This Goodman HVAC bundle offers a complete solution for year-round comfort with a 2 Ton R32 Split Heat Pump, a 92% AFUE Gas Furnace, and a 2 Ton R32 Horizontal Evaporator Coil. The heat pump provides efficient heating and cooling, while the gas furnace ensures cozy warmth during colder months with quiet and reliable operation. The evaporator coil complements the system with easy maintenance and durability. Together, these units deliver reliable performance, energy savings, and hassle-free installation, making them a great choice for maintaining a comfortable home all year long.
The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
The R32 Highly Efficient Gas Furnace is engineered for optimal heating performance, featuring a compact design with dimensions of 33-3/8" in height, 14" in width, and 28" in depth. With an impressive AFUE rating of 92% and a heating capacity of 40,000 BTU, this unit ensures efficient energy use and comfort. It includes advanced features such as a durable aluminized-steel tubular heat exchanger, a multi-speed ECM blower motor for quiet operation, and a self-diagnostic control board for easy maintenance. Compliant with California's low NOx emissions standards, this furnace is versatile for various installation configurations while offering enhanced environmental benefits through the use of R32 refrigerant.
- Unit Height: 33-3/8 in
- Unit Width: 14 in
- AFUE: 92 %
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 106 lb
- Model Efficiency: 0.92
- 40,000 BTU
- R32
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
Standard Features of R32 Highly Efficient 92% AFUE Gas Furnace
-
Heavy-duty Aluminized-Steel Tubular Heat Exchanger: Ensures durability and efficient heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Provides enhanced performance and longevity.
-
Single-Stage Gas Valve: Simplifies operation with reliable gas control.
-
Durable Silicon Nitride Igniter: Offers consistent ignition performance.
-
Multi-Speed ECM Blower Motor: Delivers energy-efficient airflow and improved comfort.
-
Quiet Single-Speed Induced Draft Blower: Ensures minimal operational noise.
-
Self-Diagnostic Control Board: Facilitates easy troubleshooting and maintenance.
-
California Compliance: Meets the 40 ng/J Low NOx emissions standard.
-
Installation Restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
-
AHRI Certified & ETL Listed: Guarantees high efficiency and safety standards.
-
Multi-Position Installation: Designed for upflow, horizontal left, or right configurations.
-
Ventilation Options: Certified for direct vent (2-pipe) or non-direct vent (1-pipe) setups.
-
Flexible Venting: Easy-to-install top venting with optional side venting for GR9S92/upflow models.
-
Convenient Gas & Electrical Connections: Available on the left or right side for easier installation.
Cabinet Features
-
Low Air Leakage: Cabinet air leakage (QLeak) ≤ 2% for energy efficiency.
-
Heavy-Gauge Steel Cabinet: Built to withstand wear with a durable finish.
-
Insulated Heat Exchanger Cabinet: Foil-faced insulation improves energy efficiency.
-
Airtight Bottom or Side Return: Features easy-cut tabs for hassle-free removal in bottom air-inlet applications.
Goodman 2 Ton R32 Horizontal Evaporator Coil 26"W x 17.5"H CHPTA2426B3
This high-performance evaporator coil is designed for R-32 refrigerant and includes integrated thermal expansion valves for cooling and heat pump applications. It offers flexible installation with both vertical and horizontal models and a 21-inch depth for easy attic access. Equipped with foil-faced insulation to reduce condensation, it features a rust-resistant, UV-resistant drain pan with extra drainage connections. Its durable galvanized finish and removable drain pan rails enhance longevity and maintenance. Certified by AHRI and ETL listed, this coil provides efficiency, durability, and ease of use for a reliable HVAC solution.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
- R-32 refrigerant optimized coil
- R-32 sensor lifespan
- Thermal expansion valves
- Copper suction tube stub
- Check Flowrator design
- Horizontal installation evaporator
- Compact attic access coil
- Foil-faced insulation benefits
- Durable galvanized finish
- Rust-resistant drain pan
- Secondary drain connections
- UV-resistant coil design
- AHRI certified efficiency
Product Features For R32 Horizontal Evaporator Coil
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds designed for efficiency.
-
R-32 Sensor: Enhances the coil's lifespan.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications.
-
Standardized Copper Suction Tube Stub: Ensures compatibility and ease of installation.
-
Check Flowrator: Designed for cooling and heat pump systems.
-
Horizontal Application: Specifically designed for horizontal installation.
-
Compact Depth: 21" depth for easier attic access.
-
Single Front Access Panel: Facilitates maintenance and service.
-
Foil-Faced Insulation: Reduces cabinet condensation.
-
Durable Finish: Galvanized leather grain-embossed finish for longevity.
-
Rust-Resistant Drain Pan: Low water-retention design with DecaBDE-free thermoplastic.
-
Secondary Drain Connections: For added drainage flexibility.
-
Easy Removal: Drain pan rails allow for quick repositioning of coils.
-
UV-Resistant: Designed for long-lasting performance.
-
AHRI Certified: Ensures compliance with industry standards.
View More Heat Pump & Furnace Systems
