The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman Gas Furnace 96% AFUE 80,000 BTU Upflow/Horizontal Single-Stage GM9S960803BN
The Goodman Gas Furnace GM9S960803BN offers 96% AFUE efficiency, reducing energy costs while delivering reliable heating. Its nine-speed heating system provides precise temperature control. Built with a durable aluminized-steel tubular heat exchanger and a stainless-steel secondary heat exchanger, it ensures longevity and enhanced heat retention. The single-stage gas valve and Silicon Nitride igniter guarantee quiet, efficient operation. Featuring a self-diagnostic control board for easy troubleshooting and flexible installation options, this fully insulated furnace maximizes efficiency and minimizes noise, making it an ideal choice for energy-efficient heating.
- Unit Height: 33.375 in
- Unit Width: 17.5 in
- AFUE: 96 %
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Nine Speed ECM
- Unit Weight: 114 lb
- Unit Depth: 28 in
- Goodman Gas Furnace
- 96% AFUE Efficiency
- Nine-Speed Heating System
- Single-Stage Gas Valve
- Durable Heat Exchanger
- Self-Diagnostic Control Board
- Energy-Efficient Heating
- Upflow/Horizontal Installation
Product Features for Goodman 96% AFUE Gas Furnace GM9S960803BN
-
High AFUE Rating: Achieves an impressive 96% Annual Fuel Utilization Efficiency (AFUE) for reduced energy bills.
-
Aluminized-Steel Tubular Heat Exchanger: Ensures durability and efficient heat transfer, maximizing comfort.
-
Stainless-Steel Secondary Heat Exchanger: Enhances heat retention and longevity, offering superior performance.
-
Silicon Nitride Igniter: Provides reliable ignition for consistent heating with minimal maintenance.
-
Single-Speed Induced Draft Blower: Ensures quiet and efficient operation while circulating warm air throughout your home.
-
Self-Diagnostic Control Board: Simplifies troubleshooting, enhancing reliability and ease of maintenance.
-
Flexible Installation: Left or right connection options for gas and electrical service to suit various setups.
-
Fully Insulated Design: Insulated heat exchanger and blower section minimize noise and improve efficiency.
Goodman 1.5 - 2 Ton R32 Evaporator Coil Upflow/Downflow Cased 22"H x 17.5"W CAPTA2422B3
The all-aluminum evaporator coil is optimized for R-32 refrigerant and features a lifespan-extending R-32 sensor and factory-installed thermal expansion valves for cooling and heat pump applications. Its vertical design with a 21" depth allows easy attic access. The coil includes a front access panel and foil-faced insulation to reduce condensation. The rust-resistant, UV-resistant thermoplastic drain pan has a low water-retention design and secondary drain connections. AHRI certified and ETL listed for reliable performance.
- Refrigerant Type: R-32
- Unit Height: 22 in
- Unit Width: 17.5 in
- Cased/Uncased: Cased
- Tonnage: 2.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
- Evaporator Coil
- R-32 Refrigerant Coil
- High-Performance HVAC Solutions
- Thermal Expansion Valves
- Flexible Installation Options
- Foil-Faced Insulation
- Durable Drain Pan
- AHRI Certified Coil
- UV-Resistant Drain Pan
- Galvanized Finish Coil
Product Features for High-Performance All-Aluminum Evaporator Coil
-
R-32 Refrigerant Compatibility: Optimized specifically for R-32 refrigerant, ensuring efficient cooling and heating performance.
-
Integrated Thermal Expansion Valves: Factory-installed thermal expansion valves in CAPTA and CHPTA models for seamless cooling and heat pump applications.
-
Flexible Installation Options: Available in both vertical and horizontal configurations, providing versatile installation choices.
-
Compact Design: With a 21-inch depth, this coil is designed for easy access in tight spaces like attics.
-
Foil-Faced Insulation: Helps reduce cabinet condensation, enhancing overall system efficiency.
-
Durable Drain Pan: Features a rust-resistant, UV-resistant thermoplastic drain pan with low water retention and additional drainage connections.
-
Maintenance Convenience: Easy-to-remove drain pan rails simplify maintenance and repositioning.
-
Galvanized Finish: Durable, leather grain-embossed galvanized finish enhances longevity and resistance to wear.
-
AHRI Certified and ETL Listed: Certified for performance and safety, ensuring reliable operation in any HVAC system.
-
Optimized Circuits and Manifolds: Standardized copper suction tube stub length for improved installation and efficiency.
-
DecaBDE-Free Drain Pan: Environmentally friendly drain pan design with secondary drain connections for added functionality.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
View More Heat Pump & Furnace Systems
