The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 80% AFUE Gas Furnace 60,000 BTU Variable Speed Two Stage Upflow/Horizontal GMVC800604BN
The Goodman 80% AFUE Gas Furnace (60,000 BTU) offers variable speed and two-stage operation for upflow/horizontal installations. With an 80% AFUE rating, it features integrated ComfortBridge technology for enhanced communication, a quiet two-stage gas valve for economical heating, and a Bluetooth-enabled CoolCloud app for easy diagnostics. The efficient variable-speed ECM circulator motor adapts to heating and cooling demands, while the SureStart Silicon Nitride igniter ensures reliability. The self-diagnostic control board displays fault codes, and a low constant fan speed improves air circulation and comfort.
- Unit Height: 33.3 in
- Unit Width: 17-1/2 in
- Communication Feature Type: ComfortBridge Technology compatible
- AFUE: 80 %
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Minimum Clearances to Combustible Materials: 1 ft
- Motor Speed Type: Variable Speed ECM
- Unit Weight: 107 lb
- Model Efficiency: 0.8
- Unit Depth: 28 in
- Heat Exchanger Type: Gas
- High reliability and quality
-
Airflow system adjusts for better comfort
- Compatible with non-communicating single-stage thermostats
- Durable igniter with long life
- Quiet and economical heating
-
Multi-position installation: Upflow, horizontal left, or right
- Left or right gas and electrical connections
- Cabinet air leakage (Qleak) ≤ 2%
- Fully insulated heat exchanger and blower
- Bottom or side return air applications
- Heavy-gauge steel cabinet
Product Features For Goodman 80% Efficiency Gas Furnace
- Integrated ComfortBridge™ technology for enhanced communication and performance
- Two-stage gas valve provides quiet, economical heating
- Bluetooth-enabled commissioning and diagnostics through the CoolCloud™ app
- Efficient, quiet variable-speed ECM circulator motor adapts to heating or cooling demands
-
SureStart® Silicon Nitride igniter for long-lasting reliability
-
Self-diagnostic control board with constant memory and fault code display
-
Low constant fan speed circulates air efficiently throughout the home
- Quiet, two-speed induced draft blower enhances comfort
-
California Low NOx emissions-compliant models available
- Installation prohibited in California's South Coast Air Quality Management District (SCAQMD) as of October 1, 2019
-
AHRI Certified and ETL Listed for reliability and safety
Cabinet Features
- Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
- Multi-position installation options: GMVC80 (upflow, horizontal left/right), GCVC80 (downflow, horizontal left/right)
-
Removable bottom for flexible side- or bottom-return applications
- Convenient left or right connections for gas/electric service
- Low cabinet air leakage (≤ 2%) for improved efficiency
- Flush fit for coil and furnace installations
Goodman 2 Ton R32 Horizontal Evaporator Coil 26"W x 17.5"H CHPTA2426B3
This high-performance evaporator coil is designed for R-32 refrigerant and includes integrated thermal expansion valves for cooling and heat pump applications. It offers flexible installation with both vertical and horizontal models and a 21-inch depth for easy attic access. Equipped with foil-faced insulation to reduce condensation, it features a rust-resistant, UV-resistant drain pan with extra drainage connections. Its durable galvanized finish and removable drain pan rails enhance longevity and maintenance. Certified by AHRI and ETL listed, this coil provides efficiency, durability, and ease of use for a reliable HVAC solution.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
- R-32 refrigerant optimized coil
- R-32 sensor lifespan
- Thermal expansion valves
- Copper suction tube stub
- Check Flowrator design
- Horizontal installation evaporator
- Compact attic access coil
- Foil-faced insulation benefits
- Durable galvanized finish
- Rust-resistant drain pan
- Secondary drain connections
- UV-resistant coil design
- AHRI certified efficiency
Product Features For R32 Horizontal Evaporator Coil
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds designed for efficiency.
-
R-32 Sensor: Enhances the coil's lifespan.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications.
-
Standardized Copper Suction Tube Stub: Ensures compatibility and ease of installation.
-
Check Flowrator: Designed for cooling and heat pump systems.
-
Horizontal Application: Specifically designed for horizontal installation.
-
Compact Depth: 21" depth for easier attic access.
-
Single Front Access Panel: Facilitates maintenance and service.
-
Foil-Faced Insulation: Reduces cabinet condensation.
-
Durable Finish: Galvanized leather grain-embossed finish for longevity.
-
Rust-Resistant Drain Pan: Low water-retention design with DecaBDE-free thermoplastic.
-
Secondary Drain Connections: For added drainage flexibility.
-
Easy Removal: Drain pan rails allow for quick repositioning of coils.
-
UV-Resistant: Designed for long-lasting performance.
-
AHRI Certified: Ensures compliance with industry standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
