Goodman R32 3.5 Ton Air Conditioner Condenser 14.3 SEER2 42000 BTU GLXS4BA4210
This HVAC system features a high-efficiency scroll compressor for optimal cooling and energy savings. It includes a high-density foam sound blanket for quieter operation and advanced Copeland CoreSense Technology for enhanced reliability and diagnostics. Pre-charged with refrigerant for up to 15 feet of tubing, it simplifies installation. The system boasts a durable copper and aluminum fin coil, a factory-installed filter drier, and easy-to-access service valves. It also has a secure enclosed contactor, a high-pressure switch for safety, and long-lasting capacitors. Certified by AHRI for performance and ETL Listed for safety, it ensures reliable, efficient operation.
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 35.75 in
- Unit Width: 35.5 in
- Communication Feature Type: Non-Communicating
- Cooling Capacity Nominal: 42000 Btu/H
- Max Overcurrent Protection: 30 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 72 lb
- Tonnage: 3.5
- Model Efficiency: 15.2 SEER2
- Unit Depth: 35.5 in
-
Energy-efficient compressor with filter drier
-
Fully charged for 15' tubing
-
Copper tube with aluminum fin coil
- Sweat connection valves
-
Enclosed contactor and switch
-
Ground lug and long-life capacitors
-
AHRI Certified and ETL Listed
-
Removable grille (UL 60335-2-40)
-
Venturi design for airflow
-
Architectural Gray finish (500-hour salt-spray)
-
Wire fan grille and coil guard
-
Top/side access with single-panel controls
Product Features For Goodman 3.5 Ton R-32 Split System Air Conditioner
-
Energy-efficient compressor: Maximizes energy savings while providing reliable cooling and heating.
-
Fully charged for 15' of tubing length: Ensures quick installation and immediate system operation.
-
Copper tube and enhanced aluminum fin coil (5mm diameter): Promotes superior heat exchange for improved cooling and heating performance.
-
Factory-installed filter drier: Protects the HVAC system from moisture and contaminants, enhancing reliability.
-
Sweat connection service valves: Simplify maintenance with easy access to gauge ports for efficient diagnostics.
-
Enclosed contactor: Protects electrical components from dust and moisture, ensuring consistent operation.
-
High-pressure switch: Monitors system pressure and automatically shuts down the compressor if limits are exceeded.
-
Ground lug connection: Provides secure electrical grounding, enhancing safety and compliance.
-
Capacitors with extended life: Designed for longevity, reducing replacement frequency and ensuring consistent performance.
-
AHRI Certified: Confirms compliance with energy efficiency standards.
-
ETL Listed: Ensures safety compliance and reliability.
-
Removable grille-style top design (UL 60335-2-40 compliant): Allows easy access for maintenance without extensive disassembly.
-
Venturi design: Enhances airflow velocity for improved system efficiency.
-
Architectural Gray powder-paint finish: Provides durability and corrosion resistance, meeting 500-hour salt-spray approval.
-
Wire fan discharge grille: Improves airflow efficiency while reducing noise.
-
Steel louver coil guard: Protects the coil from damage while ensuring optimal airflow.
-
Top and side maintenance access: Streamlines servicing with multiple access points.
-
Single-panel access to controls: Facilitates easy diagnostics and upgrades.
-
Compliance with the 2023 Florida Building Code: Meets hurricane wind requirements when properly anchored (anchor bracket kits available).
The Goodman 80% AFUE Gas Furnace (80,000 BTU) combines efficiency and performance with its multi-speed ECM blower and single-stage operation, designed for upflow/horizontal installations. This unit features an 80% AFUE rating and Low NOx technology for reduced emissions. A durable aluminized-steel dual-diameter tubular heat exchanger ensures reliable heating, while a single-stage gas valve provides consistent performance. The hot-surface igniter guarantees dependable ignition. It operates quietly with a single-speed draft inducer and includes a self-diagnostic control board for easy troubleshooting. With a heavy-gauge steel cabinet, baked-enamel finish, and foil-faced insulation, this furnace minimizes heat loss and enhances durability, making it an excellent choice for effective home heating.
- NOx Burner Type: Low NOx
- Unit Height: 33-3/8 in
- Unit Width: 21 in
- AFUE: 80 %
- Cooling Capacity Nominal: 48000 Btu/H
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 132 lb
- Model Efficiency: 0.8
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
- High reliability and quality
- Durable and long igniter life
- Provisions for electronic air cleaner and humidifier
- Energy efficient and quiet circulation
- Self-diagnostic control board with constant memory
- Simple installation and setup
- Quiet and simple operation
Product Features For Goodman 80% Efficiency Gas Furnace Low NOx
-
Heavy-duty aluminized-steel dual-diameter tubular heat exchanger: Designed for enhanced durability and efficiency
-
Single-stage gas valve: Provides reliable heating performance
-
Durable hot-surface igniter: Ensures consistent ignition and long life
-
Quiet, single-speed draft inducer: Minimizes noise while effectively venting exhaust
-
Self-diagnostic control board: Simplifies troubleshooting and maintenance
-
Color-coded low-voltage terminals: Facilitates easy wiring and installation
-
Multi-speed ECM blower motor: Offers improved energy efficiency and airflow control
-
California Low NOx emissions models available: Compliant with environmental regulations
-
Installation restriction: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) after October 1, 2019
-
AHRI Certified; ETL Listed: Ensures compliance with efficiency and safety standards
-
GM9S80: Upflow, horizontal left or right
-
GC9S80: Downflow, horizontal left or right
-
Convenient left or right connections for gas and electrical service
-
Heavy-gauge steel cabinet: Features a durable baked-enamel finish
-
Foil-faced insulated heat exchanger: Reduces heat loss and improves efficiency
Goodman R32 3.5 Ton Cased Evaporator Coil offers exceptional performance with a 30"W design optimized for horizontal applications. It features a durable all-aluminum construction, specifically designed for efficient R-32 refrigerant use. The coil includes a long-lasting R-32 sensor and factory-installed thermal expansion valves for versatility in cooling and heat pump systems. It has a standardized copper suction tube stub length for simplified installation, a single front access panel for easy maintenance, and foil-faced insulation to minimize condensation. The rust-resistant drain pan ensures longevity and compliance with safety standards, being AHRI certified and ETL listed.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 30 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum Evaporator Coil: Designed for optimal heat exchange and enhanced durability.
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds specifically engineered for efficient R-32 refrigerant use.
-
Long-Lasting R-32 Sensor: Designed to match the lifespan of the coil, ensuring reliable performance.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications, providing versatile usage.
-
Standardized Copper Suction Tube Stub Length: Simplifies installation and maintenance processes.
-
Check Flowrator: Engineered for efficient operation in both cooling and heat pump applications.
-
Horizontal Application Design: Facilitates flexible installation options in various settings.
-
21" Depth: Optimized for easier access in attic installations, enhancing usability.
-
Single Front Access Panel: Allows for quick and convenient maintenance and servicing.
-
Foil-Faced Insulation: Covers the internal casing to minimize cabinet condensation and improve energy efficiency.
-
Galvanized, Leather Grain-Embossed Finish: Provides an attractive appearance and added durability.
-
Rust-Resistant Thermoplastic Drain Pan: Features a low water-retention design to prevent corrosion and enhance longevity.
-
DecaBDE-Free Thermoplastic Drain Pan: Includes secondary drain connections for improved water management and compliance.
-
Drain Pan Rails: Designed for easy removal and repositioning of coils without compromising structural integrity.
-
UV-Resistant Drain Pan: Ensures durability and performance even in exposed environments.
-
AHRI Certified: Guarantees performance and efficiency standards are met.
-
ETL Listed: Ensures compliance with safety standards for peace of mind.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
