The Goodman 4 Ton R32 Air Conditioner Condenser, model GLXS3BN4810, features a 13.4 SEER2 efficiency rating and operates on 208/230V, single-phase power. With a cooling capacity of 48,000 BTU/H, it includes an energy-efficient scroll compressor and is pre-charged for 15 feet of tubing for easy installation. Constructed with a 5mm diameter copper tube and enhanced aluminum fin coil for optimal heat exchange, it also comes with a factory-installed filter drier, sweat connection service valves, and a high-pressure switch for enhanced safety and performance. AHRI certified and ETL listed, this unit ensures reliability and compliance with industry standards.
- Refrigerant Type: R-32
- SEER 2: 13.4
- Unit Height: 39.5 in
- Unit Width: 29 in
- Communication Feature Type: Non-Communicating
- Cooling Capacity Nominal: 48000 Btu/H
- Max Overcurrent Protection: 40 A
- Power Phase: 1 Ph
- Power Voltage: 208/230 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 188 lb
- Tonnage: 4
- Model Efficiency: 13.4 SEER2
- Unit Depth: 29 in
- Energy-efficient compressor, fully charged for 15' tubing length
- Copper tube/enhanced aluminum fin coil (5mm diameter)
- Factory-installed filter drier
- Sweat connection service valves with accessible gauge ports
- Enclosed contactor with lug connection
- High-pressure switch
- Extended-life capacitors
- AHRI certified and ETL listed
Product Features For Goodman R32 Air Conditioner Condenser
-
Energy-Efficient Compressor: Designed to minimize energy consumption while maximizing performance and reliability.
-
Pre-Charged for 15' of Tubing Length: Factory-filled with refrigerant, simplifying installation and reducing setup time.
-
5mm Diameter Copper Tube with Enhanced Aluminum Fin Coil: Optimized for effective heat exchange, enhancing cooling efficiency.
-
Factory-Installed Filter Drier: Protects the system from moisture and contaminants for improved performance and longevity.
-
Sweat Connection Service Valves: Facilitate easy access to gauge ports for efficient service and maintenance.
-
Enclosed Contactor: Enhances electrical component protection, ensuring safety and reliability.
-
High-Pressure Switch: Monitors system pressure, preventing damage from excessive pressure conditions.
-
Ground Lug Connection: Provides a secure grounding point, ensuring electrical safety.
-
Extended Life Capacitors: Engineered for durability, contributing to the overall longevity of the unit.
-
AHRI Certified: Guarantees compliance with industry performance and efficiency standards.
-
ETL Listed: Meets rigorous safety and performance standards for electrical appliances.
Cabinet Features
-
Removable Grille-Style Top Design: Compliant with UL 60335-2-40, allowing for straightforward maintenance and service access.
-
Venturi for Increased Airflow Velocity: Enhances air circulation efficiency, contributing to superior cooling performance.
-
Architectural Gray Powder-Paint Finish: Offers a durable, corrosion-resistant exterior with 500-hour salt-spray approval for long-lasting aesthetics.
-
Wire Fan Discharge Grille: Protects the fan while facilitating effective airflow.
-
Steel Louver Coil Guard: Shields the coil from physical damage and debris, ensuring optimal operation.
-
Top and Side Maintenance Access: Designed for convenient servicing, making maintenance tasks simpler and faster.
-
Single-Panel Access to Controls: Provides space for field-installed accessories, enhancing installation flexibility.
-
Hurricane-Ready Design: When properly anchored, meets the 2023 Florida Building Code requirements for unit integrity against hurricane-type winds (anchor bracket kits available).
The Goodman 80% AFUE Gas Furnace (80,000 BTU) combines efficiency and performance with its multi-speed ECM blower and single-stage operation, designed for upflow/horizontal installations. This unit features an 80% AFUE rating and Low NOx technology for reduced emissions. A durable aluminized-steel dual-diameter tubular heat exchanger ensures reliable heating, while a single-stage gas valve provides consistent performance. The hot-surface igniter guarantees dependable ignition. It operates quietly with a single-speed draft inducer and includes a self-diagnostic control board for easy troubleshooting. With a heavy-gauge steel cabinet, baked-enamel finish, and foil-faced insulation, this furnace minimizes heat loss and enhances durability, making it an excellent choice for effective home heating.
- NOx Burner Type: Low NOx
- Unit Height: 33-3/8 in
- Unit Width: 21 in
- AFUE: 80 %
- Cooling Capacity Nominal: 48000 Btu/H
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 132 lb
- Model Efficiency: 0.8
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
- High reliability and quality
- Durable and long igniter life
- Provisions for electronic air cleaner and humidifier
- Energy efficient and quiet circulation
- Self-diagnostic control board with constant memory
- Simple installation and setup
- Quiet and simple operation
Product Features For Goodman 80% Efficiency Gas Furnace Low NOx
-
Heavy-duty aluminized-steel dual-diameter tubular heat exchanger: Designed for enhanced durability and efficiency
-
Single-stage gas valve: Provides reliable heating performance
-
Durable hot-surface igniter: Ensures consistent ignition and long life
-
Quiet, single-speed draft inducer: Minimizes noise while effectively venting exhaust
-
Self-diagnostic control board: Simplifies troubleshooting and maintenance
-
Color-coded low-voltage terminals: Facilitates easy wiring and installation
-
Multi-speed ECM blower motor: Offers improved energy efficiency and airflow control
-
California Low NOx emissions models available: Compliant with environmental regulations
-
Installation restriction: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) after October 1, 2019
-
AHRI Certified; ETL Listed: Ensures compliance with efficiency and safety standards
-
GM9S80: Upflow, horizontal left or right
-
GC9S80: Downflow, horizontal left or right
-
Convenient left or right connections for gas and electrical service
-
Heavy-gauge steel cabinet: Features a durable baked-enamel finish
-
Foil-faced insulated heat exchanger: Reduces heat loss and improves efficiency
Goodman 4 Ton R32 Evaporator Coil is designed for horizontal installation, measuring 21" high and 30" wide. Constructed from durable all-aluminum, it optimizes heat exchange and is compatible with R-32 refrigerant. Featuring factory-installed thermal expansion valves for precise refrigerant flow, the coil includes a single front access panel for easy servicing. The rust-resistant thermoplastic drain pan promotes efficient drainage, while the galvanized finish enhances durability. AHRI certified and ETL listed, this coil meets industry standards for reliable performance and safety.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 30 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum Construction: Durable and lightweight, optimizing heat exchange and enhancing efficiency.
-
Optimized for R-32 Refrigerant: Designed for compatibility with R-32 refrigerant, including integrated circuits and manifolds for improved performance.
-
R-32 Sensor: Specifically engineered to ensure optimal functionality throughout the lifespan of the coil.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications, providing precise refrigerant flow control.
-
Standardized Copper Suction Tube Stub Length: Facilitates installation by ensuring consistent sizing across applications.
-
Check Flowrator: Designed for efficient operation in cooling and heat pump applications, enhancing system performance.
-
Horizontal Application Design: Ideal for installation in tight spaces, accommodating various installation needs.
-
21" Depth: Provides easier access for attic installations, improving convenience during maintenance.
-
Single Front Access Panel: Allows quick and easy access to internal components for servicing.
-
Foil-Faced Insulation: Reduces cabinet condensation, improving efficiency and extending the lifespan of the unit.
-
Galvanized Leather Grain-Embossed Finish: Offers a stylish appearance while providing durability against corrosion.
-
Rust-Resistant Thermoplastic Drain Pan: Features a low water-retention design to prevent water buildup and ensure efficient drainage.
-
DecaBDE-Free Thermoplastic Drain Pan: Environmentally friendly design with secondary drain connections for added reliability.
-
Drain Pan Rails: Engineered for easy removal and repositioning of coils without compromising structural integrity.
-
UV-Resistant Drain Pan: Ensures longevity and performance, even in direct sunlight.
-
AHRI Certified: Complies with industry standards for performance and efficiency, ensuring reliable operation.
-
ETL Listed: Meets rigorous safety standards for electrical components, guaranteeing quality and safety.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
