation, measuring 21" high and 30" wide. Constructed from durable all-aluminum, it optimizes heat exchange and is compatible with R-32 refrigerant. Featuring factory-installed thermal expansion valves for precise refrigerant flow, the coil includes a single front access panel for easy servicing. The rust-resistant thermoplastic drain pan promotes efficient drainage, while the galvanized finish enhances durability. AHRI certified and ETL listed, this coil meets industry standards for reliable performance and safety.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 30 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum Construction: Durable and lightweight, optimizing heat exchange and enhancing efficiency.
-
Optimized for R-32 Refrigerant: Designed for compatibility with R-32 refrigerant, including integrated circuits and manifolds for improved performance.
-
R-32 Sensor: Specifically engineered to ensure optimal functionality throughout the lifespan of the coil.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications, providing precise refrigerant flow control.
-
Standardized Copper Suction Tube Stub Length: Facilitates installation by ensuring consistent sizing across applications.
-
Check Flowrator: Designed for efficient operation in cooling and heat pump applications, enhancing system performance.
-
Horizontal Application Design: Ideal for installation in tight spaces, accommodating various installation needs.
-
21" Depth: Provides easier access for attic installations, improving convenience during maintenance.
-
Single Front Access Panel: Allows quick and easy access to internal components for servicing.
-
Foil-Faced Insulation: Reduces cabinet condensation, improving efficiency and extending the lifespan of the unit.
-
Galvanized Leather Grain-Embossed Finish: Offers a stylish appearance while providing durability against corrosion.
-
Rust-Resistant Thermoplastic Drain Pan: Features a low water-retention design to prevent water buildup and ensure efficient drainage.
-
DecaBDE-Free Thermoplastic Drain Pan: Environmentally friendly design with secondary drain connections for added reliability.
-
Drain Pan Rails: Engineered for easy removal and repositioning of coils without compromising structural integrity.
-
UV-Resistant Drain Pan: Ensures longevity and performance, even in direct sunlight.
-
AHRI Certified: Complies with industry standards for performance and efficiency, ensuring reliable operation.
-
ETL Listed: Meets rigorous safety standards for electrical components, guaranteeing quality and safety.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
