Goodman 2.5 Ton R32 Split Heat Pump 14.3 SEER2 Single Stage 208/240V 1-Ph GLZS4BA3010
The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting. It includes enhanced aluminum fin coils. Additional components include a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. It also has high- and low-pressure switches, service valves with easy access ports, is fully charged for 15 feet of tubing, and includes a fully enclosed contactor with a lug connection. The unit is AHRI Certified and ETL Listed.
- Heating Capacity Nominal: 30000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 39.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 174 lb
- Unit Depth: 29 in
Product Features For Goodman Heat Pump Condenser GLZS4BA3010
-
High-efficiency compressor – Ensures optimal performance and energy savings.
-
SmartShift® technology for quiet, reliable defrost – Reduces noise during defrost cycles.
-
Enhanced aluminum fin coil (5 mm for 1.5T-3.5 Ton) – Improves heat transfer efficiency in smaller models.
-
Enhanced aluminum fin coil (7 mm copper tubes for 4.0-5.0 Ton) – Enhances durability and performance in larger models.
-
Single-speed PSC condenser fan motor – Provides consistent airflow and cooling performance.
-
Factory-installed bi-flow liquid-line filter drier – Protects the system by removing moisture and debris.
-
Factory-installed suction-line accumulator – Prevents liquid refrigerant from damaging the compressor.
-
Factory-installed compressor crankcase heater – Protects the compressor in colder temperatures.
-
Factory-installed high-capacity muffler – Reduces noise and ensures smoother operation.
-
High- and low-pressure switches – Monitors system pressure for safe and efficient operation.
-
Service valves with sweat connections and easy gauge access – Simplifies maintenance and service access.
-
Fully charged for 15’ of tubing – Ready for easy installation with no additional refrigerant needed.
-
Fully enclosed contactor with lug connection – Protects electrical components and ensures secure connections.
-
Ground lug connection – Ensures proper grounding for electrical safety.
-
Capacitors with extended life – Increases reliability and reduces the need for frequent replacements.
-
AHRI Certified; ETL Listed – Meets industry standards for performance and safety.
-
Removable grille-style top design compliant with UL 60335-2-40 – Easy access for maintenance and compliant with safety standards.
-
Steel louver coil guard – Protects the coil from damage and debris.
-
Heavy-gauge galvanized-steel cabinet – Durable construction for long-lasting protection.
-
Architectural Gray powder-paint finish with 500-hour salt-spray approval – Corrosion-resistant finish for harsh environments.
-
Top and side maintenance access – Simplifies service and reduces maintenance time.
-
Meets 2023 Florida Building Code for hurricane-type winds when anchored – Designed to withstand severe weather conditions (Anchor bracket kits available).
The Goodman GM9C961005CN gas furnace delivers exceptional heating efficiency with a 96% AFUE and a powerful 100,000 BTU output. Designed for upflow or horizontal installation (33-3/8" H x 21" W x 28" D), this unit features a multi-speed ECM blower motor that maximizes airflow while reducing energy consumption. Its heavy-duty aluminized-steel and stainless-steel heat exchangers ensure durability and corrosion resistance, enhancing overall efficiency. The two-stage gas valve operates quietly and adapts to heating demands, while a self-diagnostic control board simplifies maintenance. With California 40 ng/J Low NOx compliance and AHRI certification, this furnace is perfect for eco-conscious homeowners seeking reliable, efficient heating solutions.
- Unit Height: 33-3/8 in
- Unit Width: 21 in
- AFUE: 96 %
- 100,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 140 lb
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
Product Features For Goodman 96% Efficiency Gas Furnace 100K BTU
-
Energy-Efficient Multi-Speed ECM Blower Motor: Maximizes airflow efficiency while reducing energy consumption.
-
Heavy-Duty Aluminized-Steel Tubular Heat Exchanger: Provides exceptional durability and efficient heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Enhances overall system efficiency and lifespan with corrosion resistance.
-
Two-Stage Gas Valve: Delivers quiet and economical heating, adapting to varying temperature needs.
-
Durable Silicon Nitride Igniter: Ensures reliable ignition and long-term durability in harsh conditions.
-
Quiet Two-Speed Induced Draft Blower: Reduces operational noise for a more comfortable indoor environment.
-
Self-Diagnostic Control Board: Features LED output for constant memory fault code history, simplifying maintenance and troubleshooting.
-
Color-Coded Low-Voltage Terminals: Facilitates easy wiring for electronic air cleaners and humidifiers.
-
Low Continuous Fan Speed Options: Promotes quiet air circulation, enhancing comfort without disruptive noise.
-
California 40 ng/J Low NOx Compliance: Meets stringent emissions standards, supporting environmental sustainability.
-
SCAQMD Installation Restrictions: Not available for installation in California’s South Coast Air Quality Management District as of October 1, 2019.
-
AHRI Certified & ETL Listed: Ensures performance and safety standards are met for peace of mind.
-
Multi-Position Installation: Versatile configuration options for upflow, horizontal left, or right installation.
-
Ventilation Flexibility: Certified for both direct vent (2-pipe) and non-direct vent (1-pipe) systems.
-
Easy Top Venting with Optional Side Venting: Simplifies installation for GM9S96/upflow models.
-
Convenient Gas and Electrical Service Connections: Left or right connection options allow for flexible installation setups.
-
Low Cabinet Air Leakage: Achieves QLeak ≤ 2% for improved efficiency and reduced energy loss.
-
Heavy-Gauge Steel Cabinet: Built to withstand the test of time with a durable, resilient finish.
-
Fully Insulated Heat Exchanger and Blower Section: Reduces heat loss for enhanced operational efficiency.
-
Airtight Solid Bottom or Side Return: Features easy-cut tabs for simple removal in bottom air-inlet applications, streamlining maintenance.
The Goodman R32 2.5 Ton Cased Evaporator Coil features a compact 21" cabinet designed for horizontal installation, optimized for R-32 refrigerant to enhance efficiency and minimize environmental impact. This all-aluminum evaporator coil ensures superior thermal conductivity, while factory-installed thermal expansion valves (TXV) improve cooling and heat pump applications. The unit includes a single front access panel for easy servicing and foil-faced insulation to reduce cabinet condensation. With rust-resistant thermoplastic drain pans and UV-resistant features, this durable coil meets AHRI certification and ETL listing standards for performance and safety, making it an ideal choice for efficient HVAC systems.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum evaporator coil: Provides superior thermal conductivity and lightweight construction for efficient performance.
-
Optimized for use with R-32 refrigerant: Includes specially designed circuits and manifolds for enhanced efficiency and reduced environmental impact.
-
R-32 sensor: Engineered for the lifespan of the coil, ensuring reliable operation and performance monitoring.
-
CAPTA and CHPTA models: Feature factory-installed thermal expansion valves for efficient cooling and heat pump applications.
-
Standardized copper suction tube stub length: Simplifies installation and compatibility with various systems.
-
Vertical and horizontal models available: Offers flexibility for installation in different spaces and configurations.
-
21" depth: Facilitates easier access in attics for convenient installation and maintenance.
-
Single front access panel: Included in CAPTA and CHPTA models for streamlined servicing.
-
Foil-faced insulation: Covers the internal casing to minimize cabinet condensation and enhance efficiency.
-
Galvanized, leather grain-embossed finish: Provides a durable and aesthetically pleasing exterior for long-lasting use.
-
Rust-resistant, thermoplastic drain pans: Designed with a low water-retention feature to prevent stagnation and buildup.
-
DecaBDE-free thermoplastic drain pan: Equipped with secondary drain connections for improved drainage management.
-
Drain pan rails: Engineered for easy removal and repositioning of coils without compromising structural integrity.
-
UV-resistant drain pan: Enhances durability and longevity by resisting degradation from sunlight exposure.
-
AHRI certified and ETL listed: Ensures compliance with industry standards for performance and safety.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
