Goodman 2.5 Ton R32 Split Heat Pump 14.5 SEER2 Single Stage 208/240V 1-Ph GLZS4BA3010
The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting. It includes enhanced aluminum fin coils. Additional components include a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. It also has high- and low-pressure switches, service valves with easy access ports, is fully charged for 15 feet of tubing, and includes a fully enclosed contactor with a lug connection. The unit is AHRI Certified and ETL Listed.
- Heating Capacity Nominal: 30000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.5
- Unit Height: 39.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 174 lb
- Unit Depth: 29 in
Product Features For Goodman Split Heat Pump GLZS4BA3010
-
High-efficiency compressor – Ensures optimal performance and energy savings.
-
SmartShift® technology for quiet, reliable defrost – Reduces noise during defrost cycles.
-
Enhanced aluminum fin coil (5 mm for 1.5T-3.5 Ton) – Improves heat transfer efficiency in smaller models.
-
Enhanced aluminum fin coil (7 mm copper tubes for 4.0-5.0 Ton) – Enhances durability and performance in larger models.
-
Single-speed PSC condenser fan motor – Provides consistent airflow and cooling performance.
-
Factory-installed bi-flow liquid-line filter drier – Protects the system by removing moisture and debris.
-
Factory-installed suction-line accumulator – Prevents liquid refrigerant from damaging the compressor.
-
Factory-installed compressor crankcase heater – Protects the compressor in colder temperatures.
-
Factory-installed high-capacity muffler – Reduces noise and ensures smoother operation.
-
High- and low-pressure switches – Monitors system pressure for safe and efficient operation.
-
Service valves with sweat connections and easy gauge access – Simplifies maintenance and service access.
-
Fully charged for 15’ of tubing – Ready for easy installation with no additional refrigerant needed.
-
Fully enclosed contactor with lug connection – Protects electrical components and ensures secure connections.
-
Ground lug connection – Ensures proper grounding for electrical safety.
-
Capacitors with extended life – Increases reliability and reduces the need for frequent replacements.
-
AHRI Certified; ETL Listed – Meets industry standards for performance and safety.
-
Removable grille-style top design compliant with UL 60335-2-40 – Easy access for maintenance and compliant with safety standards.
-
Steel louver coil guard – Protects the coil from damage and debris.
-
Heavy-gauge galvanized-steel cabinet – Durable construction for long-lasting protection.
-
Architectural Gray powder-paint finish with 500-hour salt-spray approval – Corrosion-resistant finish for harsh environments.
-
Top and side maintenance access – Simplifies service and reduces maintenance time.
-
Meets 2023 Florida Building Code for hurricane-type winds when anchored – Designed to withstand severe weather conditions (Anchor bracket kits available).
Upgrade your home heating with the Goodman R32 gas furnace, offering an impressive 92% AFUE efficiency and a robust 60,000 BTU capacity. Designed for versatile installation in upflow or horizontal configurations, this unit features a durable aluminized-steel heat exchanger and a stainless-steel secondary heat exchanger for enhanced performance and longevity. With a multi-speed ECM blower motor, enjoy energy-efficient airflow and minimal noise. Its self-diagnostic control board simplifies maintenance, while compliance with California's low NOx standards ensures eco-friendliness. AHRI certified and ETL listed, this furnace guarantees reliability and safety, making it the perfect choice for efficient home comfort.
- Unit Height: 33-3/8 in
- Unit Width: 17-1/2 in
- AFUE: 92 %
- 60,000 BTU
- R32
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 114 lb
- Model Efficiency: 0.92
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
Standard Features of R32 Highly Efficient 92% AFUE Gas Furnace
-
Heavy-duty Aluminized-Steel Tubular Heat Exchanger: Ensures durability and efficient heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Provides enhanced performance and longevity.
-
Single-Stage Gas Valve: Simplifies operation with reliable gas control.
-
Durable Silicon Nitride Igniter: Offers consistent ignition performance.
-
Multi-Speed ECM Blower Motor: Delivers energy-efficient airflow and improved comfort.
-
Quiet Single-Speed Induced Draft Blower: Ensures minimal operational noise.
-
Self-Diagnostic Control Board: Facilitates easy troubleshooting and maintenance.
-
California Compliance: Meets the 40 ng/J Low NOx emissions standard.
-
Installation Restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
-
AHRI Certified & ETL Listed: Guarantees high efficiency and safety standards.
-
Multi-Position Installation: Designed for upflow, horizontal left, or right configurations.
-
Ventilation Options: Certified for direct vent (2-pipe) or non-direct vent (1-pipe) setups.
-
Flexible Venting: Easy-to-install top venting with optional side venting for GR9S92/upflow models.
-
Convenient Gas & Electrical Connections: Available on the left or right side for easier installation.
Cabinet Features
-
Low Air Leakage: Cabinet air leakage (QLeak) ≤ 2% for energy efficiency.
-
Heavy-Gauge Steel Cabinet: Built to withstand wear with a durable finish.
-
Insulated Heat Exchanger Cabinet: Foil-faced insulation improves energy efficiency.
-
Airtight Bottom or Side Return: Features easy-cut tabs for hassle-free removal in bottom air-inlet applications.
Goodman 3 Ton R32 Evaporator Coil Upflow/Downflow 21"W x 26"H CAPTA3626C3
The Goodman CAPTA3626C3 Evaporator Coil is a high-performance, all-aluminum unit designed for R-32 refrigerant. With integrated thermal expansion valves, it efficiently supports both cooling and heat pump applications. Its flexible installation options allow for upflow or downflow configurations, while a compact 21-inch depth ensures easy access in tight spaces like attics. Featuring foil-faced insulation to minimize condensation, the coil also includes a rust-resistant, UV-resistant drain pan with extra drainage connections. The durable galvanized finish and easy-to-remove drain pan rails enhance maintenance convenience. AHRI certified and ETL listed, this evaporator coil promises exceptional efficiency and long-lasting performance.
- Refrigerant Type: R-32
- Unit Height: 26 in
- Unit Width: 21 in
- Cased/Uncased: Cased
- Tonnage: 3.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
Product Features Goodman 3 Ton R32 Vertical Evaporator Coil CAPTA3626C3
-
High-Performance All-Aluminum Design: Engineered for durability and efficiency with R-32 refrigerant compatibility.
-
Integrated Thermal Expansion Valves: Factory-installed for optimal performance in both cooling and heat pump applications.
-
Flexible Installation Options: Suitable for vertical and horizontal configurations to fit various HVAC setups.
-
Compact 21-Inch Depth: Facilitates easy access in tight spaces, such as attics, for convenient installation and maintenance.
-
Foil-Faced Insulation: Reduces condensation, improving overall efficiency and performance.
-
Rust-Resistant, UV-Resistant Drain Pan: Durable design with low water retention and additional drainage connections for reliability.
-
Galvanized Finish: Leather grain-embossed for enhanced longevity and aesthetic appeal.
-
Easy-to-Remove Drain Pan Rails: Simplifies maintenance and coil repositioning for hassle-free service.
-
AHRI Certified and ETL Listed: Ensures safety, efficiency, and compliance with industry standards.
-
Optimized for R-32 Refrigerant: Designed with circuits and manifolds specifically for R-32, enhancing eco-friendliness.
-
Standardized Copper Suction Tube Stub Length: Simplifies installation and compatibility with existing systems.
-
Single Front Access Panel: Provides easy access for maintenance and inspection on CAPTA and CHPTA models.
Upgrade to the Goodman CAPTA3626C3 Evaporator Coil for a reliable, efficient HVAC solution tailored to modern needs!
