Goodman 3 Ton R32 Split Heat Pump Condenser 14.3 SEER2 36000 BTU GLZS4BA3610
This high-efficiency system features a Smart-Shift compressor for quiet defrosting and enhanced aluminum fin coils for optimal performance. It includes a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and a high-capacity muffler. With high- and low-pressure switches and easy access service valves, it’s fully charged for 15 feet of tubing. The cabinet, made from heavy-gauge galvanized steel, has a removable grille-style top, steel louver coil guard, and a durable Architectural Gray powder-coat finish, meeting 2023 Florida Building Code requirements for hurricane winds.
- Heating Capacity Nominal: 36000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 15
- Unit Height: 35.75 in
- Unit Width: 35.5 in
- Max Overcurrent Protection: 35 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 208 lb
- Model Efficiency: 15.2 SEER2
- Unit Depth: 35.5 in
Product Features For Goodman 3 Ton R32 Split Heat Pump GLZS4BA3610
-
High-efficiency compressor for optimal cooling performance
-
SmartShift® technology ensures quiet, reliable defrost cycles
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5 to 3.5-ton units and 7 mm diameter copper tubes for 4.0 to 5.0-ton units
-
Single-speed PSC condenser fan motor for consistent airflow
-
Factory-installed components: bi-flow liquid-line filter drier, suction-line accumulator, compressor crankcase heater, high-capacity muffler
-
High- and low-pressure switches for added safety
-
Service valves with sweat connections for easy access to gauge ports
-
Fully charged for 15’ of tubing length
-
Fully enclosed contactor with lug connection and ground lug connection
-
Extended-life capacitors for durability
-
AHRI Certified and ETL Listed
-
Removable grille-style top compliant with UL 60335-2-40
-
Steel louver coil guard for protection
-
Heavy-gauge galvanized-steel cabinet with an Architectural Gray powder-paint finish (500-hour salt-spray approval)
-
Top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code unit integrity requirements for hurricane-type winds (anchor bracket kits available)
Goodman Gas Furnace Upflow/Horizontal 80% AFUE 100,000 BTU Single Stage GM9S801005CN
The Goodman 5 Ton Gas Furnace GM9S801005CN is a powerful and versatile heating solution, delivering 100,000 BTU of warmth for your home. Designed for upflow or horizontal installation, this multi-speed furnace ensures consistent comfort throughout your space. Its single-stage operation optimizes efficiency, making it an ideal choice for energy-conscious homeowners. Built with durable materials and advanced engineering, this furnace promises reliability and longevity. Enjoy cozy winters with the trusted performance of Goodman, designed to keep your home warm and inviting.
- Unit Height: 33.375 in
- Unit Width: 21 in
- AFUE: 80 %
- 100,000 BTU Input
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Nine Speed ECM
- Unit Weight: 132 lb
- Unit Depth: 28 in
- High reliability and quality
- Durable and long-igniter life
- Provisions for electronic air cleaner and humidifier
-
Energy efficient and quiet circulation
-
Self-diagnostic control board with constant memory
- Simple installation and setup
-
Quiet and simple operation
Product Features For Goodman 80% AFUE 100,000 BTU Gas Furnace
-
Heavy-duty aluminized-steel dual-diameter tubular heat exchanger for enhanced durability and heat transfer.
-
Single-stage gas valve provides reliable performance and efficient operation.
-
Durable hot-surface igniter ensures consistent ignition and long-lasting service life.
-
Quiet, single-speed draft induced blower minimizes noise while maximizing airflow.
-
Self-diagnostic control board simplifies troubleshooting with constant memory capabilities.
-
Color-coded low-voltage terminals for easy wiring and installation.
-
Multi-speed ECM blower motor optimizes airflow and efficiency based on demand.
-
California Low NOx emissions models available to meet environmental regulations.
-
Installation restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
-
AHRI Certified and ETL Listed for verified performance and safety compliance.
-
Installation configurations: GM9S80 for upflow, horizontal left or right; GC9S80 for downflow, horizontal left or right.
-
Convenient left or right connections for gas and electrical service simplify setup.
-
Heavy-gauge steel cabinet with durable baked-enamel finish ensures longevity and protection.
-
Foil-faced insulated heat exchanger enhances energy efficiency and reduces heat loss.
Goodman 2 - 3 Ton R32 Evaporator Coil Upflow/Downflow Cased with Built-in TXV CAPTA3626C3
The Goodman CAPTA3626C3 Evaporator Coil is a high-performance, all-aluminum unit designed for R-32 refrigerant. With integrated thermal expansion valves, it efficiently supports both cooling and heat pump applications. Its flexible installation options allow for upflow or downflow configurations, while a compact 21-inch depth ensures easy access in tight spaces like attics. Featuring foil-faced insulation to minimize condensation, the coil also includes a rust-resistant, UV-resistant drain pan with extra drainage connections. The durable galvanized finish and easy-to-remove drain pan rails enhance maintenance convenience. AHRI certified and ETL listed, this evaporator coil promises exceptional efficiency and long-lasting performance.
- Refrigerant Type: R-32
- Unit Height: 26 in
- Unit Width: 21 in
- Cased/Uncased: Cased
- Tonnage: 3.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
Product Features For Goodman CAPTA3626C3 Vertical Evaporator Coil
-
High-Performance All-Aluminum Design: Engineered for durability and efficiency with R-32 refrigerant compatibility.
-
Integrated Thermal Expansion Valves: Factory-installed for optimal performance in both cooling and heat pump applications.
-
Flexible Installation Options: Suitable for vertical and horizontal configurations to fit various HVAC setups.
-
Compact 21-Inch Depth: Facilitates easy access in tight spaces, such as attics, for convenient installation and maintenance.
-
Foil-Faced Insulation: Reduces condensation, improving overall efficiency and performance.
-
Rust-Resistant, UV-Resistant Drain Pan: Durable design with low water retention and additional drainage connections for reliability.
-
Galvanized Finish: Leather grain-embossed for enhanced longevity and aesthetic appeal.
-
Easy-to-Remove Drain Pan Rails: Simplifies maintenance and coil repositioning for hassle-free service.
-
AHRI Certified and ETL Listed: Ensures safety, efficiency, and compliance with industry standards.
-
Optimized for R-32 Refrigerant: Designed with circuits and manifolds specifically for R-32, enhancing eco-friendliness.
-
Standardized Copper Suction Tube Stub Length: Simplifies installation and compatibility with existing systems.
-
Single Front Access Panel: Provides easy access for maintenance and inspection on CAPTA and CHPTA models.
Upgrade to the Goodman CAPTA3626C3 Evaporator Coil for a reliable, efficient HVAC solution tailored to modern needs!
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
