The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 92% AFUE Gas Furnace 60,000 BTU Multi Speed ECM GM9S920603BN
The Goodman 92% AFUE GM9S92 Gas Furnace offers exceptional energy efficiency and reliable heating performance with a 60,000 BTU output. Designed for upflow or horizontal installation, this single-stage furnace features a multi-speed ECM blower motor for optimal airflow and quiet operation. Its durable construction and aluminized-steel heat exchanger ensure longevity, while advanced diagnostics provide easy troubleshooting. With a 92% AFUE rating, this furnace effectively reduces energy costs, making it an excellent choice for comfortable, efficient home heating.
- Unit Height: 33.375 in
- Unit Width: 17.5 in
- AFUE: 92 %
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 114 lb
- Unit Depth: 28 in
Product Features for Goodman 92% AFUE GM9S920603BN Gas Furnace
-
Heavy-Duty Aluminized-Steel Tubular Heat Exchanger: Durable construction ensures efficient heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Enhances overall performance and longevity.
-
Single-Stage Gas Valve: Delivers reliable and consistent heating throughout the home.
-
Durable Silicon Nitride Igniter: Improves ignition reliability and reduces maintenance needs.
-
Multi-Speed ECM Blower Motor: Provides efficient air circulation while saving energy.
-
Quiet Single-Speed Induced Draft Blower: Minimizes operational noise for a comfortable environment.
-
Self-Diagnostic Control Board: Simplifies troubleshooting and maintenance for ease of use.
-
California 40 ng/J Low NOx Compliance: Meets strict emissions standards for cleaner operation.
-
SCAQMD Compliance: Adheres to installation restrictions in California's South Coast Air Quality Management District.
-
AHRI Certified and ETL Listed: Confirms adherence to industry safety and efficiency standards.
Cabinet Features
-
Multi-Position Installation: Can be installed in upflow, horizontal left, or right configurations for versatility.
-
Flexible Venting Options: Certified for direct vent (2-pipe) or non-direct vent (1-pipe) installations.
-
Easy-to-Install Top Venting: Optional side venting available for upflow models for installation convenience.
-
Convenient Gas and Electrical Connections: Gas and electrical connections can be made on the left or right for simplified installation.
-
Optimal Efficiency: Cabinet air leakage (QLeak) ≤ 2% ensures reduced energy loss.
-
Heavy-Gauge Steel Cabinet: Provides robust protection and durability with a strong finish.
-
Foil-Faced Insulated Heat Exchanger Cabinet: Enhances thermal efficiency for better performance.
-
Airtight Solid Bottom or Side Return: Features easy-cut tabs for effortless removal in bottom air-inlet applications.
Goodman 1.5 - 2 Ton R32 Evaporator Coil Upflow/Downflow Cased 22"H x 17.5"W CAPTA2422B3
The all-aluminum evaporator coil is optimized for R-32 refrigerant and features a lifespan-extending R-32 sensor and factory-installed thermal expansion valves for cooling and heat pump applications. Its vertical design with a 21" depth allows easy attic access. The coil includes a front access panel and foil-faced insulation to reduce condensation. The rust-resistant, UV-resistant thermoplastic drain pan has a low water-retention design and secondary drain connections. AHRI certified and ETL listed for reliable performance.
- Refrigerant Type: R-32
- Unit Height: 22 in
- Unit Width: 17.5 in
- Cased/Uncased: Cased
- Tonnage: 2.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
- Evaporator Coil
- R-32 Refrigerant Coil
- High-Performance HVAC Solutions
- Thermal Expansion Valves
- Flexible Installation Options
- Foil-Faced Insulation
- Durable Drain Pan
- AHRI Certified Coil
- UV-Resistant Drain Pan
- Galvanized Finish Coil
Product Features for High-Performance All-Aluminum Evaporator Coil
-
R-32 Refrigerant Compatibility: Optimized specifically for R-32 refrigerant, ensuring efficient cooling and heating performance.
-
Integrated Thermal Expansion Valves: Factory-installed thermal expansion valves in CAPTA and CHPTA models for seamless cooling and heat pump applications.
-
Flexible Installation Options: Available in both vertical and horizontal configurations, providing versatile installation choices.
-
Compact Design: With a 21-inch depth, this coil is designed for easy access in tight spaces like attics.
-
Foil-Faced Insulation: Helps reduce cabinet condensation, enhancing overall system efficiency.
-
Durable Drain Pan: Features a rust-resistant, UV-resistant thermoplastic drain pan with low water retention and additional drainage connections.
-
Maintenance Convenience: Easy-to-remove drain pan rails simplify maintenance and repositioning.
-
Galvanized Finish: Durable, leather grain-embossed galvanized finish enhances longevity and resistance to wear.
-
AHRI Certified and ETL Listed: Certified for performance and safety, ensuring reliable operation in any HVAC system.
-
Optimized Circuits and Manifolds: Standardized copper suction tube stub length for improved installation and efficiency.
-
DecaBDE-Free Drain Pan: Environmentally friendly drain pan design with secondary drain connections for added functionality.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
View More Heat Pump & Furnace Systems
