The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
Goodman 98% AFUE Gas Furnace 80,000 BTU Variable Speed ECM Modulating Upflow/Horizontal Low NOx GMVM970804CN
The Goodman GMVM970804CN 98% AFUE Gas Furnace provides 80,000 BTUs of efficient heating with a variable speed ECM motor and modulating gas valve for personalized comfort. Compatible with upflow or horizontal installations, it features ComfortBridge™ Technology for improved system performance. The durable aluminized-steel and stainless-steel heat exchangers ensure longevity, while the Silicon Nitride igniter guarantees reliable operation. With a self-diagnostic control board, low NOx emissions compliance, and Energy Star certification, this furnace promotes eco-friendly heating. Its quiet operation and minimal cabinet air leakage enhance comfort and energy savings, making it an excellent choice for efficient home heating.
- NOx Burner Type: Low NOx
- Energy Star Certified: Yes
- Unit Height: 34-1/2 in
- Unit Width: 21 in
- Communication Feature Type: ComfortBridge Technology compatible
- AFUE: 98 %
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15.0 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Variable Speed ECM
- Model Efficiency: 0.97
- Unit Depth: 29 in
- Heat Exchanger Type: Gas
Product Features For Goodman GMVM970804CN 98% Highly Efficient Gas Furnace
-
Integrated communicating ComfortBridge™ Technology: Enhances system performance and communication for smarter heating and cooling solutions.
-
Commissioning and diagnostics via onboard Bluetooth: Utilize the CoolCloud phone and tablet application for easy setup and troubleshooting.
-
Heavy-duty aluminized-steel tubular heat exchanger: Provides exceptional durability and efficient heat transfer for long-lasting operation.
-
Stainless-steel secondary heat exchanger: Increases efficiency and resistance to corrosion, enhancing the unit's lifespan.
-
Self-calibrating modulating gas valve: Automatically configures for each installation, optimizing performance and efficiency.
- Durable Silicon Nitride igniter: Offers reliable operation and extended lifespan, reducing the need for maintenance.
-
Quiet variable-speed induced draft blower: Ensures efficient airflow while maintaining a tranquil indoor environment.
-
Self-diagnostic control board: Features constant memory with fault code history displayed on a dual 7-segment display for easy troubleshooting.
-
Color-coded low-voltage terminals: Simplify wiring and include provisions for an electronic air cleaner.
-
Efficient variable-speed airflow system: Gently ramps up or down according to heating or cooling demand for optimal comfort.
-
Multiple continuous fan speed options: Provide quiet air circulation for enhanced indoor comfort without noise disturbances.
-
Auto-Comfort and enhanced dehumidification modes: Improve comfort levels by adjusting humidity and temperature settings as needed.
- All models comply with California 40 ng/J Low NOx emissions standard: Supports environmentally responsible heating solutions.
- Installation restrictions in California’s SCAQMD after October 1, 2019: Ensures compliance with regional air quality regulations.
-
AHRI Certified and ETL Listed: Guarantees adherence to industry standards for performance and safety.
-
Multi-position installation: Designed for upflow, downflow, or horizontal left/right configurations for versatile placement.
- Certified for direct vent (2-pipe) and non-direct vent (1-pipe): Offers flexible venting options for various installation scenarios.
- Easy-to-install top venting with optional side venting: Simplifies installation and enhances convenience for users.
- Convenient left or right connection for gas and electrical service: Facilitates straightforward installation and access.
-
Cabinet air leakage (QLeak) ≤ 2%: Ensures optimal efficiency and energy savings through minimal leakage.
-
Heavy-gauge steel cabinet: Provides robust protection and a durable finish for long-lasting performance.
- Fully insulated heat exchanger and blower section: Enhances efficiency by reducing heat loss and improving comfort.
- Airtight solid bottom or side return: Designed with easy-cut tabs for effortless removal in bottom air-inlet applications, simplifying maintenance.
The Goodman CHPTA2426C3 R32 Evaporator Coil features a 26" wide cased horizontal-A design, with optimized R-32 compatibility and factory-installed TXV for efficient cooling and heat pump support. This all-aluminum coil includes a durable galvanized cabinet, UV-resistant, DecaBDE-free thermoplastic drain pan with secondary connections, and foil-faced insulation to minimize condensation. Its 21" depth ensures easy attic access, while a single front panel allows for streamlined servicing. AHRI certified and ETL listed, this coil is engineered for efficiency, safety, and longevity in demanding HVAC applications.
- Refrigerant Type: R-32
- Unit Height: 21 in
- Unit Width: 26 in
- Cased/Uncased: Cased
- Coil Application: Horizontal A
- Unit Depth: 21 in
Product Features For Goodman R32 Horizontal-A Evaporator Coil
-
All-Aluminum evaporator coil: Lightweight and efficient for reliable performance.
-
Optimized for R-32 refrigerant: Includes specialized circuits and manifold, enhancing compatibility and efficiency.
-
R-32 sensor: Designed to last the coil’s full lifespan, ensuring consistent performance.
-
Factory-installed thermal expansion valves: Supports cooling and heat pump applications for optimal performance.
-
Standardized copper suction tube stub length: Simplifies installation and compatibility across systems.
-
Check flowrator: Provides reliable flow control for both cooling and heat pump setups.
-
Horizontal application: Suitable for various installation orientations.
-
21" depth: Allows easier access in tight spaces, such as attics.
-
Single front access panel: Simplifies servicing and maintenance.
-
Foil-faced insulation: Reduces cabinet condensation for improved efficiency.
-
Galvanized, leather grain-embossed finish: Durable and rust-resistant for long-lasting performance.
-
Rust-resistant thermoplastic drain pan: Features a low water-retention design to prevent buildup.
-
DecaBDE-free thermoplastic drain pan: Includes secondary drain connections for added drainage options.
-
Drain pan rails: Enable easy removal and repositioning of coils without compromising structure.
-
UV-resistant drain pan: Protects against sun damage, enhancing durability.
-
AHRI certified and ETL Listed: Compliant with industry standards for quality and safety.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
View More Heat Pump & Furnace Systems
