Goodman R32 3.5 Ton Air Conditioner Condenser 14.3 SEER2 42000 BTU GLXS4BA4210
This HVAC system features a high-efficiency scroll compressor for optimal cooling and energy savings. It includes a high-density foam sound blanket for quieter operation and advanced Copeland CoreSense Technology for enhanced reliability and diagnostics. Pre-charged with refrigerant for up to 15 feet of tubing, it simplifies installation. The system boasts a durable copper and aluminum fin coil, a factory-installed filter drier, and easy-to-access service valves. It also has a secure enclosed contactor, a high-pressure switch for safety, and long-lasting capacitors. Certified by AHRI for performance and ETL Listed for safety, it ensures reliable, efficient operation.
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 35.75 in
- Unit Width: 35.5 in
- Communication Feature Type: Non-Communicating
- Cooling Capacity Nominal: 42000 Btu/H
- Max Overcurrent Protection: 30 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 72 lb
- Tonnage: 3.5
- Model Efficiency: 15.2 SEER2
- Unit Depth: 35.5 in
-
Energy-efficient compressor with filter drier
-
Fully charged for 15' tubing
-
Copper tube with aluminum fin coil
- Sweat connection valves
-
Enclosed contactor and switch
-
Ground lug and long-life capacitors
-
AHRI Certified and ETL Listed
-
Removable grille (UL 60335-2-40)
-
Venturi design for airflow
-
Architectural Gray finish (500-hour salt-spray)
-
Wire fan grille and coil guard
-
Top/side access with single-panel controls
Product Features For Goodman 3.5 Ton R-32 Split System Air Conditioner
-
Energy-efficient compressor: Maximizes energy savings while providing reliable cooling and heating.
-
Fully charged for 15' of tubing length: Ensures quick installation and immediate system operation.
-
Copper tube and enhanced aluminum fin coil (5mm diameter): Promotes superior heat exchange for improved cooling and heating performance.
-
Factory-installed filter drier: Protects the HVAC system from moisture and contaminants, enhancing reliability.
-
Sweat connection service valves: Simplify maintenance with easy access to gauge ports for efficient diagnostics.
-
Enclosed contactor: Protects electrical components from dust and moisture, ensuring consistent operation.
-
High-pressure switch: Monitors system pressure and automatically shuts down the compressor if limits are exceeded.
-
Ground lug connection: Provides secure electrical grounding, enhancing safety and compliance.
-
Capacitors with extended life: Designed for longevity, reducing replacement frequency and ensuring consistent performance.
-
AHRI Certified: Confirms compliance with energy efficiency standards.
-
ETL Listed: Ensures safety compliance and reliability.
-
Removable grille-style top design (UL 60335-2-40 compliant): Allows easy access for maintenance without extensive disassembly.
-
Venturi design: Enhances airflow velocity for improved system efficiency.
-
Architectural Gray powder-paint finish: Provides durability and corrosion resistance, meeting 500-hour salt-spray approval.
-
Wire fan discharge grille: Improves airflow efficiency while reducing noise.
-
Steel louver coil guard: Protects the coil from damage while ensuring optimal airflow.
-
Top and side maintenance access: Streamlines servicing with multiple access points.
-
Single-panel access to controls: Facilitates easy diagnostics and upgrades.
-
Compliance with the 2023 Florida Building Code: Meets hurricane wind requirements when properly anchored (anchor bracket kits available).
Goodman 96% AFUE Gas Furnace 80,000 BTU Nine Speed ECM Single Stage Upflow/Horizontal GM9S960805CN
The Goodman GM9S960805CN gas furnace boasts an impressive 96% AFUE and 80,000 BTU capacity, ensuring reliable heating performance. Its nine-speed ECM motor provides energy-efficient, quiet operation, ideal for upflow or horizontal installation (33-3/8" H x 21" W x 28" D). This model features durable aluminized-steel and stainless-steel heat exchangers for longevity and optimal heat transfer. The single-stage gas valve simplifies operation, while the self-diagnostic control board aids troubleshooting with LED fault history. With California 40 ng/J Low NOx compliance, AHRI certification, and flexible venting options, this furnace is perfect for environmentally conscious homeowners seeking efficiency and comfort.
- Unit Height: 33-3/8 in
- Unit Width: 21 in
- AFUE: 96 %
- Cooling Capacity Nominal: 60000 Btu/H
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Nine Speed ECM
- Unit Weight: 139 lb
- Model Efficiency: 0.96
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
- High reliability and quality
- Faster condensate water drainage and no unit water leakage
- Durable and long igniter life
- Provisions for electronic air cleaner and humidifier
- Energy efficient and quiet circulation
- Self-diagnostic control board with constant memory
- Meets the performance requirements for AHRI certification and complies with ETL North American safety standards
- Tax credit eligibility
- Simple installation and setup
- Easy connection for electronic air cleaner and humidifier
- Extra option for airflow
- High static airflow capability
- Lower NOx emissions
Product Features For Goodman 96% Highly Efficient Gas Furnace
-
Heavy-Duty Aluminized-Steel Tubular Heat Exchanger: Ensures long-lasting durability and efficient heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Provides additional efficiency and extends product lifespan.
-
Single-Stage Gas Valve: Simplifies operation while ensuring reliable heating performance.
-
Durable Silicon Nitride Igniter: Designed for long-term reliability and quick ignition.
-
Quiet Single-Speed Induced Draft Blower: Operates silently, enhancing comfort without disruptive noise.
-
Self-Diagnostic Control Board: Equipped with LED output for constant memory fault code history, facilitating easy troubleshooting.
-
California 40 ng/J Low NOx Compliance: Meets stringent emissions standards, promoting environmental responsibility.
-
Installation Restrictions: Not permitted in California’s South Coast Air Quality Management District (SCAQMD) since October 1, 2019.
-
AHRI Certified & ETL Listed: Ensures compliance with performance and safety standards for peace of mind.
-
Multi-Position Installation Options:
-
GM9S96: Configurable in upflow, horizontal left, or right positions.
-
GC9S96: Configurable in downflow, horizontal left, or right positions.
-
Ventilation Flexibility: Certified for both direct vent (2-pipe) and non-direct vent (1-pipe) installations.
-
Easy Venting Solutions: Top venting with optional side venting available for GM9S96/upflow models.
-
Convenient Service Connections: Gas and electrical service connections available on left or right sides for easy installation.
-
Low Cabinet Air Leakage: QLeak ≤ 2% ensures efficient operation with minimal energy loss.
-
Heavy-Gauge Steel Cabinet: Built for durability and long-term performance, featuring a resilient finish.
-
Fully Insulated Design: Heat exchanger and blower section insulation minimizes heat loss for improved efficiency.
-
Airtight Bottom or Side Return: Features easy-cut tabs for simple removal in bottom air-inlet applications, ensuring hassle-free maintenance.
Goodman R32 3.5 Ton Cased Evaporator Coil offers exceptional performance with a 30"W design optimized for horizontal applications. It features a durable all-aluminum construction, specifically designed for efficient R-32 refrigerant use. The coil includes a long-lasting R-32 sensor and factory-installed thermal expansion valves for versatility in cooling and heat pump systems. It has a standardized copper suction tube stub length for simplified installation, a single front access panel for easy maintenance, and foil-faced insulation to minimize condensation. The rust-resistant drain pan ensures longevity and compliance with safety standards, being AHRI certified and ETL listed.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 30 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum Evaporator Coil: Designed for optimal heat exchange and enhanced durability.
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds specifically engineered for efficient R-32 refrigerant use.
-
Long-Lasting R-32 Sensor: Designed to match the lifespan of the coil, ensuring reliable performance.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications, providing versatile usage.
-
Standardized Copper Suction Tube Stub Length: Simplifies installation and maintenance processes.
-
Check Flowrator: Engineered for efficient operation in both cooling and heat pump applications.
-
Horizontal Application Design: Facilitates flexible installation options in various settings.
-
21" Depth: Optimized for easier access in attic installations, enhancing usability.
-
Single Front Access Panel: Allows for quick and convenient maintenance and servicing.
-
Foil-Faced Insulation: Covers the internal casing to minimize cabinet condensation and improve energy efficiency.
-
Galvanized, Leather Grain-Embossed Finish: Provides an attractive appearance and added durability.
-
Rust-Resistant Thermoplastic Drain Pan: Features a low water-retention design to prevent corrosion and enhance longevity.
-
DecaBDE-Free Thermoplastic Drain Pan: Includes secondary drain connections for improved water management and compliance.
-
Drain Pan Rails: Designed for easy removal and repositioning of coils without compromising structural integrity.
-
UV-Resistant Drain Pan: Ensures durability and performance even in exposed environments.
-
AHRI Certified: Guarantees performance and efficiency standards are met.
-
ETL Listed: Ensures compliance with safety standards for peace of mind.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
