The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 96% AFUE Gas Furnace 80,000 BTU Two-Stage Upflow/Horizontal Multi-Speed GM9C960804CN
The Goodman 96% AFUE Gas Furnace, 80,000 BTU, model GM9C960804CN, offers efficient heating for upflow/horizontal installations. Featuring a multi-speed ECM blower motor, aluminized-steel tubular heat exchanger, and stainless-steel secondary heat exchanger, it ensures durability and optimal performance. The two-stage gas valve provides economical heating, while the Silicon Nitride igniter guarantees reliable operation. Additional features include a self-diagnostic control board, low-voltage terminals for air cleaner and humidifier integration, and quiet low-speed fan options.
- Unit Height: 33-3/8 in
- Unit Width: 21 in
- AFUE: 96 %
- 80,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 20 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 123 lb
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
Product Features For Goodman 96% AFUE Highly Efficient Gas Furnace
-
Energy-efficient multi-speed ECM blower motor for optimal performance
-
Heavy-duty aluminized-steel tubular heat exchanger ensures durability
-
Stainless-steel secondary heat exchanger enhances efficiency
-
Two-stage gas valve provides quiet and economical heating
-
Durable Silicon Nitride igniter for reliable ignition
-
Quiet two-speed induced draft blower for improved comfort
-
Self-diagnostic control board with constant memory fault code history output to an LED for easy troubleshooting
-
Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier
-
Low continuous fan speed options deliver quiet air circulation
- All models comply with California 40 ng/J Low NOx emissions standard
- Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) after October 1, 2019
-
AHRI Certified and ETL Listed for safety and performance
- Designed for multi-position installation — upflow, horizontal left or right
- Certified for direct vent (2-pipe) or non-direct vent (1-pipe) applications
- Easy-to-install top venting with optional side venting
-
Convenient left or right connection for gas and electrical service
-
Cabinet air leakage (QLeak) ≤ 2% for efficiency
-
Heavy-gauge steel cabinet with a durable finish
- Fully insulated heat exchanger and blower section for reduced noise
-
Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications
The Goodman R32 2.5 Ton Cased Evaporator Coil features a compact 21" cabinet designed for horizontal installation, optimized for R-32 refrigerant to enhance efficiency and minimize environmental impact. This all-aluminum evaporator coil ensures superior thermal conductivity, while factory-installed thermal expansion valves (TXV) improve cooling and heat pump applications. The unit includes a single front access panel for easy servicing and foil-faced insulation to reduce cabinet condensation. With rust-resistant thermoplastic drain pans and UV-resistant features, this durable coil meets AHRI certification and ETL listing standards for performance and safety, making it an ideal choice for efficient HVAC systems.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal Evaporator Coil
-
All-Aluminum evaporator coil: Provides superior thermal conductivity and lightweight construction for efficient performance.
-
Optimized for use with R-32 refrigerant: Includes specially designed circuits and manifolds for enhanced efficiency and reduced environmental impact.
-
R-32 sensor: Engineered for the lifespan of the coil, ensuring reliable operation and performance monitoring.
-
CAPTA and CHPTA models: Feature factory-installed thermal expansion valves for efficient cooling and heat pump applications.
-
Standardized copper suction tube stub length: Simplifies installation and compatibility with various systems.
-
Vertical and horizontal models available: Offers flexibility for installation in different spaces and configurations.
-
21" depth: Facilitates easier access in attics for convenient installation and maintenance.
-
Single front access panel: Included in CAPTA and CHPTA models for streamlined servicing.
-
Foil-faced insulation: Covers the internal casing to minimize cabinet condensation and enhance efficiency.
-
Galvanized, leather grain-embossed finish: Provides a durable and aesthetically pleasing exterior for long-lasting use.
-
Rust-resistant, thermoplastic drain pans: Designed with a low water-retention feature to prevent stagnation and buildup.
-
DecaBDE-free thermoplastic drain pan: Equipped with secondary drain connections for improved drainage management.
-
Drain pan rails: Engineered for easy removal and repositioning of coils without compromising structural integrity.
-
UV-resistant drain pan: Enhances durability and longevity by resisting degradation from sunlight exposure.
-
AHRI certified and ETL listed: Ensures compliance with industry standards for performance and safety.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
