The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
The R32 Highly Efficient Gas Furnace is engineered for optimal heating performance, featuring a compact design with dimensions of 33-3/8" in height, 14" in width, and 28" in depth. With an impressive AFUE rating of 92% and a heating capacity of 40,000 BTU, this unit ensures efficient energy use and comfort. It includes advanced features such as a durable aluminized-steel tubular heat exchanger, a multi-speed ECM blower motor for quiet operation, and a self-diagnostic control board for easy maintenance. Compliant with California's low NOx emissions standards, this furnace is versatile for various installation configurations while offering enhanced environmental benefits through the use of R32 refrigerant.
- Unit Height: 33-3/8 in
- Unit Width: 14 in
- AFUE: 92 %
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 106 lb
- Model Efficiency: 0.92
- 40,000 BTU
- R32
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
Standard Features of R32 Highly Efficient 92% AFUE Gas Furnace
-
Heavy-duty Aluminized-Steel Tubular Heat Exchanger: Ensures durability and efficient heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Provides enhanced performance and longevity.
-
Single-Stage Gas Valve: Simplifies operation with reliable gas control.
-
Durable Silicon Nitride Igniter: Offers consistent ignition performance.
-
Multi-Speed ECM Blower Motor: Delivers energy-efficient airflow and improved comfort.
-
Quiet Single-Speed Induced Draft Blower: Ensures minimal operational noise.
-
Self-Diagnostic Control Board: Facilitates easy troubleshooting and maintenance.
-
California Compliance: Meets the 40 ng/J Low NOx emissions standard.
-
Installation Restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
-
AHRI Certified & ETL Listed: Guarantees high efficiency and safety standards.
-
Multi-Position Installation: Designed for upflow, horizontal left, or right configurations.
-
Ventilation Options: Certified for direct vent (2-pipe) or non-direct vent (1-pipe) setups.
-
Flexible Venting: Easy-to-install top venting with optional side venting for GR9S92/upflow models.
-
Convenient Gas & Electrical Connections: Available on the left or right side for easier installation.
Cabinet Features
-
Low Air Leakage: Cabinet air leakage (QLeak) ≤ 2% for energy efficiency.
-
Heavy-Gauge Steel Cabinet: Built to withstand wear with a durable finish.
-
Insulated Heat Exchanger Cabinet: Foil-faced insulation improves energy efficiency.
-
Airtight Bottom or Side Return: Features easy-cut tabs for hassle-free removal in bottom air-inlet applications.
Goodman 2.5 Ton R32 Evaporator Coil Upflow/Downflow CAPTA3022B3
This high-performance all-aluminum evaporator coil, designed for R-32 refrigerant, features integrated thermal expansion valves for cooling and heat pump applications. With flexible vertical and horizontal installation, its 21-inch depth allows easier attic access. The foil-faced insulation reduces condensation, while the rust-resistant, UV-resistant drain pan and galvanized finish ensure durability. Easy-to-remove drain pan rails simplify maintenance. AHRI certified and ETL listed, this coil delivers efficiency, durability, and reliability for HVAC systems.
- Refrigerant Type: R-32
- Unit Height: 22 in
- Unit Width: 17.5 in
- Cased/Uncased: Cased
- Tonnage: 2.5
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
-
Brand: Goodman
-
Model Number: CAPTA3022B3
-
Type: Cased Evaporator Coil
-
Tonnage: 2 - 2.5 Ton
-
Refrigerant Type: R-32
-
Suction Valve Size: 3/4''
-
Liquid Valve Size: 3/8''
-
Height: 22"
-
Width: 17.5"
-
Depth: 21''
-
Shipping Weight: 40 lbs
-
Application: Vertical
Product Features For Goodman 2 - 2.5 Ton R32 Vertical Evaporator Coil CAPTA3022B3
-
All-Aluminum Evaporator Coil: Designed for enhanced durability and performance.
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds specifically for R-32 applications.
-
Long-lasting R-32 Sensor: Engineered for the lifespan of the coil, ensuring efficient operation.
-
Factory-Installed Thermal Expansion Valves: Ideal for both cooling and heat pump applications.
-
Standardized Copper Suction Tube: Stub length for consistent installation.
-
Check Flowrator: Ensures optimal performance for cooling and heat pump systems.
-
Vertical Application: Flexible design for various installation configurations.
-
21" Depth: Allows easier access in attic spaces for installation and maintenance.
-
Single Front Access Panel: Simplifies service and maintenance tasks.
-
Foil-Faced Insulation: Reduces cabinet condensation for improved efficiency.
-
Galvanized Leather Grain Finish: Provides a durable and aesthetically pleasing surface.
-
Rust-Resistant Thermoplastic Drain Pan: Features a low water-retention design for reliability.
-
DecaBDE-Free Drain Pan: Equipped with secondary drain connections for added convenience.
-
Easy-Remove Drain Pan Rails: Facilitates quick removal and repositioning without compromising structural integrity.
-
UV-Resistant Drain Pan: Enhances longevity and performance under various environmental conditions.
-
AHRI Certified: Guarantees performance and efficiency standards.
-
ETL Listed: Ensures safety and quality compliance for HVAC systems.
View More Heat Pump & Furnace Systems
