The Goodman 1.5 Ton R32 Split Heat Pump is designed for efficient heating and cooling with its 14.5 SEER2 rating, making it ideal for residential or light commercial applications. With a single-stage, rotary compressor, this 208/240V, 1-phase unit delivers 18,000 Btu/H of heating power. Its SmartShift® technology ensures quiet defrost cycles, while high- and low-pressure switches provide enhanced system protection. Built to last, this unit features a durable galvanized-steel cabinet with a sleek gray powder-coated finish and steel louver coil guard. The compressor crankcase heater, bi-flow filter drier, and suction-line accumulator further improve efficiency and reliability.
- Heating Capacity Nominal: 18,000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Model Efficiency: 14.5 SEER2
- Unit Depth: 29 in
Product Features For Goodman 14.5 SEER2 Split System Heat Pump
-
High-efficiency compressor for optimal energy use and performance
-
SmartShift® technology ensures quiet, reliable defrost cycles
-
Enhanced aluminum fin coil with 5 mm diameter on 1.5 to 3.5-ton units
-
Enhanced aluminum fin coil with 7 mm copper tubing on 4.0 to 5.0-ton units
-
Single-speed PSC condenser fan motor for dependable operation
-
Factory-installed bi-flow liquid-line filter drier to maintain efficiency
-
Factory-installed suction-line accumulator for safe refrigerant control
-
Compressor crankcase heater included to prevent cold start issues
-
High-capacity muffler for reduced noise levels
-
High- and low-pressure switches for added system protection
-
Service valves with sweat connections and accessible gauge ports
-
Fully charged for up to 15 feet of tubing length
-
Fully enclosed contactor with lug connection for secure wiring
-
Ground lug connection for improved safety and reliability
-
Extended-life capacitors for longevity and efficiency
-
AHRI Certified and ETL Listed for quality assurance
-
Removable grille-style top that meets UL 60335-2-40 standards
-
Steel louver coil guard for enhanced coil protection
-
Heavy-gauge galvanized-steel cabinet for long-lasting durability
-
Architectural Gray powder-paint finish with 500-hour salt-spray resistance
-
Top and side maintenance access for ease of service
- Compliant with 2023 Florida Building Code for hurricane-type winds when properly anchored (optional anchor bracket kits available)
Goodman Gas Furnace 96% AFUE 60,000 BTU Upflow/Horizontal Two-Stage Multi-Speed ECM GM9C960603BN
The GM9C960603BN Goodman gas furnace stands out as a high-efficiency solution, packed with money-saving features. This two-stage, 9-speed furnace boasts a superior heat exchanger, ensuring optimal heat transfer to your home. Recognized for its top-tier efficiency, the GMC960603BN is a smart choice for those seeking to reduce their gas bills.
- Unit Height: 33.375 in
- Unit Width: 17.5 in
- AFUE: 96 %
- Heating Capacity 60,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 1105 lb
- Unit Depth: 28 in
Product Features For Goodman Gas Furnace 96% AFUE 60,000 BTU
-
Energy-Efficient Multi-Speed ECM Blower Motor: Optimizes energy usage and airflow for efficient heating.
-
Heavy-Duty Aluminized-Steel Tubular Heat Exchanger: Ensures durability and reliable heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Provides additional durability and enhanced efficiency.
-
Two-Stage Gas Valve: Delivers quiet and economical heating.
-
Durable Silicon Nitride Igniter: Offers long-lasting, reliable ignition.
-
Quiet Two-Speed Induced Draft Blower: Ensures safe and quiet venting operation.
-
Self-Diagnostic Control Board: Features memory fault code history with LED display for easy troubleshooting.
-
Color-Coded Low-Voltage Terminals: Equipped with provisions for electronic air cleaner and humidifier.
-
Low Continuous Fan Speed Options: Quiet air circulation for enhanced comfort.
-
California Low NOx Compliant: Meets the 40 ng/J low NOx emissions standard for eco-friendly operation.
-
Installation Restriction in SCAQMD: No installation allowed in California's South Coast Air Quality Management District after October 1, 2019.
-
AHRI Certified & ETL Listed: Certified for performance and safety.
-
Multi-Position Installation: Suitable for upflow or horizontal left/right applications.
-
Direct Vent or Non-Direct Vent Options: Flexible venting configurations (2-pipe or 1-pipe).
-
Easy Top Venting with Optional Side Venting: Simplifies installation.
-
Convenient Gas & Electrical Connections: Left or right connection options for installation flexibility.
-
Low Cabinet Air Leakage: ≤ 2% air leakage for optimal efficiency.
-
Heavy-Gauge Steel Cabinet: Features a durable finish for longevity.
-
Fully Insulated Heat Exchanger and Blower Section: Minimizes heat loss and noise.
-
Airtight Solid Bottom or Side Return: Easy-cut tabs for simple removal in bottom air-inlet applications.
Goodman 2 Ton R32 Horizontal Evaporator Coil 26"W x 17.5"H CHPTA2426B3
This high-performance evaporator coil is designed for R-32 refrigerant and includes integrated thermal expansion valves for cooling and heat pump applications. It offers flexible installation with both vertical and horizontal models and a 21-inch depth for easy attic access. Equipped with foil-faced insulation to reduce condensation, it features a rust-resistant, UV-resistant drain pan with extra drainage connections. Its durable galvanized finish and removable drain pan rails enhance longevity and maintenance. Certified by AHRI and ETL listed, this coil provides efficiency, durability, and ease of use for a reliable HVAC solution.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
- R-32 refrigerant optimized coil
- R-32 sensor lifespan
- Thermal expansion valves
- Copper suction tube stub
- Check Flowrator design
- Horizontal installation evaporator
- Compact attic access coil
- Foil-faced insulation benefits
- Durable galvanized finish
- Rust-resistant drain pan
- Secondary drain connections
- UV-resistant coil design
- AHRI certified efficiency
Product Features For R32 Horizontal Evaporator Coil
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds designed for efficiency.
-
R-32 Sensor: Enhances the coil's lifespan.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications.
-
Standardized Copper Suction Tube Stub: Ensures compatibility and ease of installation.
-
Check Flowrator: Designed for cooling and heat pump systems.
-
Horizontal Application: Specifically designed for horizontal installation.
-
Compact Depth: 21" depth for easier attic access.
-
Single Front Access Panel: Facilitates maintenance and service.
-
Foil-Faced Insulation: Reduces cabinet condensation.
-
Durable Finish: Galvanized leather grain-embossed finish for longevity.
-
Rust-Resistant Drain Pan: Low water-retention design with DecaBDE-free thermoplastic.
-
Secondary Drain Connections: For added drainage flexibility.
-
Easy Removal: Drain pan rails allow for quick repositioning of coils.
-
UV-Resistant: Designed for long-lasting performance.
-
AHRI Certified: Ensures compliance with industry standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
View More Heat Pump & Furnace Systems
