The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
The Goodman 97% AFUE Gas Furnace (80,000 BTU) is a high-efficiency, low NOx furnace that combines advanced comfort control with energy savings. Equipped with ComfortBridge™ Technology compatibility, this variable-speed ECM motor model optimizes airflow and adjusts to your home's needs, enhancing both comfort and energy efficiency. Its durable, heavy-gauge steel construction ensures longevity, while the stainless-steel heat exchanger delivers reliable performance. With multi-position installation (downflow/horizontal), direct and non-direct venting, and convenient connections, this furnace is versatile and easy to install. Its Energy Star certification, low NOx emissions, make it a smart, eco-friendly choice.
- NOx Burner Type: Low NOx
- Energy Star Certified: Yes
- Unit Height: 34-1/2 in
- Unit Width: 21 in
- Communication Feature Type: ComfortBridge Technology compatible
- AFUE: 97 %
- Installation Configuration: Downflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Variable Speed ECM
- Model Efficiency: 0.97
- Unit Depth: 29 in
- Heat Exchanger Type: Gas
- High reliability and quality with adaptive airflow.
- Prevents water leakage with fast condensate drainage.
- Auto-configures for each installation type.
- Works with two-stage and single-stage thermostats.
- Long-life igniter and durable build.
- Self-diagnostic control board with fault code memory.
- Supports electronic air cleaner and humidifier.
- Energy-efficient with precise comfort control and low NOx emissions.
- AHRI certified, ETL safety compliant, and tax credit eligible.
- Easy connection for EAC and humidifier.
- Multi-position installation (downflow, horizontal left/right).
- Direct and non-direct venting options.
- Easy top or side venting installation.
- Flexible gas and electrical connections.
- Low air leakage (≤ 2%) with insulated sections.
- Heavy-gauge, durable steel construction.
Product Features For Goodman 97% Highly Efficient Low NOx Gas Furnace
- Integrated ComfortBridge™ Technology for seamless communication.
- Commissioning and diagnostics via Bluetooth with CoolCloud™ app for mobile devices.
- Heavy-duty aluminized-steel tubular heat exchanger for durability.
-
Stainless-steel secondary heat exchanger for increased longevity.
- Self-calibrating modulating gas valve with automatic configuration.
- Durable Silicon Nitride igniter for extended lifespan.
- Quiet, variable-speed induced draft blower for low-noise operation.
-
Self-diagnostic control board with memory fault code history on a dual 7-segment display.
-
Color-coded low-voltage terminals support electronic air cleaner connections.
- Efficient, quiet, variable-speed airflow system adjusts with heating/cooling demand.
- Multiple continuous fan speed options for quiet air circulation.
-
Auto-Comfort and enhanced dehumidification modes for optimal indoor climate.
- Complies with California 40 ng/J Low NOx emissions standard.
- Non-compliant with California’s SCAQMD installation standards as of Oct 1, 2019.
-
AHRI Certified and ETL Listed for safety and efficiency.
- Designed for multi-position installation:
-
GMVM97: upflow, horizontal left/right
-
GCVM97: downflow, horizontal left/right
- Certified for direct vent (2-pipe) or non-direct vent (1-pipe).
- Simple top venting installation with optional side venting.
- Left or right gas and electrical connections for convenient installation.
- Cabinet air leakage (QLeak) ≤ 2% for energy efficiency.
-
Heavy-gauge steel cabinet with a durable finish for long-lasting use.
- Fully insulated heat exchanger and blower sections for enhanced performance.
- Airtight solid bottom or side return with easy-cut tabs for easy removal in bottom air-inlet applications.
The Goodman CHPTA2426C3 R32 Evaporator Coil features a 26" wide cased horizontal-A design, with optimized R-32 compatibility and factory-installed TXV for efficient cooling and heat pump support. This all-aluminum coil includes a durable galvanized cabinet, UV-resistant, DecaBDE-free thermoplastic drain pan with secondary connections, and foil-faced insulation to minimize condensation. Its 21" depth ensures easy attic access, while a single front panel allows for streamlined servicing. AHRI certified and ETL listed, this coil is engineered for efficiency, safety, and longevity in demanding HVAC applications.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal-A Evaporator Coil
-
All-Aluminum evaporator coil: Lightweight and efficient for reliable performance.
-
Optimized for R-32 refrigerant: Includes specialized circuits and manifold, enhancing compatibility and efficiency.
-
R-32 sensor: Designed to last the coil’s full lifespan, ensuring consistent performance.
-
Factory-installed thermal expansion valves: Supports cooling and heat pump applications for optimal performance.
-
Standardized copper suction tube stub length: Simplifies installation and compatibility across systems.
-
Check flowrator: Provides reliable flow control for both cooling and heat pump setups.
-
Horizontal application: Suitable for various installation orientations.
-
21" depth: Allows easier access in tight spaces, such as attics.
-
Single front access panel: Simplifies servicing and maintenance.
-
Foil-faced insulation: Reduces cabinet condensation for improved efficiency.
-
Galvanized, leather grain-embossed finish: Durable and rust-resistant for long-lasting performance.
-
Rust-resistant thermoplastic drain pan: Features a low water-retention design to prevent buildup.
-
DecaBDE-free thermoplastic drain pan: Includes secondary drain connections for added drainage options.
-
Drain pan rails: Enable easy removal and repositioning of coils without compromising structure.
-
UV-resistant drain pan: Protects against sun damage, enhancing durability.
-
AHRI certified and ETL Listed: Compliant with industry standards for quality and safety.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
View More Heat Pump & Furnace Systems
