Goodman 2.5 Ton R32 Split Heat Pump Condenser 14.3 SEER2 30,000 BTU GLZS4BA3010
The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting. It includes enhanced aluminum fin coils. Additional components include a single-speed PSC fan motor, factory-installed bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. It also has high- and low-pressure switches, service valves with easy access ports, is fully charged for 15 feet of tubing, and includes a fully enclosed contactor with a lug connection. The unit is AHRI Certified and ETL Listed.
- Heating Capacity Nominal: 30000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 39.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 174 lb
- Unit Depth: 29 in
Product Features For Goodman Heat Pump Condenser GLZS4BA3010
-
High-efficiency compressor – Ensures optimal performance and energy savings.
-
SmartShift® technology for quiet, reliable defrost – Reduces noise during defrost cycles.
-
Enhanced aluminum fin coil (5 mm for 1.5T-3.5 Ton) – Improves heat transfer efficiency in smaller models.
-
Enhanced aluminum fin coil (7 mm copper tubes for 4.0-5.0 Ton) – Enhances durability and performance in larger models.
-
Single-speed PSC condenser fan motor – Provides consistent airflow and cooling performance.
-
Factory-installed bi-flow liquid-line filter drier – Protects the system by removing moisture and debris.
-
Factory-installed suction-line accumulator – Prevents liquid refrigerant from damaging the compressor.
-
Factory-installed compressor crankcase heater – Protects the compressor in colder temperatures.
-
Factory-installed high-capacity muffler – Reduces noise and ensures smoother operation.
-
High- and low-pressure switches – Monitors system pressure for safe and efficient operation.
-
Service valves with sweat connections and easy gauge access – Simplifies maintenance and service access.
-
Fully charged for 15’ of tubing – Ready for easy installation with no additional refrigerant needed.
-
Fully enclosed contactor with lug connection – Protects electrical components and ensures secure connections.
-
Ground lug connection – Ensures proper grounding for electrical safety.
-
Capacitors with extended life – Increases reliability and reduces the need for frequent replacements.
-
AHRI Certified; ETL Listed – Meets industry standards for performance and safety.
-
Removable grille-style top design compliant with UL 60335-2-40 – Easy access for maintenance and compliant with safety standards.
-
Steel louver coil guard – Protects the coil from damage and debris.
-
Heavy-gauge galvanized-steel cabinet – Durable construction for long-lasting protection.
-
Architectural Gray powder-paint finish with 500-hour salt-spray approval – Corrosion-resistant finish for harsh environments.
-
Top and side maintenance access – Simplifies service and reduces maintenance time.
-
Meets 2023 Florida Building Code for hurricane-type winds when anchored – Designed to withstand severe weather conditions (Anchor bracket kits available).
Goodman Gas Furnace Upflow/Horizontal 80% AFUE 100,000 BTU Single Stage GM9S801005CN
The Goodman 5 Ton Gas Furnace GM9S801005CN is a powerful and versatile heating solution, delivering 100,000 BTU of warmth for your home. Designed for upflow or horizontal installation, this multi-speed furnace ensures consistent comfort throughout your space. Its single-stage operation optimizes efficiency, making it an ideal choice for energy-conscious homeowners. Built with durable materials and advanced engineering, this furnace promises reliability and longevity. Enjoy cozy winters with the trusted performance of Goodman, designed to keep your home warm and inviting.
- Unit Height: 33.375 in
- Unit Width: 21 in
- AFUE: 80 %
- 100,000 BTU Input
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Nine Speed ECM
- Unit Weight: 132 lb
- Unit Depth: 28 in
- High reliability and quality
- Durable and long-igniter life
- Provisions for electronic air cleaner and humidifier
-
Energy efficient and quiet circulation
-
Self-diagnostic control board with constant memory
- Simple installation and setup
-
Quiet and simple operation
Product Features For Goodman 80% AFUE 100,000 BTU Gas Furnace
-
Heavy-duty aluminized-steel dual-diameter tubular heat exchanger for enhanced durability and heat transfer.
-
Single-stage gas valve provides reliable performance and efficient operation.
-
Durable hot-surface igniter ensures consistent ignition and long-lasting service life.
-
Quiet, single-speed draft induced blower minimizes noise while maximizing airflow.
-
Self-diagnostic control board simplifies troubleshooting with constant memory capabilities.
-
Color-coded low-voltage terminals for easy wiring and installation.
-
Multi-speed ECM blower motor optimizes airflow and efficiency based on demand.
-
California Low NOx emissions models available to meet environmental regulations.
-
Installation restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
-
AHRI Certified and ETL Listed for verified performance and safety compliance.
-
Installation configurations: GM9S80 for upflow, horizontal left or right; GC9S80 for downflow, horizontal left or right.
-
Convenient left or right connections for gas and electrical service simplify setup.
-
Heavy-gauge steel cabinet with durable baked-enamel finish ensures longevity and protection.
-
Foil-faced insulated heat exchanger enhances energy efficiency and reduces heat loss.
Goodman 2 - 3 Ton R32 Evaporator Coil Upflow/Downflow Cased with Built-in TXV CAPTA3626C3
The Goodman CAPTA3626C3 Evaporator Coil is a high-performance, all-aluminum unit designed for R-32 refrigerant. With integrated thermal expansion valves, it efficiently supports both cooling and heat pump applications. Its flexible installation options allow for upflow or downflow configurations, while a compact 21-inch depth ensures easy access in tight spaces like attics. Featuring foil-faced insulation to minimize condensation, the coil also includes a rust-resistant, UV-resistant drain pan with extra drainage connections. The durable galvanized finish and easy-to-remove drain pan rails enhance maintenance convenience. AHRI certified and ETL listed, this evaporator coil promises exceptional efficiency and long-lasting performance.
- Refrigerant Type: R-32
- Unit Height: 26 in
- Unit Width: 21 in
- Cased/Uncased: Cased
- Tonnage: 3.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
Product Features For Goodman CAPTA3626C3 Vertical Evaporator Coil
-
High-Performance All-Aluminum Design: Engineered for durability and efficiency with R-32 refrigerant compatibility.
-
Integrated Thermal Expansion Valves: Factory-installed for optimal performance in both cooling and heat pump applications.
-
Flexible Installation Options: Suitable for vertical and horizontal configurations to fit various HVAC setups.
-
Compact 21-Inch Depth: Facilitates easy access in tight spaces, such as attics, for convenient installation and maintenance.
-
Foil-Faced Insulation: Reduces condensation, improving overall efficiency and performance.
-
Rust-Resistant, UV-Resistant Drain Pan: Durable design with low water retention and additional drainage connections for reliability.
-
Galvanized Finish: Leather grain-embossed for enhanced longevity and aesthetic appeal.
-
Easy-to-Remove Drain Pan Rails: Simplifies maintenance and coil repositioning for hassle-free service.
-
AHRI Certified and ETL Listed: Ensures safety, efficiency, and compliance with industry standards.
-
Optimized for R-32 Refrigerant: Designed with circuits and manifolds specifically for R-32, enhancing eco-friendliness.
-
Standardized Copper Suction Tube Stub Length: Simplifies installation and compatibility with existing systems.
-
Single Front Access Panel: Provides easy access for maintenance and inspection on CAPTA and CHPTA models.
Upgrade to the Goodman CAPTA3626C3 Evaporator Coil for a reliable, efficient HVAC solution tailored to modern needs!
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
