Goodman 2.5 Ton R32 Split Heat Pump 14.3 SEER2 30,000 BTU GLZS4BA3010
The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting. It includes enhanced aluminum fin coils. Additional components include a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. It also has high- and low-pressure switches, service valves with easy access ports, is fully charged for 15 feet of tubing, and includes a fully enclosed contactor with a lug connection. The unit is AHRI Certified and ETL Listed.
- Heating Capacity Nominal: 30000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 39.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 174 lb
- Unit Depth: 29 in
Product Features For Goodman Heat Pump Condenser GLZS4BA3010
-
High-efficiency compressor – Ensures optimal performance and energy savings.
-
SmartShift® technology for quiet, reliable defrost – Reduces noise during defrost cycles.
-
Enhanced aluminum fin coil (5 mm for 1.5T-3.5 Ton) – Improves heat transfer efficiency in smaller models.
-
Enhanced aluminum fin coil (7 mm copper tubes for 4.0-5.0 Ton) – Enhances durability and performance in larger models.
-
Single-speed PSC condenser fan motor – Provides consistent airflow and cooling performance.
-
Factory-installed bi-flow liquid-line filter drier – Protects the system by removing moisture and debris.
-
Factory-installed suction-line accumulator – Prevents liquid refrigerant from damaging the compressor.
-
Factory-installed compressor crankcase heater – Protects the compressor in colder temperatures.
-
Factory-installed high-capacity muffler – Reduces noise and ensures smoother operation.
-
High- and low-pressure switches – Monitors system pressure for safe and efficient operation.
-
Service valves with sweat connections and easy gauge access – Simplifies maintenance and service access.
-
Fully charged for 15’ of tubing – Ready for easy installation with no additional refrigerant needed.
-
Fully enclosed contactor with lug connection – Protects electrical components and ensures secure connections.
-
Ground lug connection – Ensures proper grounding for electrical safety.
-
Capacitors with extended life – Increases reliability and reduces the need for frequent replacements.
-
AHRI Certified; ETL Listed – Meets industry standards for performance and safety.
-
Removable grille-style top design compliant with UL 60335-2-40 – Easy access for maintenance and compliant with safety standards.
-
Steel louver coil guard – Protects the coil from damage and debris.
-
Heavy-gauge galvanized-steel cabinet – Durable construction for long-lasting protection.
-
Architectural Gray powder-paint finish with 500-hour salt-spray approval – Corrosion-resistant finish for harsh environments.
-
Top and side maintenance access – Simplifies service and reduces maintenance time.
-
Meets 2023 Florida Building Code for hurricane-type winds when anchored – Designed to withstand severe weather conditions (Anchor bracket kits available).
Goodman 96% AFUE Gas Furnace 60,000 BTU Variable Speed ECM Two Stage Convertible Downflow/Horizontal GCVC960603BN
The Goodman 96% AFUE Gas Furnace (60,000 BTU, Variable Speed ECM, Two Stage, Convertible Downflow/Horizontal) GCVC960603BN is Energy Star certified and designed for optimal efficiency and comfort. It features integrated ComfortBridge Technology for enhanced connectivity, allowing smart home integration. The heavy-duty aluminized-steel tubular heat exchanger ensures durability and effective heat transfer, while the stainless-steel secondary heat exchanger improves efficiency. With a two-stage gas valve for quiet heating, a reliable Silicon Nitride igniter, and a self-diagnostic control board, this unit simplifies troubleshooting. It is designed for multi-position installation, offers versatile venting options, and has a cabinet air leakage rating of ≤ 2% for improved performance.
- Energy Star Certified: Yes
- Unit Height: 34-1/2 in
- Unit Width: 17-1/2 in
- Communication Feature Type: ComfortBridge Technology compatible
- AFUE: 96 %
- Installation Configuration: Downflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Minimum Clearances to Combustible Materials: 1 ft
- Motor Speed Type: Variable Speed ECM
- Unit Weight: 119 lb
- Model Efficiency: 0.96
- Unit Depth: 28.75 in
- Heat Exchanger Type: Gas
Product Features For Goodman 96% Efficiency Two Stage Gas Furnace
-
Integrated communicating ComfortBridge™ Technology: Enhances system performance and connectivity for smart home integration.
-
Commissioning and diagnostics via onboard Bluetooth: Easily access features with the CoolCloud app for smartphones and tablets.
-
Heavy-duty aluminized-steel tubular heat exchanger: Provides robust durability and efficient heat transfer for reliable operation.
-
Stainless-steel secondary heat exchanger: Increases efficiency and longevity by resisting corrosion.
-
Two-stage gas valve: Offers quiet, economical heating with improved comfort control.
-
Durable Silicon Nitride igniter: Ensures reliable ignition and extended service life.
-
Quiet two-speed induced draft blower: Minimizes noise while effectively venting combustion gases.
-
Compatible with any single-stage thermostat: Flexibility for integration with existing systems.
-
Self-diagnostic control board: Features constant memory with fault code history output to a triple 7-segment display for easy troubleshooting.
-
Color-coded low-voltage terminals: Simplifies installation with clear wiring options, including provisions for electronic air cleaners.
-
Efficient variable-speed airflow system: Gently adjusts based on heating or cooling demand for optimal comfort.
-
Multiple continuous fan speed options: Provides quiet air circulation to enhance indoor comfort.
-
Auto-Comfort and enhanced dehumidification modes: Optimize indoor humidity levels for improved air quality.
-
California 40 ng/J Low NOx emissions compliant: Meets strict environmental standards for cleaner air.
-
Installation restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) after October 1, 2019.
-
AHRI Certified; ETL Listed: Confirms adherence to industry standards for safety and performance.
-
Designed for multi-position installation: Suitable for downflow, horizontal left or right configurations.
-
Certified for direct vent (2-pipe) or non-direct vent (1-pipe): Versatile venting options for various installations.
-
Easy-to-install top venting with optional side venting: Streamlines installation for diverse applications.
-
Convenient left or right connection for gas and electrical service: Offers flexible installation options.
-
Cabinet air leakage ≤ 2%: Ensures energy efficiency and optimal performance.
-
Heavy-gauge steel cabinet with durable finish: Provides lasting protection and aesthetic appeal.
-
Fully insulated heat exchanger and blower section: Enhances efficiency and reduces noise levels.
-
Airtight solid bottom or side return: Features easy-cut tabs for effortless removal in bottom air-inlet applications.
Goodman 2.5 Ton R32 Cased Evaporator Coil, Horizontal-A design with a 17.5"H x 26"W cabinet, features durable all-aluminum construction and is optimized for R-32 refrigerant. This coil includes factory-installed thermal expansion valves, ensuring efficient operation for both cooling and heat pump systems. Its compact 21" depth facilitates easy installation in tight spaces. The design incorporates a rust-resistant thermoplastic drain pan and foil-faced insulation to minimize condensation. AHRI certified and ETL listed, it meets high safety and performance standards.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum evaporator coil: Durable construction for reliable, efficient cooling.
-
Optimized for R-32 refrigerant: Built-in circuits and manifolds enhance R-32 compatibility.
-
R-32 sensor: Designed to last the coil’s lifetime, ensuring performance consistency.
-
Factory-installed thermal expansion valves: Supports both cooling and heat pump systems.
-
Standardized copper suction tube: Simplifies installation with a consistent stub length.
-
Check flowrator: Ensures precise flow control for various applications.
-
Horizontal application: Suited for versatile installation setups.
-
21" depth: Compact for improved attic access.
-
Single front access panel: Easy servicing and maintenance access.
-
Foil-faced insulation: Reduces condensation within the cabinet.
-
Galvanized, leather grain-embossed finish: Offers added durability and rust resistance.
-
Rust-resistant, thermoplastic drain pan: Low water-retention design prevents stagnation.
-
DecaBDE-free thermoplastic drain pan: Features secondary drain connections for optimal drainage.
-
Drain pan rails: Designed for easy coil removal without structural compromise.
-
UV-resistant drain pan: Resists sun damage for long-lasting durability.
-
AHRI certified and ETL Listed: Meets strict safety and quality standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
