Goodman 2.5 Ton R32 Split Heat Pump 14.3 SEER2 30,000 BTU GLZS4BA3010
The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting. It includes enhanced aluminum fin coils. Additional components include a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. It also has high- and low-pressure switches, service valves with easy access ports, is fully charged for 15 feet of tubing, and includes a fully enclosed contactor with a lug connection. The unit is AHRI Certified and ETL Listed.
- Heating Capacity Nominal: 30000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 39.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 174 lb
- Unit Depth: 29 in
Product Features For Goodman Heat Pump Condenser GLZS4BA3010
-
High-efficiency compressor – Ensures optimal performance and energy savings.
-
SmartShift® technology for quiet, reliable defrost – Reduces noise during defrost cycles.
-
Enhanced aluminum fin coil (5 mm for 1.5T-3.5 Ton) – Improves heat transfer efficiency in smaller models.
-
Enhanced aluminum fin coil (7 mm copper tubes for 4.0-5.0 Ton) – Enhances durability and performance in larger models.
-
Single-speed PSC condenser fan motor – Provides consistent airflow and cooling performance.
-
Factory-installed bi-flow liquid-line filter drier – Protects the system by removing moisture and debris.
-
Factory-installed suction-line accumulator – Prevents liquid refrigerant from damaging the compressor.
-
Factory-installed compressor crankcase heater – Protects the compressor in colder temperatures.
-
Factory-installed high-capacity muffler – Reduces noise and ensures smoother operation.
-
High- and low-pressure switches – Monitors system pressure for safe and efficient operation.
-
Service valves with sweat connections and easy gauge access – Simplifies maintenance and service access.
-
Fully charged for 15’ of tubing – Ready for easy installation with no additional refrigerant needed.
-
Fully enclosed contactor with lug connection – Protects electrical components and ensures secure connections.
-
Ground lug connection – Ensures proper grounding for electrical safety.
-
Capacitors with extended life – Increases reliability and reduces the need for frequent replacements.
-
AHRI Certified; ETL Listed – Meets industry standards for performance and safety.
-
Removable grille-style top design compliant with UL 60335-2-40 – Easy access for maintenance and compliant with safety standards.
-
Steel louver coil guard – Protects the coil from damage and debris.
-
Heavy-gauge galvanized-steel cabinet – Durable construction for long-lasting protection.
-
Architectural Gray powder-paint finish with 500-hour salt-spray approval – Corrosion-resistant finish for harsh environments.
-
Top and side maintenance access – Simplifies service and reduces maintenance time.
-
Meets 2023 Florida Building Code for hurricane-type winds when anchored – Designed to withstand severe weather conditions (Anchor bracket kits available).
Goodman 96% AFUE Gas Furnace 60,000 BTU Multi Speed ECM Single Stage Downflow/Horizontal GC9S960603BN
The Goodman GC9S960603BN 96% AFUE Gas Furnace delivers 60,000 BTU output, featuring multi-speed ECM technology for efficient and quiet operation. Designed for downflow or horizontal installation, it boasts a durable aluminized-steel heat exchanger and a stainless-steel secondary heat exchanger for enhanced efficiency. This unit includes a reliable single-stage gas valve and a Silicon Nitride igniter to minimize maintenance needs. With a self-diagnostic control board, lower NOx emissions compliance, and compatibility with single-stage and two-stage thermostats, it ensures optimal performance and comfort. The furnace meets AHRI certification and ETL safety standards, making it a solid choice for eco-friendly heating solutions.
- Unit Height: 33-3/8 in
- Unit Width: 17-1/2 in
- AFUE: 96 %
- 57,660 BTU output
- Installation Configuration: Downflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 116 lb
- Model Efficiency: 0.96
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
-
High reliability and quality
- Faster condensate drainage with no leakage
- Long-lasting igniter
- Provisions for electronic air cleaner and humidifier
-
Energy-efficient and quiet operation
- Lower NOx emissions
-
Self-diagnostic control board with memory
- Meets AHRI certification and ETL safety standards
- Compatible with two-stage and single-stage thermostats
- Easy connections for air cleaner and humidifier
Product Features For Goodman GC9S960603BN 96% Efficiency Gas Furnace
-
Heavy-duty aluminized-steel tubular heat exchanger: Engineered for maximum durability and efficient heat transfer, ensuring long-lasting performance.
-
Stainless-steel secondary heat exchanger: Enhances overall efficiency and corrosion resistance, extending the lifespan of the unit.
-
Single-stage gas valve: Provides reliable operation and simplifies control for consistent heating.
- Durable Silicon Nitride igniter: Known for its longevity and reliability, minimizing maintenance needs.
-
Quiet single-speed induced draft blower: Ensures efficient airflow while maintaining a peaceful indoor environment.
-
Self-diagnostic control board: Features constant memory and LED fault code history for easy troubleshooting and enhanced reliability.
- All models meet California 40 ng/J Low NOx emissions standard: Promotes environmentally responsible heating solutions.
- Installation restrictions in California’s SCAQMD after October 1, 2019: Compliance with regional air quality regulations.
-
AHRI Certified and ETL Listed: Guarantees adherence to industry standards for performance and safety.
- Multi-position installation: Offers flexibility for upflow, horizontal, or downflow configurations, accommodating various spaces.
- Certified for direct vent (2-pipe) and non-direct vent (1-pipe): Versatile venting options for different installation needs.
- Easy-to-install top venting with optional side venting: Simplifies setup for GM9S96/upflow models, enhancing convenience.
- Convenient left or right connection for gas and electrical service: Facilitates straightforward installation and accessibility.
-
Cabinet air leakage (QLeak) ≤ 2%: Ensures optimal efficiency and energy savings through minimal leakage.
-
Heavy-gauge steel cabinet: Provides robust protection and a durable finish for long-lasting use.
- Fully insulated heat exchanger and blower section: Enhances efficiency by reducing heat loss and improving comfort.
- Airtight solid bottom or side return: Designed with easy-cut tabs for effortless removal in bottom air-inlet applications, streamlining maintenance.
Goodman 2.5 Ton R32 Cased Evaporator Coil, Horizontal-A design with a 17.5"H x 26"W cabinet, features durable all-aluminum construction and is optimized for R-32 refrigerant. This coil includes factory-installed thermal expansion valves, ensuring efficient operation for both cooling and heat pump systems. Its compact 21" depth facilitates easy installation in tight spaces. The design incorporates a rust-resistant thermoplastic drain pan and foil-faced insulation to minimize condensation. AHRI certified and ETL listed, it meets high safety and performance standards.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum evaporator coil: Durable construction for reliable, efficient cooling.
-
Optimized for R-32 refrigerant: Built-in circuits and manifolds enhance R-32 compatibility.
-
R-32 sensor: Designed to last the coil’s lifetime, ensuring performance consistency.
-
Factory-installed thermal expansion valves: Supports both cooling and heat pump systems.
-
Standardized copper suction tube: Simplifies installation with a consistent stub length.
-
Check flowrator: Ensures precise flow control for various applications.
-
Horizontal application: Suited for versatile installation setups.
-
21" depth: Compact for improved attic access.
-
Single front access panel: Easy servicing and maintenance access.
-
Foil-faced insulation: Reduces condensation within the cabinet.
-
Galvanized, leather grain-embossed finish: Offers added durability and rust resistance.
-
Rust-resistant, thermoplastic drain pan: Low water-retention design prevents stagnation.
-
DecaBDE-free thermoplastic drain pan: Features secondary drain connections for optimal drainage.
-
Drain pan rails: Designed for easy coil removal without structural compromise.
-
UV-resistant drain pan: Resists sun damage for long-lasting durability.
-
AHRI certified and ETL Listed: Meets strict safety and quality standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
