Goodman 2.5 Ton R32 Split Heat Pump Condenser 14.5 SEER2 30,000 BTU GLZS4BA3010
The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting. It includes enhanced aluminum fin coils. Additional components include a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. It also has high- and low-pressure switches, service valves with easy access ports, is fully charged for 15 feet of tubing, and includes a fully enclosed contactor with a lug connection. The unit is AHRI Certified and ETL Listed.
- Heating Capacity Nominal: 30000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.5
- Unit Height: 39.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 174 lb
- Unit Depth: 29 in
Product Features For Goodman Heat Pump Condenser GLZS4BA3010
-
High-efficiency compressor – Ensures optimal performance and energy savings.
-
SmartShift® technology for quiet, reliable defrost – Reduces noise during defrost cycles.
-
Enhanced aluminum fin coil (5 mm for 1.5T-3.5 Ton) – Improves heat transfer efficiency in smaller models.
-
Enhanced aluminum fin coil (7 mm copper tubes for 4.0-5.0 Ton) – Enhances durability and performance in larger models.
-
Single-speed PSC condenser fan motor – Provides consistent airflow and cooling performance.
-
Factory-installed bi-flow liquid-line filter drier – Protects the system by removing moisture and debris.
-
Factory-installed suction-line accumulator – Prevents liquid refrigerant from damaging the compressor.
-
Factory-installed compressor crankcase heater – Protects the compressor in colder temperatures.
-
Factory-installed high-capacity muffler – Reduces noise and ensures smoother operation.
-
High- and low-pressure switches – Monitors system pressure for safe and efficient operation.
-
Service valves with sweat connections and easy gauge access – Simplifies maintenance and service access.
-
Fully charged for 15’ of tubing – Ready for easy installation with no additional refrigerant needed.
-
Fully enclosed contactor with lug connection – Protects electrical components and ensures secure connections.
-
Ground lug connection – Ensures proper grounding for electrical safety.
-
Capacitors with extended life – Increases reliability and reduces the need for frequent replacements.
-
AHRI Certified; ETL Listed – Meets industry standards for performance and safety.
-
Removable grille-style top design compliant with UL 60335-2-40 – Easy access for maintenance and compliant with safety standards.
-
Steel louver coil guard – Protects the coil from damage and debris.
-
Heavy-gauge galvanized-steel cabinet – Durable construction for long-lasting protection.
-
Architectural Gray powder-paint finish with 500-hour salt-spray approval – Corrosion-resistant finish for harsh environments.
-
Top and side maintenance access – Simplifies service and reduces maintenance time.
-
Meets 2023 Florida Building Code for hurricane-type winds when anchored – Designed to withstand severe weather conditions (Anchor bracket kits available).
Goodman 80% AFUE Gas Furnace 80,000 BTU Multi Speed ECM Two Stage Upflow/Horizontal Low NOx GM9C800804BX
The Goodman 80% AFUE Gas Furnace, 80,000 BTU, provides efficient two-stage heating and multi-speed ECM operation in an upflow/horizontal setup (GM9C800804BX). This Low NOx model includes a durable, quiet two-stage gas valve for enhanced comfort, SureStart® Silicon Nitride igniter for reliability, and an ECM motor that optimizes energy use. The self-diagnostic control board, quiet two-speed induced draft blower, and support for air cleaners and humidifiers add value. California Low NOx compliant models are available, and AHRI and ETL certifications ensure safety and efficiency.
- NOx Burner Type: Low NOx
- Unit Height: 33-3/8 in
- Unit Width: 17-1/2 in
- AFUE: 80 %
- Cooling Capacity Nominal: 48000 Btu/H
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 121 lb
- Model Efficiency: 0.8
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
- High reliability and quality
- Durable, long-lasting igniter
- Supports electronic air cleaner and humidifier
- Quiet, economical heating
- Energy-efficient, quiet circulation
- Self-diagnostic control board with constant memory
- Compatible with two-stage or single-stage thermostats
- Easy connection for EAC and humidifier
Product Features For Goodman 80% Efficiency Low NOx Gas Furnace
-
Two-stage gas valve: Provides quiet and economical heating for enhanced comfort
-
Efficient multi-speed ECM circulator motor: Ensures quiet operation and optimal energy efficiency
-
SureStart® Silicon Nitride igniter: Built for extended igniter life and reliable starts
-
Self-diagnostic control board: Offers easy troubleshooting and maintenance
-
Low constant fan speed: Maintains consistent, quiet air circulation throughout the home
-
Quiet, two-speed induced draft blower: Reduces noise while maintaining smooth airflow
-
California Low NOx emissions models available: Meets state emissions standards for cleaner operation
-
Installation restriction: Cannot be installed in California’s SCAQMD region after October 1, 2019
-
AHRI Certified; ETL Listed: Verified for efficiency and safety
Cabinet Features
-
Fully insulated, heavy-gauge steel cabinet: Durable baked-enamel finish for longevity
-
Multi-position installation:
-
GM9C80: Upflow, horizontal left or right
-
GC9C80: Downflow, horizontal left or right
-
Removable bottom panel: Suitable for side- or bottom-return applications
-
Convenient left or right connections for gas and electrical service
-
Cabinet air leakage ≤ 2%: Optimized for energy efficiency
-
Flush fit for coil and furnace: Ideal for seamless installations
Goodman 2.5 Ton R32 Cased Evaporator Coil, Horizontal-A design with a 17.5"H x 26"W cabinet, features durable all-aluminum construction and is optimized for R-32 refrigerant. This coil includes factory-installed thermal expansion valves, ensuring efficient operation for both cooling and heat pump systems. Its compact 21" depth facilitates easy installation in tight spaces. The design incorporates a rust-resistant thermoplastic drain pan and foil-faced insulation to minimize condensation. AHRI certified and ETL listed, it meets high safety and performance standards.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum evaporator coil: Durable construction for reliable, efficient cooling.
-
Optimized for R-32 refrigerant: Built-in circuits and manifolds enhance R-32 compatibility.
-
R-32 sensor: Designed to last the coil’s lifetime, ensuring performance consistency.
-
Factory-installed thermal expansion valves: Supports both cooling and heat pump systems.
-
Standardized copper suction tube: Simplifies installation with a consistent stub length.
-
Check flowrator: Ensures precise flow control for various applications.
-
Horizontal application: Suited for versatile installation setups.
-
21" depth: Compact for improved attic access.
-
Single front access panel: Easy servicing and maintenance access.
-
Foil-faced insulation: Reduces condensation within the cabinet.
-
Galvanized, leather grain-embossed finish: Offers added durability and rust resistance.
-
Rust-resistant, thermoplastic drain pan: Low water-retention design prevents stagnation.
-
DecaBDE-free thermoplastic drain pan: Features secondary drain connections for optimal drainage.
-
Drain pan rails: Designed for easy coil removal without structural compromise.
-
UV-resistant drain pan: Resists sun damage for long-lasting durability.
-
AHRI certified and ETL Listed: Meets strict safety and quality standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
