The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 80% AFUE Gas Furnace 80,000 BTU Multi Speed ECM Two Stage Upflow/Horizontal Low NOx GM9C800804BX
The Goodman 80% AFUE Gas Furnace, 80,000 BTU, provides efficient two-stage heating and multi-speed ECM operation in an upflow/horizontal setup (GM9C800804BX). This Low NOx model includes a durable, quiet two-stage gas valve for enhanced comfort, SureStart® Silicon Nitride igniter for reliability, and an ECM motor that optimizes energy use. The self-diagnostic control board, quiet two-speed induced draft blower, and support for air cleaners and humidifiers add value. California Low NOx compliant models are available, and AHRI and ETL certifications ensure safety and efficiency.
- NOx Burner Type: Low NOx
- Unit Height: 33-3/8 in
- Unit Width: 17-1/2 in
- AFUE: 80 %
- Cooling Capacity Nominal: 48000 Btu/H
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 121 lb
- Model Efficiency: 0.8
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
- High reliability and quality
- Durable, long-lasting igniter
- Supports electronic air cleaner and humidifier
- Quiet, economical heating
- Energy-efficient, quiet circulation
- Self-diagnostic control board with constant memory
- Compatible with two-stage or single-stage thermostats
- Easy connection for EAC and humidifier
Product Features For Goodman 80% Efficiency Low NOx Gas Furnace
-
Two-stage gas valve: Provides quiet and economical heating for enhanced comfort
-
Efficient multi-speed ECM circulator motor: Ensures quiet operation and optimal energy efficiency
-
SureStart® Silicon Nitride igniter: Built for extended igniter life and reliable starts
-
Self-diagnostic control board: Offers easy troubleshooting and maintenance
-
Low constant fan speed: Maintains consistent, quiet air circulation throughout the home
-
Quiet, two-speed induced draft blower: Reduces noise while maintaining smooth airflow
-
California Low NOx emissions models available: Meets state emissions standards for cleaner operation
-
Installation restriction: Cannot be installed in California’s SCAQMD region after October 1, 2019
-
AHRI Certified; ETL Listed: Verified for efficiency and safety
Cabinet Features
-
Fully insulated, heavy-gauge steel cabinet: Durable baked-enamel finish for longevity
-
Multi-position installation:
-
GM9C80: Upflow, horizontal left or right
-
GC9C80: Downflow, horizontal left or right
-
Removable bottom panel: Suitable for side- or bottom-return applications
-
Convenient left or right connections for gas and electrical service
-
Cabinet air leakage ≤ 2%: Optimized for energy efficiency
-
Flush fit for coil and furnace: Ideal for seamless installations
Goodman 2 Ton R32 Horizontal Evaporator Coil 26"W x 17.5"H CHPTA2426B3
This high-performance evaporator coil is designed for R-32 refrigerant and includes integrated thermal expansion valves for cooling and heat pump applications. It offers flexible installation with both vertical and horizontal models and a 21-inch depth for easy attic access. Equipped with foil-faced insulation to reduce condensation, it features a rust-resistant, UV-resistant drain pan with extra drainage connections. Its durable galvanized finish and removable drain pan rails enhance longevity and maintenance. Certified by AHRI and ETL listed, this coil provides efficiency, durability, and ease of use for a reliable HVAC solution.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
- R-32 refrigerant optimized coil
- R-32 sensor lifespan
- Thermal expansion valves
- Copper suction tube stub
- Check Flowrator design
- Horizontal installation evaporator
- Compact attic access coil
- Foil-faced insulation benefits
- Durable galvanized finish
- Rust-resistant drain pan
- Secondary drain connections
- UV-resistant coil design
- AHRI certified efficiency
Product Features For R32 Horizontal Evaporator Coil
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds designed for efficiency.
-
R-32 Sensor: Enhances the coil's lifespan.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications.
-
Standardized Copper Suction Tube Stub: Ensures compatibility and ease of installation.
-
Check Flowrator: Designed for cooling and heat pump systems.
-
Horizontal Application: Specifically designed for horizontal installation.
-
Compact Depth: 21" depth for easier attic access.
-
Single Front Access Panel: Facilitates maintenance and service.
-
Foil-Faced Insulation: Reduces cabinet condensation.
-
Durable Finish: Galvanized leather grain-embossed finish for longevity.
-
Rust-Resistant Drain Pan: Low water-retention design with DecaBDE-free thermoplastic.
-
Secondary Drain Connections: For added drainage flexibility.
-
Easy Removal: Drain pan rails allow for quick repositioning of coils.
-
UV-Resistant: Designed for long-lasting performance.
-
AHRI Certified: Ensures compliance with industry standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
View More Heat Pump & Furnace Systems
