The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 96% AFUE Gas Furnace 60,000 BTU Two Stage Downflow/Horizontal Multi Speed ECM GC9C960603BN
The Goodman GC9C960603BN 96% AFUE Gas Furnace delivers 60,000 BTU with a two-stage gas valve for quiet, economical heating. Designed for downflow or horizontal installation, it features a multi-speed ECM blower motor for optimal airflow and reduced energy consumption. This unit includes a durable aluminized-steel tubular heat exchanger and a stainless-steel secondary heat exchanger for enhanced efficiency and longevity. The Silicon Nitride igniter ensures reliable performance, while the self-diagnostic control board simplifies troubleshooting. Compliant with California's low NOx emissions standards and AHRI Certified, this furnace provides flexible installation options and minimal cabinet air leakage, ensuring energy savings and reliability.
- Unit Height: 33-3/8 in
- Unit Width: 17-1/2 in
- AFUE: 96 %
- 60,000 BTU
- Installation Configuration: Downflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 115 lb
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
Product Features For Goodman GC9C960603BN 96% Efficiency Gas Furnace
-
Energy-efficient, multi-speed ECM blower motor: Delivers optimal airflow while reducing energy consumption for cost-effective operation.
-
Heavy-duty, aluminized-steel tubular heat exchanger: Ensures maximum durability and efficient heat transfer for long-lasting performance.
-
Stainless-steel secondary heat exchanger: Enhances efficiency and corrosion resistance, contributing to the unit's longevity.
-
Two-stage gas valve: Provides quiet, economical heating by adjusting the gas flow based on demand, resulting in improved comfort and efficiency.
- Durable Silicon Nitride igniter: Known for its reliability and extended lifespan, reducing maintenance requirements.
-
Quiet two-speed induced draft blower: Ensures efficient air circulation while maintaining a peaceful indoor atmosphere.
-
Self-diagnostic control board: Features constant memory with LED fault code history for easy troubleshooting and enhanced reliability.
-
Color-coded low-voltage terminals: Simplifies wiring and includes provisions for an electronic air cleaner and humidifier.
-
Low continuous fan speed options: Offer quiet air circulation for improved comfort without noise disturbance.
- All models comply with California 40 ng/J Low NOx emissions standard: Supports environmentally friendly heating solutions.
- Installation restrictions in California’s SCAQMD after October 1, 2019: Adheres to regional air quality regulations.
-
AHRI Certified and ETL Listed: Ensures compliance with industry standards for performance and safety.
-
Multi-position installation: Designed for downflow, horizontal left or right configurations, allowing flexible placement.
- Certified for direct vent (2-pipe) and non-direct vent (1-pipe): Versatile venting options accommodate various installation scenarios.
- Easy-to-install top venting with optional side venting: Simplifies setup, enhancing user convenience.
- Convenient left or right connection for gas and electrical service: Facilitates straightforward installation and accessibility.
-
Cabinet air leakage (QLeak) ≤ 2%: Ensures optimal efficiency and energy savings through minimal leakage.
-
Heavy-gauge steel cabinet: Provides robust protection and a durable finish for long-lasting use.
- Fully insulated heat exchanger and blower section: Reduces heat loss and improves overall system efficiency.
- Airtight solid bottom or side return: Designed with easy-cut tabs for effortless removal in bottom air-inlet applications, simplifying maintenance.
Goodman 2 Ton R32 Horizontal Evaporator Coil 26"W x 17.5"H CHPTA2426B3
This high-performance evaporator coil is designed for R-32 refrigerant and includes integrated thermal expansion valves for cooling and heat pump applications. It offers flexible installation with both vertical and horizontal models and a 21-inch depth for easy attic access. Equipped with foil-faced insulation to reduce condensation, it features a rust-resistant, UV-resistant drain pan with extra drainage connections. Its durable galvanized finish and removable drain pan rails enhance longevity and maintenance. Certified by AHRI and ETL listed, this coil provides efficiency, durability, and ease of use for a reliable HVAC solution.
- Refrigerant Type: R-32
- Unit Height: 17.5 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
- R-32 refrigerant optimized coil
- R-32 sensor lifespan
- Thermal expansion valves
- Copper suction tube stub
- Check Flowrator design
- Horizontal installation evaporator
- Compact attic access coil
- Foil-faced insulation benefits
- Durable galvanized finish
- Rust-resistant drain pan
- Secondary drain connections
- UV-resistant coil design
- AHRI certified efficiency
Product Features For R32 Horizontal Evaporator Coil
-
Optimized for R-32 Refrigerant: Includes circuits and manifolds designed for efficiency.
-
R-32 Sensor: Enhances the coil's lifespan.
-
Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications.
-
Standardized Copper Suction Tube Stub: Ensures compatibility and ease of installation.
-
Check Flowrator: Designed for cooling and heat pump systems.
-
Horizontal Application: Specifically designed for horizontal installation.
-
Compact Depth: 21" depth for easier attic access.
-
Single Front Access Panel: Facilitates maintenance and service.
-
Foil-Faced Insulation: Reduces cabinet condensation.
-
Durable Finish: Galvanized leather grain-embossed finish for longevity.
-
Rust-Resistant Drain Pan: Low water-retention design with DecaBDE-free thermoplastic.
-
Secondary Drain Connections: For added drainage flexibility.
-
Easy Removal: Drain pan rails allow for quick repositioning of coils.
-
UV-Resistant: Designed for long-lasting performance.
-
AHRI Certified: Ensures compliance with industry standards.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
View More Heat Pump & Furnace Systems
