The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 96% AFUE Gas Furnace 80,000 BTU Two-Stage Variable-Speed Upflow/Horizontal GMVC960804CN
Incorporating advanced technology for peak efficiency, a two-stage burner, and a variable-speed blower motor, the GMVC960804CN gas furnace stands as another exceptional creation by Goodman. Enhanced durability and reliability ensure that this Goodman gas furnace maintains high performance over its entire lifespan, resulting in long-term cost savings.
- Energy Star Certified: Yes
- Unit Height: 34.5 in
- Unit Width: 21 in
- Communication Feature Type: ComfortBridge Technology compatible
- AFUE: 96 %
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Variable Speed ECM
- Unit Depth: 29 in
- 96% AFUE Efficiency
- 80,000 BTU
- Two-Stage Variable Speed Furnace
- Durability
- Installation Flexibility
- Versatile Setup
- Reliable Performance
Product Features for Goodman 96% 80,000 BTU Gas Furnace GMVC960804CN
-
ComfortBridge™ Technology: Integrated communicating technology for advanced system performance.
-
Bluetooth Diagnostics: Commissioning and diagnostics through the CoolCloud phone and tablet app.
-
Heavy-Duty Aluminized-Steel Tubular Heat Exchanger: Ensures long-lasting durability and efficient heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Adds enhanced reliability and efficiency.
-
Two-Stage Gas Valve: Delivers quiet, efficient, and economical heating.
-
Durable Silicon Nitride Igniter: Provides long-lasting ignition reliability.
-
Quiet Two-Speed Induced Draft Blower: Optimizes airflow while maintaining low noise levels.
-
Single-Stage Thermostat Compatibility: Works with any single-stage thermostat for added flexibility.
-
Self-Diagnostic Control Board: Monitors system performance with constant memory and fault code history via a triple 7-segment display.
-
Color-Coded Low-Voltage Terminals: Includes provisions for an electronic air cleaner.
-
Variable-Speed Airflow System: Provides quiet, efficient air circulation, ramping up or down based on demand.
-
Multiple Fan Speed Options: Ensures quiet and consistent air circulation.
-
Auto-Comfort and Dehumidification Modes: Enhances comfort and humidity control.
-
California Low NOx Compliance: Meets 40 ng/J Low NOx emission standards for eco-friendly operation.
-
Multi-Position Installation: Designed for upflow, horizontal left, or right installation.
-
Direct Vent Certification: Supports both direct (2-pipe) and non-direct (1-pipe) venting.
-
Easy Top or Side Venting: Simplifies installation with convenient venting options.
-
Left or Right Gas and Electrical Connections: Provides flexible installation options.
-
Cabinet Air Leakage (QLeak) ≤ 2%: Minimizes air leakage for optimal efficiency.
-
Heavy-Gauge Steel Cabinet with Baked-Enamel Finish: Ensures long-term durability and protection.
-
Fully Insulated Heat Exchanger and Blower Section: Reduces heat loss and operational noise.
-
Airtight Solid Bottom or Side-Return Design: Easy-cut tabs allow for effortless removal in bottom air-inlet applications.
The Goodman CHPTA2426C3 R32 Evaporator Coil features a 26" wide cased horizontal-A design, with optimized R-32 compatibility and factory-installed TXV for efficient cooling and heat pump support. This all-aluminum coil includes a durable galvanized cabinet, UV-resistant, DecaBDE-free thermoplastic drain pan with secondary connections, and foil-faced insulation to minimize condensation. Its 21" depth ensures easy attic access, while a single front panel allows for streamlined servicing. AHRI certified and ETL listed, this coil is engineered for efficiency, safety, and longevity in demanding HVAC applications.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal-A Evaporator Coil
-
All-Aluminum evaporator coil: Lightweight and efficient for reliable performance.
-
Optimized for R-32 refrigerant: Includes specialized circuits and manifold, enhancing compatibility and efficiency.
-
R-32 sensor: Designed to last the coil’s full lifespan, ensuring consistent performance.
-
Factory-installed thermal expansion valves: Supports cooling and heat pump applications for optimal performance.
-
Standardized copper suction tube stub length: Simplifies installation and compatibility across systems.
-
Check flowrator: Provides reliable flow control for both cooling and heat pump setups.
-
Horizontal application: Suitable for various installation orientations.
-
21" depth: Allows easier access in tight spaces, such as attics.
-
Single front access panel: Simplifies servicing and maintenance.
-
Foil-faced insulation: Reduces cabinet condensation for improved efficiency.
-
Galvanized, leather grain-embossed finish: Durable and rust-resistant for long-lasting performance.
-
Rust-resistant thermoplastic drain pan: Features a low water-retention design to prevent buildup.
-
DecaBDE-free thermoplastic drain pan: Includes secondary drain connections for added drainage options.
-
Drain pan rails: Enable easy removal and repositioning of coils without compromising structure.
-
UV-resistant drain pan: Protects against sun damage, enhancing durability.
-
AHRI certified and ETL Listed: Compliant with industry standards for quality and safety.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
