The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 80% AFUE GM9C80 Gas Furnace Two Stage Upflow/Horizontal 40000 BTU GM9C800403AN
This 80% AFUE gas furnace delivers high reliability and quality heating with its two-stage operation and nine-speed ECM motor. With an output of 40,000 BTU, it features a durable igniter for a long lifespan and provisions for electronic air cleaners and humidifiers. Enjoy quiet and economical heating alongside energy-efficient air circulation. The unit is equipped with a self-diagnostic control board for constant memory, making it compatible with both two-stage and single-stage thermostats. Installation is simplified with easy connection options for EAC and humidifiers.
- Unit Height: 33.375 in
- Unit Width: 14 in
- AFUE: 80 %
- 40,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Nine Speed ECM
- Unit Weight: 105 lb
- Unit Depth: 28 in
- High reliability and quality
- Durable and long igniter life
- Provisions for electronic air cleaner and humidifier
- Quiet and economical heating
- Energy efficient and quiet circulation
- Self-diagnostic control board with constant memory
- Operates on two-stage or single-stage thermostats
- Easy connection for EAC and humidifier
Product Features for Goodman 80% AFUE 40,000 Gas Furnace
-
Two-stage gas valve provides quiet, economical heating
-
Efficient and quiet multi-speed ECM circulator motor
-
SureStart® Silicon Nitride igniter designed for long igniter life
- Self-diagnostic control board
-
Low constant fan speed circulates air throughout the home
-
Quiet, two-speed induced draft blower
-
California Low NOx emissions-compliant models available
- Installation restrictions in California’s South Coast Air Quality Management District (SCAQMD) as of October 1, 2019
-
AHRI Certified; ETL Listed
Cabinet Features:
-
Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
-
Multi-position installation:
- GM9C80: upflow, horizontal left or right
- GC9C80: downflow, horizontal left or right
-
Removable bottom for side- or bottom-return applications
- Convenient left or right connection for gas/electric service
- Cabinet air leakage ≤ 2%
-
Coil and furnace fit flush for most installations
Goodman 1.5 - 2 Ton R32 Evaporator Coil Upflow/Downflow with Built-in TXV CAPTA2422A3
This all-aluminum evaporator coil, designed for R-32 refrigerant, features integrated thermal expansion valves for cooling and heat pumps. It offers flexible vertical and horizontal installation, with a 21-inch depth for easy attic access. The coil has foil-faced insulation to reduce condensation, a rust and UV-resistant drain pan with extra drainage, and a durable galvanized finish. AHRI certified and ETL listed, this coil ensures efficiency, durability, and easy maintenance for reliable HVAC performance.
- Refrigerant Type: R-32
- Unit Height: 22 in
- Unit Width: 14 in
- Cased/Uncased: Cased
- Tonnage: 2.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
- Evaporator Coil
- R-32 Refrigerant Coil
- High-Performance HVAC Solutions
- Thermal Expansion Valves
- Flexible Installation Options
- Foil-Faced Insulation
- Durable Drain Pan
- AHRI Certified Coil
- UV-Resistant Drain Pan
- Galvanized Finish Coil
Product Features for High-Performance All-Aluminum Evaporator Coil
-
R-32 Refrigerant Compatibility: Optimized specifically for R-32 refrigerant, ensuring efficient cooling and heating performance.
-
Integrated Thermal Expansion Valves: Factory-installed thermal expansion valves in CAPTA and CHPTA models for seamless cooling and heat pump applications.
-
Flexible Installation Options: Available in both vertical and horizontal configurations, providing versatile installation choices.
-
Compact Design: With a 21-inch depth, this coil is designed for easy access in tight spaces like attics.
-
Foil-Faced Insulation: Helps reduce cabinet condensation, enhancing overall system efficiency.
-
Durable Drain Pan: Features a rust-resistant, UV-resistant thermoplastic drain pan with low water retention and additional drainage connections.
-
Maintenance Convenience: Easy-to-remove drain pan rails simplify maintenance and repositioning.
-
Galvanized Finish: Durable, leather grain-embossed galvanized finish enhances longevity and resistance to wear.
-
AHRI Certified and ETL Listed: Certified for performance and safety, ensuring reliable operation in any HVAC system.
-
Optimized Circuits and Manifolds: Standardized copper suction tube stub length for improved installation and efficiency.
-
DecaBDE-Free Drain Pan: Environmentally friendly drain pan design with secondary drain connections for added functionality.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
