Goodman 3 Ton R32 Split Heat Pump Condenser 14.3 SEER2 36,000 BTU GLZS4BA3610
This high-efficiency system features a Smart-Shift compressor for quiet defrosting and enhanced aluminum fin coils for optimal performance. It includes a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and a high-capacity muffler. With high- and low-pressure switches and easy access service valves, it’s fully charged for 15 feet of tubing. The cabinet, made from heavy-gauge galvanized steel, has a removable grille-style top, steel louver coil guard, and a durable Architectural Gray powder-coat finish, meeting 2023 Florida Building Code requirements for hurricane winds.
- Heating Capacity Nominal: 36000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 15
- Unit Height: 35.75 in
- Unit Width: 35.5 in
- Max Overcurrent Protection: 35 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 208 lb
- Model Efficiency: 15.2 SEER2
- Unit Depth: 35.5 in
Product Features For Goodman 3 Ton R32 Split Heat Pump GLZS4BA3610
-
High-efficiency compressor for optimal cooling performance
-
SmartShift® technology ensures quiet, reliable defrost cycles
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5 to 3.5-ton units and 7 mm diameter copper tubes for 4.0 to 5.0-ton units
-
Single-speed PSC condenser fan motor for consistent airflow
-
Factory-installed components: bi-flow liquid-line filter drier, suction-line accumulator, compressor crankcase heater, high-capacity muffler
-
High- and low-pressure switches for added safety
-
Service valves with sweat connections for easy access to gauge ports
-
Fully charged for 15’ of tubing length
-
Fully enclosed contactor with lug connection and ground lug connection
-
Extended-life capacitors for durability
-
AHRI Certified and ETL Listed
-
Removable grille-style top compliant with UL 60335-2-40
-
Steel louver coil guard for protection
-
Heavy-gauge galvanized-steel cabinet with an Architectural Gray powder-paint finish (500-hour salt-spray approval)
-
Top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code unit integrity requirements for hurricane-type winds (anchor bracket kits available)
Goodman 80% AFUE Gas Furnace Multi Speed Two Stage Upflow/Horizontal 80,000 BTU GM9C800804CN
The two-stage gas valve provides quiet and economical heating, complemented by an efficient multi-speed ECM circulator motor for optimal performance. The SureStart Silicon Nitride igniter is designed for long igniter life, ensuring reliable operation. A self-diagnostic control board simplifies troubleshooting, while the low constant fan speed circulates air effectively throughout the home. The quiet two-speed induced draft blower enhances airflow, promoting comfort. This system features a fully insulated, heavy-gauge steel cabinet with a durable baked-enamel finish for added durability. It also offers multi-position installation options, making it versatile for various setups.
- Unit Height: 33.375 in
- Unit Width: 21 in
- AFUE: 80 %
- 80,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 129 lb
- Unit Depth: 28 in
-
High reliability and quality for dependable performance
-
Durable igniter designed for long life
-
Provisions for electronic air cleaner and humidifier integration
-
Quiet and economical heating for energy savings
-
Energy-efficient circulation for optimal airflow
-
Self-diagnostic control board with constant memory for easy troubleshooting
-
Operates on two-stage or single-stage thermostats for flexibility
-
Easy connection for EAC and humidifier for convenient setup
Product Features For Goodman 80% AFUE Gas Furnace GM9C800804CN
-
Two-stage gas valve for quiet and economical heating
-
Efficient multi-speed ECM circulator motor for reduced noise
-
SureStart® Silicon Nitride igniter for extended igniter life
-
Self-diagnostic control board for easy troubleshooting
-
Low constant fan speed circulates air efficiently throughout the home
-
Quiet two-speed induced draft blower for optimal airflow
-
California Low NOx emissions-compliant models available
- Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) after October 1, 2019
-
AHRI Certified and ETL Listed for reliability and performance
Cabinet Features
-
Fully insulated heavy-gauge steel cabinet with baked-enamel finish for durability
-
Multi-position installation options: GM9C80 (upflow, horizontal left or right) and GC9C80 (downflow, horizontal left or right)
-
Removable bottom for side- or bottom-return applications
-
Convenient left or right connection for gas/electric service
-
Cabinet air leakage ≤ 2% for energy efficiency
-
Coil and furnace fit flush for most installations
Goodman 2 - 3 Ton R32 Evaporator Coil Upflow/Downflow Cased with Built-in TXV CAPTA3626C3
The Goodman CAPTA3626C3 Evaporator Coil is a high-performance, all-aluminum unit designed for R-32 refrigerant. With integrated thermal expansion valves, it efficiently supports both cooling and heat pump applications. Its flexible installation options allow for upflow or downflow configurations, while a compact 21-inch depth ensures easy access in tight spaces like attics. Featuring foil-faced insulation to minimize condensation, the coil also includes a rust-resistant, UV-resistant drain pan with extra drainage connections. The durable galvanized finish and easy-to-remove drain pan rails enhance maintenance convenience. AHRI certified and ETL listed, this evaporator coil promises exceptional efficiency and long-lasting performance.
- Refrigerant Type: R-32
- Unit Height: 26 in
- Unit Width: 21 in
- Cased/Uncased: Cased
- Tonnage: 3.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
Product Features For Goodman CAPTA3626C3 Vertical Evaporator Coil
-
High-Performance All-Aluminum Design: Engineered for durability and efficiency with R-32 refrigerant compatibility.
-
Integrated Thermal Expansion Valves: Factory-installed for optimal performance in both cooling and heat pump applications.
-
Flexible Installation Options: Suitable for vertical and horizontal configurations to fit various HVAC setups.
-
Compact 21-Inch Depth: Facilitates easy access in tight spaces, such as attics, for convenient installation and maintenance.
-
Foil-Faced Insulation: Reduces condensation, improving overall efficiency and performance.
-
Rust-Resistant, UV-Resistant Drain Pan: Durable design with low water retention and additional drainage connections for reliability.
-
Galvanized Finish: Leather grain-embossed for enhanced longevity and aesthetic appeal.
-
Easy-to-Remove Drain Pan Rails: Simplifies maintenance and coil repositioning for hassle-free service.
-
AHRI Certified and ETL Listed: Ensures safety, efficiency, and compliance with industry standards.
-
Optimized for R-32 Refrigerant: Designed with circuits and manifolds specifically for R-32, enhancing eco-friendliness.
-
Standardized Copper Suction Tube Stub Length: Simplifies installation and compatibility with existing systems.
-
Single Front Access Panel: Provides easy access for maintenance and inspection on CAPTA and CHPTA models.
Upgrade to the Goodman CAPTA3626C3 Evaporator Coil for a reliable, efficient HVAC solution tailored to modern needs!
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
