Goodman 2.5 Ton 14.3 SEER2 Air Conditioner Condenser Single Stage R32 GLXS4BA3010-MH
The Goodman GLXS4BA3010-MH is a 2.5 ton, 14.3 SEER2 air conditioner condenser built for mobile and manufactured home installations. It uses a rotary compressor and the lower-GWP R32 refrigerant, and ships factory-charged for a 15-foot line set to simplify installation.
Rated at 30,000 BTU of cooling with a durable galvanized steel cabinet, this AC-only condenser runs quietly at 71 dBA and is a cost-effective option for mobile home systems paired with a separate furnace or air handler.
Key Features and Benefits:
-
14.3 SEER2 Efficiency
Provides dependable, energy-conscious cooling performance.
-
Factory-Charged R32 Refrigerant
Pre-charged for a 15-foot line set for quick, accurate installation.
-
Rotary Compressor
Delivers steady, reliable single-stage cooling.
-
Factory-Installed Filter Drier
Reduces moisture and contaminants for longer system life.
-
Low Sound Operation
Runs as low as 71 dBA thanks to dampening features in the cabinet design.
-
Durable Galvanized Steel Cabinet
Built to withstand outdoor exposure in mobile home installations.
Installation Requirements
This condenser must be paired with a compatible R32 mobile home evaporator coil and furnace or air handler cabinet; it cannot heat or operate as a standalone unit. Disclaimer: This condenser contains R32 refrigerant, which is classified as an A2L refrigerant. To comply with safety standards, this unit must be paired with an R32 air handler or evaporator coil equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-557-9206 if you have any questions.
ACiQ 3 Ton Uncased Downflow Mobile Home Coil With TXV R32 ACiQ-MH36BU3VYEC
The ACiQ ACiQ-MH36BU3VYEC is an uncased downflow evaporator coil built specifically for mobile and manufactured home split-system installations. It uses left-hand refrigerant and plumbing connections with sweat/braze fittings, and a factory-installed TXV for accurate refrigerant metering.
Constructed with rifled aluminum tubing, enhanced aluminum fins, and a heavy-duty polypropylene drain pan, this 3 ton coil is AHRI certifiable with any brand of compatible condenser and includes a downflow plate kit for straightforward field installation.
Key Features and Benefits:
-
3 Ton Downflow Coil
Sized for mobile and manufactured home split systems.
-
R32 Refrigerant Compatible
Built for use with modern R32 split systems.
-
Factory-Installed TXV
Ensures precise refrigerant metering for improved efficiency.
-
Rifled Aluminum Tubing
Enhanced aluminum fins promote efficient heat transfer.
-
Left-Hand Connections
Sweat/braze fittings simplify field installation.
-
Heavy-Duty Polypropylene Drain Pan
Resists corrosion for long-term reliability.
-
Downflow Plate Kit Included
Built specifically for mobile and manufactured home use.
Installation Requirements
This coil is designed for mobile and manufactured home applications only and must be matched with a compatible condenser and mobile home furnace or air handler cabinet; it cannot operate as a standalone unit. Disclaimer: This coil is intended for use with R32 refrigerant systems, which are classified as A2L. To comply with safety standards, ensure the paired condenser and system include proper leak detection where required. Please call us at 1-888-557-9206 if you have any questions.
ACiQ 32,800 BTU Mobile Home Electric Furnace Downflow 10KW R454B & R32 ACIQ-EFS1020FD-MH
The ACiQ-EFS1020FD-MH is a 10 kilowatt electric downflow furnace rated at 32,800 BTU, built specifically for mobile and manufactured home heating applications. An ECM multi-speed blower moves up to 1,760 CFM through the direct-drive 3/4 HP motor, and factory-installed sequencers with temperature limit switches keep operation safe and efficient on a 240V single-phase circuit.
Field technicians will appreciate the front-accessible controls and a disconnect that doesn't protrude through the wall panel, both of which make routine service quicker. The washable/replaceable filter keeps ongoing maintenance costs low, and heat modules can be added or serviced in the field using molex plug connections or ordered pre-installed from the factory.
Key Features
-
10kW / 32,800 BTU Output - Delivers reliable electric resistance heat sized for mobile and manufactured home applications.
-
ECM Multi-Speed Blower - Direct-drive 3/4 HP ECM motor moves up to 1,760 CFM for even heat distribution.
-
Safety Sequencers & Limit Switches - Factory-installed controls stage heating elements safely and protect against overheating.
-
Molex Plug Modules - Heat modules install or service in the field via molex connections, or ship factory-installed.
-
Front-Access Controls - Service points are accessible from the front of the cabinet for faster maintenance.
-
Flush-Mounted Disconnect - The electrical disconnect does not protrude through the wall panel, keeping installs tidy.
-
Washable Filter - Easy-to-clean or replace filter helps lower long-term maintenance costs.
-
240V Single-Phase Electrical - Runs on a standard 240V 1-phase circuit with a 60 amp max breaker.
View More Air Conditioner & Furnace Systems
