The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 96% AFUE Gas Furnace 40,000 BTU Multi Speed ECM Downflow/Horizontal GC9S960403BN
The Goodman GC9S960403BN 96% AFUE Gas Furnace is a high-efficiency, 40,000 BTU, multi-speed ECM furnace designed for reliable downflow and horizontal installation. With its 96% AFUE rating, it provides energy-saving operation and meets AHRI certification and ETL safety standards. This furnace features a heavy-duty, aluminized-steel tubular heat exchanger and a stainless-steel secondary heat exchanger for enhanced durability and corrosion resistance. Its quiet operation is supported by a single-speed induced draft blower, while the self-diagnostic control board with constant memory simplifies troubleshooting. Ideal for California with low NOx emissions compliance, it is also compatible with electronic air cleaners and humidifiers.
- Unit Height: 33-3/8 in
- Unit Width: 17-1/2 in
- AFUE: 96 %
- 40,000 Btu/H
- Installation Configuration: Downflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 113 lb
- Model Efficiency: 0.96
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
-
High reliability and quality
-
Faster condensate water drainage with no unit water leakage
-
Durable igniter with a long lifespan
- Provisions for electronic air cleaner (EAC) and humidifier
-
Energy-efficient operation with quiet circulation
- Lower NOx emissions
-
Self-diagnostic control board with constant memory
- Meets AHRI certification performance requirements
- Complies with ETL North American safety standards
- Compatible with two-stage or single-stage thermostats
- Easy connections for EAC and humidifier
Product Features For 96% High Efficiency Gas Furnace GC9S960403BN
-
Heavy-duty Aluminized-Steel Tubular Heat Exchanger – Built for durability and long-lasting performance.
-
Stainless-Steel Secondary Heat Exchanger – Ensures high efficiency and resistance to corrosion.
-
Single-Stage Gas Valve – Optimized for energy-saving single-stage operation.
-
Durable Silicon Nitride Igniter – Reliable ignition designed for long-term use.
-
Quiet Single-Speed Induced Draft Blower – Operates smoothly with minimal noise.
-
Self-Diagnostic Control Board – Includes constant memory for fault code history, displayed via an LED.
-
California Low NOx Compliance – All models meet the 40 ng/J Low NOx emissions standard.
-
Restricted Installation in California’s SCAQMD – Not installable in the South Coast Air Quality Management District as of October 1, 2019.
-
AHRI Certified & ETL Listed – Ensures trusted certification and performance standards.
-
Versatile Multi-Position Installation
- GM9S96: Supports upflow and horizontal (left/right) configurations.
- GC9S96: Supports downflow and horizontal (left/right) configurations.
-
Certified for Direct Vent or Non-Direct Vent – Compatible with 2-pipe (direct) or 1-pipe (non-direct) venting.
-
Flexible Venting Options – Top venting with optional side venting for GM9S96/upflow models.
-
Left or Right Gas & Electrical Connection – Offers convenient connection options.
-
Efficient Cabinet Design – Ensures air leakage (QLeak) is ≤ 2%.
-
Heavy-Gauge Steel Cabinet – Coated for durability and longevity.
-
Fully Insulated Heat Exchanger and Blower Section – Enhances energy efficiency and sound reduction.
-
Airtight Solid Bottom or Side Return – Includes easy-cut tabs for quick removal in bottom air-inlet setups.
Goodman 2 Ton R32 Horizontal Evaporator Coil 26"W x 17.5"H CHPTA2426B3
This high-performance evaporator coil is designed for R-32 refrigerant and includes integrated thermal expansion valves for cooling and heat pump applications. It offers flexible installation with both vertical and horizontal models and a 21-inch depth for easy attic access. Equipped with foil-faced insulation to reduce condensation, it features a rust-resistant, UV-resistant drain pan with extra drainage connections. Its durable galvanized finish and removable drain pan rails enhance longevity and maintenance. Certified by AHRI and ETL listed, this coil provides efficiency, durability, and ease of use for a reliable HVAC solution.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
- R-32 refrigerant optimized coil
- R-32 sensor lifespan
- Thermal expansion valves
- Copper suction tube stub
- Check Flowrator design
- Horizontal installation evaporator
- Compact attic access coil
- Foil-faced insulation benefits
- Durable galvanized finish
- Rust-resistant drain pan
- Secondary drain connections
- UV-resistant coil design
- AHRI certified efficiency
Product Features For R32 Horizontal Evaporator Coil
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds designed for efficiency.
-
R-32 Sensor: Enhances the coil's lifespan.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications.
-
Standardized Copper Suction Tube Stub: Ensures compatibility and ease of installation.
-
Check Flowrator: Designed for cooling and heat pump systems.
-
Horizontal Application: Specifically designed for horizontal installation.
-
Compact Depth: 21" depth for easier attic access.
-
Single Front Access Panel: Facilitates maintenance and service.
-
Foil-Faced Insulation: Reduces cabinet condensation.
-
Durable Finish: Galvanized leather grain-embossed finish for longevity.
-
Rust-Resistant Drain Pan: Low water-retention design with DecaBDE-free thermoplastic.
-
Secondary Drain Connections: For added drainage flexibility.
-
Easy Removal: Drain pan rails allow for quick repositioning of coils.
-
UV-Resistant: Designed for long-lasting performance.
-
AHRI Certified: Ensures compliance with industry standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
View More Heat Pump & Furnace Systems
