The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman Gas Furnace 96% AFUE 60,000 BTU Two-Stage Variable-Speed Upflow/Horizontal GMVC960603BN
Incorporating cutting-edge technology for exceptional efficiency, a two-stage burner, and a variable-speed blower motor, the GMVC960603BN gas furnace stands as a remarkable achievement from Goodman. Augmented durability and reliability ensure that this Goodman gas furnace delivers consistent performance over its entire lifespan, translating to long-term cost savings.
- Energy Star Certified: Yes
- Unit Height: 34.5 in
- Unit Width: 17.5 in
- Communication Feature Type: ComfortBridge Technology compatible
- AFUE: 96 %
- 60,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Variable Speed ECM
- Unit Weight: 117.000 lb
- Unit Depth: 29 in
-
60,000 BTU heating power for medium-sized homes.
-
96% AFUE efficiency for minimal gas wastage.
-
Two-stage variable-speed blower motor for precise airflow.
-
Aluminized steel tubular heat exchanger for reliable heat transfer.
-
Thick steel outer casing for reduced air leakage and noise.
-
Versatile installation with upflow and horizontal options.
-
Natural gas or propane capable with LP conversion kit.
-
Durable and reliable construction for winter performance.
Product Features For Goodman 96% AFUE High Efficiency Gas Furnace GMVC960603BN
-
ComfortBridge™ Technology for integrated communication
-
Bluetooth commissioning and diagnostics via CoolCloud app
-
Heavy-duty aluminized-steel heat exchanger for durability
-
Stainless-steel secondary heat exchanger for added efficiency
-
Two-stage gas valve for quiet, economical heating
-
Silicon Nitride igniter for long-lasting ignition
-
Two-speed induced draft blower for quiet operation
- Compatible with single-stage thermostats
-
Self-diagnostic control board with constant memory and fault code history
-
Color-coded low-voltage terminals for easy setup with electronic air cleaner
-
Variable-speed airflow system for efficient and quiet operation
-
Continuous fan speed options for enhanced air circulation
-
Auto-Comfort and dehumidification modes for improved comfort
- California Low NOx emissions compliant
-
Not installable in SCAQMD regions after October 1, 2019
-
Multi-position installation for upflow and horizontal configurations
-
Direct and non-direct venting options available
-
Top venting installation with optional side venting
-
Left or right connection for gas and electrical service
-
Low cabinet air leakage (QLeak ≤ 2%)
-
Heavy-gauge steel cabinet with durable baked-enamel finish
-
Fully insulated heat exchanger and blower section for efficiency
-
Airtight solid bottom or side return with easy-cut tabs for installation
Goodman 2 Ton R32 Horizontal Evaporator Coil 26"W x 17.5"H CHPTA2426B3
This high-performance evaporator coil is designed for R-32 refrigerant and includes integrated thermal expansion valves for cooling and heat pump applications. It offers flexible installation with both vertical and horizontal models and a 21-inch depth for easy attic access. Equipped with foil-faced insulation to reduce condensation, it features a rust-resistant, UV-resistant drain pan with extra drainage connections. Its durable galvanized finish and removable drain pan rails enhance longevity and maintenance. Certified by AHRI and ETL listed, this coil provides efficiency, durability, and ease of use for a reliable HVAC solution.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
- R-32 refrigerant optimized coil
- R-32 sensor lifespan
- Thermal expansion valves
- Copper suction tube stub
- Check Flowrator design
- Horizontal installation evaporator
- Compact attic access coil
- Foil-faced insulation benefits
- Durable galvanized finish
- Rust-resistant drain pan
- Secondary drain connections
- UV-resistant coil design
- AHRI certified efficiency
Product Features For R32 Horizontal Evaporator Coil
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds designed for efficiency.
-
R-32 Sensor: Enhances the coil's lifespan.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications.
-
Standardized Copper Suction Tube Stub: Ensures compatibility and ease of installation.
-
Check Flowrator: Designed for cooling and heat pump systems.
-
Horizontal Application: Specifically designed for horizontal installation.
-
Compact Depth: 21" depth for easier attic access.
-
Single Front Access Panel: Facilitates maintenance and service.
-
Foil-Faced Insulation: Reduces cabinet condensation.
-
Durable Finish: Galvanized leather grain-embossed finish for longevity.
-
Rust-Resistant Drain Pan: Low water-retention design with DecaBDE-free thermoplastic.
-
Secondary Drain Connections: For added drainage flexibility.
-
Easy Removal: Drain pan rails allow for quick repositioning of coils.
-
UV-Resistant: Designed for long-lasting performance.
-
AHRI Certified: Ensures compliance with industry standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
