The system features a high-efficiency compressor with Smart-Shift technology for quiet defrosting and enhanced aluminum fin coils for better heat transfer. It includes a single-speed PSC fan motor, bi-flow filter drier, suction-line accumulator, compressor crankcase heater, and high-capacity muffler. With high- and low-pressure switches, service valves, and a full charge for 15 feet of tubing, it ensures easy installation. AHRI Certified and ETL Listed for reliable performance.
- Heating Capacity Nominal: 24000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Rotary
- Unit Weight: 160 lb
- Unit Depth: 29 in
-
Removable grille-style top design complies with UL 60335-2-40 standards
- Includes steel louver coil guard for added protection
- Constructed from heavy-gauge galvanized steel for durability
- Finished in Architectural Gray powder-coat with 500-hour salt-spray approval
- Provides top and side maintenance access for easy servicing
- Meets 2023 Florida Building Code for hurricane-type winds when properly anchored
-
Anchor bracket kits available for compliance with wind requirements
Product Features For Goodman 2 Ton Heat Pump Condenser GLZS4BA2410
-
High-efficiency compressor for optimal performance
-
SmartShift technology for quiet and reliable defrosting
-
Enhanced aluminum fin coil with 5 mm diameter for 1.5T-3.5T units
-
Aluminum fin coil with 7 mm diameter copper tubes for 4.0-5.0T units
-
Single-speed PSC condenser fan motor for energy efficiency
-
Factory-installed bi-flow liquid-line filter drier for system protection
-
Factory-installed suction-line accumulator for improved performance
-
Factory-installed compressor crankcase heater for enhanced safety
-
Factory-installed high-capacity muffler for reduced noise levels
-
High-pressure and low-pressure switches for system safety
-
Service valves with sweat connections for easy gauge access
-
Fully charged for 15 feet of tubing length for convenience
-
Fully enclosed contactor with secure lug connection for reliability
-
Ground lug connection for electrical safety
-
Extended-life capacitors for increased durability
-
AHRI Certified and ETL Listed for quality assurance
| Brand |
Goodman |
Model # |
GLZS4BA2410 |
| Heating (BTU/h) |
24,000 Btu/H |
Cooling (BTU/h) |
24,000 Btu/H |
| Refrigerant Type |
R-32 |
SEER 2 |
14.3 |
| Unit Depth |
29 in |
Unit Height |
32.5 in |
| Unit Width |
29 in |
Max Overcurrent Protection |
15 A |
| Power Voltage/Phase |
208/230V - 1Ph |
Compressor Stages |
Single Stage |
| Compressor Type |
Rotary |
Motor Type |
PSC |
| Liquid Line/Suction Line |
⅜" / ¾" |
Decibels |
74 |
| Valve Connection Type |
Sweat |
Refrigerant Charge (oz.) |
70 |
| Minimum Circuit Ampacity |
11.2 |
Electrical Conduit Size |
1/2" or 3/4" |
| Equipment Weight (lbs.) |
150 |
Shipping Weight (lbs) |
165 |
| Ton |
2 |
|
|
Goodman 96% AFUE 80,000 BTU Gas Furnace Two-Stage Upflow/Horizontal Multi-Speed GM9C960803BN
The GM9C960803BN Goodman gas furnace stands out as a high-efficiency solution, packed with money-saving features. This two-stage, 9-speed furnace boasts a superior heat exchanger, ensuring optimal heat transfer to your home. Recognized for its top-tier efficiency, the smart choice for those seeking to reduce their gas bills.
- Unit Height: 33.375 in
- Unit Width: 17.5 in
- AFUE: 96 %
- 80,000 BTU
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Nine Speed ECM
- Unit Weight: 118 lb
- Unit Depth: 28 in
- Stainless-steel secondary heat exchanger
- Silicon Nitride ignitor
- Multi-speed ECM blower motor
- Two-stage gas valve
- Two-speed induced draft blower
- Self-diagnostic control board
-
Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
-
Left or right connection for gas and electrical service
-
Fully insulated heat exchanger and blower section
Product Features For Goodman 96% AFUE 80,000 BTU High-Efficiency Gas Furnace
- Energy-efficient multi-speed ECM blower motor
- Heavy-duty aluminized-steel tubular heat exchanger
- Stainless-steel secondary heat exchanger
-
Two-stage gas valve for quiet, economical heating
-
Durable Silicon Nitride igniter for reliability
-
Quiet two-speed induced draft blower for efficient operation
-
Self-diagnostic control board with LED fault code history
-
Color-coded low-voltage terminals for electronic air cleaner and humidifier compatibility
-
Low continuous fan speed options for quiet air circulation
- California 40 ng/J Low NOx emissions compliance
-
Installation restriction in California’s South Coast Air Quality Management District (SCAQMD) after October 1, 2019
-
AHRI Certified and ETL Listed for quality assurance
-
Multi-position installation designed for upflow and horizontal configurations
-
Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
-
Easy-to-install top venting with optional side venting
- Convenient left or right connection for gas and electrical service
-
Cabinet air leakage (QLeak) ≤ 2% for improved efficiency
-
Heavy-gauge steel cabinet with durable finish
-
Fully insulated heat exchanger and blower section for optimal performance
-
Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications
| Brand |
Goodman |
Model # |
GM9C960803BN
|
| AFUE |
96% |
BtuH Input |
80,000 |
| BtuH Output |
76,800 |
CFM @ 0.5" ESP |
1,347 |
| Configuration |
Upflow/Horizontal |
Depth |
28-3/4" |
| Energy Star |
Yes |
LoNox |
No |
| Min. Circuit Amps |
8 |
Motor Type |
ECM |
| Nom. CFM |
1200 |
Nom. Tons |
3 |
| Stages |
Two-Stage |
Vent Size |
2"-3" |
| Width |
17-1/2" |
Wt. Lbs. |
118 |
| Shipping Height |
38.50 |
Shipping Width |
18.5 |
Goodman 1.5 - 2 Ton R32 Evaporator Coil Upflow/Downflow Cased 22"H x 14"W CAPTA2422B3
The all-aluminum evaporator coil is optimized for R-32 refrigerant and features a lifespan-extending R-32 sensor and factory-installed thermal expansion valves for cooling and heat pump applications. Its vertical design with a 21" depth allows easy attic access. The coil includes a front access panel and foil-faced insulation to reduce condensation. The rust-resistant, UV-resistant thermoplastic drain pan has a low water-retention design and secondary drain connections. AHRI certified and ETL listed for reliable performance.
- Refrigerant Type: R-32
- Unit Height: 22 in
- Unit Width: 17.5 in
- Cased/Uncased: Cased
- Tonnage: 2.0
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
- Evaporator Coil
- R-32 Refrigerant Coil
- High-Performance HVAC Solutions
- Thermal Expansion Valves
- Flexible Installation Options
- Foil-Faced Insulation
- Durable Drain Pan
- AHRI Certified Coil
- UV-Resistant Drain Pan
- Galvanized Finish Coil
Product Features for High-Performance All-Aluminum Evaporator Coil
-
R-32 Refrigerant Compatibility: Optimized specifically for R-32 refrigerant, ensuring efficient cooling and heating performance.
-
Integrated Thermal Expansion Valves: Factory-installed thermal expansion valves in CAPTA and CHPTA models for seamless cooling and heat pump applications.
-
Flexible Installation Options: Available in both vertical and horizontal configurations, providing versatile installation choices.
-
Compact Design: With a 21-inch depth, this coil is designed for easy access in tight spaces like attics.
-
Foil-Faced Insulation: Helps reduce cabinet condensation, enhancing overall system efficiency.
-
Durable Drain Pan: Features a rust-resistant, UV-resistant thermoplastic drain pan with low water retention and additional drainage connections.
-
Maintenance Convenience: Easy-to-remove drain pan rails simplify maintenance and repositioning.
-
Galvanized Finish: Durable, leather grain-embossed galvanized finish enhances longevity and resistance to wear.
-
AHRI Certified and ETL Listed: Certified for performance and safety, ensuring reliable operation in any HVAC system.
-
Optimized Circuits and Manifolds: Standardized copper suction tube stub length for improved installation and efficiency.
-
DecaBDE-Free Drain Pan: Environmentally friendly drain pan design with secondary drain connections for added functionality.
| Brand |
Goodman |
Model # |
CAPTA2422B3 |
| Type |
Evaporator Coils |
Ton
|
1.5 - 2 Ton |
| Refrigerant Type |
R-32 |
Suction Valve Size |
3/4'' |
| Liquid Valve Size |
3/8'' |
Height |
22" |
| Width |
17.5" |
Depth |
21'' |
| Shipping Weight (lbs.) |
40 |
Application |
Vertical |
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
