Goodman 3 Ton R32 Split Heat Pump Condenser 14.3 SEER2 36000 BTU GLZS4BA3610
This high-efficiency system features a Smart-Shift compressor for quiet defrosting and enhanced aluminum fin coils for optimal performance. It includes a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and a high-capacity muffler. With high- and low-pressure switches and easy access service valves, it’s fully charged for 15 feet of tubing. The cabinet, made from heavy-gauge galvanized steel, has a removable grille-style top, steel louver coil guard, and a durable Architectural Gray powder-coat finish, meeting 2023 Florida Building Code requirements for hurricane winds.
- Heating Capacity Nominal: 36000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 15
- Unit Height: 35.75 in
- Unit Width: 35.5 in
- Max Overcurrent Protection: 35 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 208 lb
- Model Efficiency: 15.2 SEER2
- Unit Depth: 35.5 in
Product Features For Goodman 3 Ton R32 Split Heat Pump GLZS4BA3610
-
High-efficiency compressor for optimal cooling performance
-
SmartShift® technology ensures quiet, reliable defrost cycles
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5 to 3.5-ton units and 7 mm diameter copper tubes for 4.0 to 5.0-ton units
-
Single-speed PSC condenser fan motor for consistent airflow
-
Factory-installed components: bi-flow liquid-line filter drier, suction-line accumulator, compressor crankcase heater, high-capacity muffler
-
High- and low-pressure switches for added safety
-
Service valves with sweat connections for easy access to gauge ports
-
Fully charged for 15’ of tubing length
-
Fully enclosed contactor with lug connection and ground lug connection
-
Extended-life capacitors for durability
-
AHRI Certified and ETL Listed
-
Removable grille-style top compliant with UL 60335-2-40
-
Steel louver coil guard for protection
-
Heavy-gauge galvanized-steel cabinet with an Architectural Gray powder-paint finish (500-hour salt-spray approval)
-
Top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code unit integrity requirements for hurricane-type winds (anchor bracket kits available)
Goodman 80% AFUE Gas Furnace Multi Speed ECM Upflow/Horizontal 80000 BTU GM9S800804CN
The Goodman 80% AFUE Gas Furnace (Model: GM9S800804CN) delivers reliable heating with an 80% AFUE rating. Designed for upflow or horizontal configurations, it features a durable aluminized-steel dual-diameter heat exchanger and a single-stage gas valve. The multi-speed ECM blower motor ensures quiet airflow, while the hot-surface igniter and self-diagnostic control board simplify maintenance. This AHRI Certified and ETL Listed furnace includes provisions for an electronic air cleaner and humidifier, and its heavy-gauge steel cabinet features a baked-enamel finish and a foil-faced insulated heat exchanger for improved efficiency.
- Unit Height: 33-3/8 in
- Unit Width: 21 in
- AFUE: 80 %
- 80,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 132 lb
- Model Efficiency: 0.8
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
-
High reliability and quality
-
Durable and long-igniter life
- Provisions for electronic air cleaner and humidifier
-
Energy efficient and quiet circulation
-
Self-diagnostic control board with constant memory
-
Simple installation and setup
-
Quiet and simple operation
Product Features For Goodman 80% Efficiency Gas Furnace GM9S800804CN
-
Heavy-duty aluminized-steel dual-diameter tubular heat exchanger for enhanced durability
-
Single-stage gas valve ensures reliable operation
-
Durable hot-surface igniter for consistent performance
-
Quiet, single-speed draft induced system for efficient airflow
-
Self-diagnostic control board for easy troubleshooting
-
Color-coded low-voltage terminals simplify wiring connections
-
Multi-speed ECM blower motor for optimized airflow and efficiency
-
California Low NOx emissions models available for eco-friendly operation
- Installation prohibited in California’s South Coast Air Quality Management District (SCAQMD) as of October 1, 2019
-
AHRI Certified and ETL Listed for reliability and safety
-
Installation options: GM9S80 - upflow, horizontal left or right; GC9S80 - downflow, horizontal left or right
- Convenient left or right connection for gas and electrical service
-
Heavy-gauge steel cabinet with a durable baked-enamel finish for added protection
-
Foil-faced insulated heat exchanger for improved energy efficiency
Goodman 2 - 3 Ton R32 Evaporator Coil Upflow/Downflow Cased with Built-in TXV CAPTA3626C3
The Goodman CAPTA3626C3 Evaporator Coil is a high-performance, all-aluminum unit designed for R-32 refrigerant. With integrated thermal expansion valves, it efficiently supports both cooling and heat pump applications. Its flexible installation options allow for upflow or downflow configurations, while a compact 21-inch depth ensures easy access in tight spaces like attics. Featuring foil-faced insulation to minimize condensation, the coil also includes a rust-resistant, UV-resistant drain pan with extra drainage connections. The durable galvanized finish and easy-to-remove drain pan rails enhance maintenance convenience. AHRI certified and ETL listed, this evaporator coil promises exceptional efficiency and long-lasting performance.
- Refrigerant Type: R-32
- Unit Height: 26 in
- Unit Width: 21 in
- Cased/Uncased: Cased
- Tonnage: 3.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
Product Features For Goodman CAPTA3626C3 Vertical Evaporator Coil
-
High-Performance All-Aluminum Design: Engineered for durability and efficiency with R-32 refrigerant compatibility.
-
Integrated Thermal Expansion Valves: Factory-installed for optimal performance in both cooling and heat pump applications.
-
Flexible Installation Options: Suitable for vertical and horizontal configurations to fit various HVAC setups.
-
Compact 21-Inch Depth: Facilitates easy access in tight spaces, such as attics, for convenient installation and maintenance.
-
Foil-Faced Insulation: Reduces condensation, improving overall efficiency and performance.
-
Rust-Resistant, UV-Resistant Drain Pan: Durable design with low water retention and additional drainage connections for reliability.
-
Galvanized Finish: Leather grain-embossed for enhanced longevity and aesthetic appeal.
-
Easy-to-Remove Drain Pan Rails: Simplifies maintenance and coil repositioning for hassle-free service.
-
AHRI Certified and ETL Listed: Ensures safety, efficiency, and compliance with industry standards.
-
Optimized for R-32 Refrigerant: Designed with circuits and manifolds specifically for R-32, enhancing eco-friendliness.
-
Standardized Copper Suction Tube Stub Length: Simplifies installation and compatibility with existing systems.
-
Single Front Access Panel: Provides easy access for maintenance and inspection on CAPTA and CHPTA models.
Upgrade to the Goodman CAPTA3626C3 Evaporator Coil for a reliable, efficient HVAC solution tailored to modern needs!
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
