Goodman R32 3.5 Ton Air Conditioner Condenser 14.3 SEER2 42000 BTU GLXS4BA4210
This HVAC system features a high-efficiency scroll compressor for optimal cooling and energy savings. It includes a high-density foam sound blanket for quieter operation and advanced Copeland CoreSense Technology for enhanced reliability and diagnostics. Pre-charged with refrigerant for up to 15 feet of tubing, it simplifies installation. The system boasts a durable copper and aluminum fin coil, a factory-installed filter drier, and easy-to-access service valves. It also has a secure enclosed contactor, a high-pressure switch for safety, and long-lasting capacitors. Certified by AHRI for performance and ETL Listed for safety, it ensures reliable, efficient operation.
- Refrigerant Type: R-32
- SEER 2: 14.3
- Unit Height: 35.75 in
- Unit Width: 35.5 in
- Communication Feature Type: Non-Communicating
- Cooling Capacity Nominal: 42000 Btu/H
- Max Overcurrent Protection: 30 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 72 lb
- Tonnage: 3.5
- Model Efficiency: 15.2 SEER2
- Unit Depth: 35.5 in
-
Energy-efficient compressor with filter drier
-
Fully charged for 15' tubing
-
Copper tube with aluminum fin coil
- Sweat connection valves
-
Enclosed contactor and switch
-
Ground lug and long-life capacitors
-
AHRI Certified and ETL Listed
-
Removable grille (UL 60335-2-40)
-
Venturi design for airflow
-
Architectural Gray finish (500-hour salt-spray)
-
Wire fan grille and coil guard
-
Top/side access with single-panel controls
Product Features For Goodman 3.5 Ton R-32 Split System Air Conditioner
-
Energy-efficient compressor: Maximizes energy savings while providing reliable cooling and heating.
-
Fully charged for 15' of tubing length: Ensures quick installation and immediate system operation.
-
Copper tube and enhanced aluminum fin coil (5mm diameter): Promotes superior heat exchange for improved cooling and heating performance.
-
Factory-installed filter drier: Protects the HVAC system from moisture and contaminants, enhancing reliability.
-
Sweat connection service valves: Simplify maintenance with easy access to gauge ports for efficient diagnostics.
-
Enclosed contactor: Protects electrical components from dust and moisture, ensuring consistent operation.
-
High-pressure switch: Monitors system pressure and automatically shuts down the compressor if limits are exceeded.
-
Ground lug connection: Provides secure electrical grounding, enhancing safety and compliance.
-
Capacitors with extended life: Designed for longevity, reducing replacement frequency and ensuring consistent performance.
-
AHRI Certified: Confirms compliance with energy efficiency standards.
-
ETL Listed: Ensures safety compliance and reliability.
-
Removable grille-style top design (UL 60335-2-40 compliant): Allows easy access for maintenance without extensive disassembly.
-
Venturi design: Enhances airflow velocity for improved system efficiency.
-
Architectural Gray powder-paint finish: Provides durability and corrosion resistance, meeting 500-hour salt-spray approval.
-
Wire fan discharge grille: Improves airflow efficiency while reducing noise.
-
Steel louver coil guard: Protects the coil from damage while ensuring optimal airflow.
-
Top and side maintenance access: Streamlines servicing with multiple access points.
-
Single-panel access to controls: Facilitates easy diagnostics and upgrades.
-
Compliance with the 2023 Florida Building Code: Meets hurricane wind requirements when properly anchored (anchor bracket kits available).
Goodman Gas Furnace Upflow/Horizontal 80% AFUE 100,000 BTU Single Stage GM9S801005CN
The Goodman 5 Ton Gas Furnace GM9S801005CN is a powerful and versatile heating solution, delivering 100,000 BTU of warmth for your home. Designed for upflow or horizontal installation, this multi-speed furnace ensures consistent comfort throughout your space. Its single-stage operation optimizes efficiency, making it an ideal choice for energy-conscious homeowners. Built with durable materials and advanced engineering, this furnace promises reliability and longevity. Enjoy cozy winters with the trusted performance of Goodman, designed to keep your home warm and inviting.
- Unit Height: 33.375 in
- Unit Width: 21 in
- AFUE: 80 %
- Capacity Nominal: 60000 Btu/H
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Nine Speed ECM
- Unit Weight: 132 lb
- Unit Depth: 28 in
- High reliability and quality
- Durable and long-igniter life
- Provisions for electronic air cleaner and humidifier
-
Energy efficient and quiet circulation
-
Self-diagnostic control board with constant memory
- Simple installation and setup
-
Quiet and simple operation
Product Features For Goodman 80% AFUE 100,000 BTU Gas Furnace
-
Heavy-duty aluminized-steel dual-diameter tubular heat exchanger for enhanced durability and heat transfer.
-
Single-stage gas valve provides reliable performance and efficient operation.
-
Durable hot-surface igniter ensures consistent ignition and long-lasting service life.
-
Quiet, single-speed draft induced blower minimizes noise while maximizing airflow.
-
Self-diagnostic control board simplifies troubleshooting with constant memory capabilities.
-
Color-coded low-voltage terminals for easy wiring and installation.
-
Multi-speed ECM blower motor optimizes airflow and efficiency based on demand.
-
California Low NOx emissions models available to meet environmental regulations.
-
Installation restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
-
AHRI Certified and ETL Listed for verified performance and safety compliance.
-
Installation configurations: GM9S80 for upflow, horizontal left or right; GC9S80 for downflow, horizontal left or right.
-
Convenient left or right connections for gas and electrical service simplify setup.
-
Heavy-gauge steel cabinet with durable baked-enamel finish ensures longevity and protection.
-
Foil-faced insulated heat exchanger enhances energy efficiency and reduces heat loss.
Goodman 2.5 - 3.5 Ton R32 Evaporator Coil Upflow/Downflow Cased with Built-in TXV CAPTA4230C3
The Goodman CAPTA4230C3 Evaporator Coil is a high-performance unit designed for R32 refrigerant, perfect for upflow or downflow applications. With a compact size of 30" high and 21" wide, it features built-in thermal expansion valves (TXV) for enhanced efficiency in cooling and heat pump systems. This all-aluminum coil minimizes condensation with its foil-faced insulation and ensures durability with its galvanized finish. AHRI certified and ETL listed, this evaporator coil guarantees reliable performance and energy savings for your HVAC system.
- Refrigerant Type: R-32
- Unit Height: 30 in
- Unit Width: 21 in
- Cased/Uncased: Cased
- Tonnage: 3.5
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
Product Features of Goodman CAPTA4230C3 Evaporator Coil
-
High-Performance All-Aluminum Design: Specifically engineered for R-32 refrigerant to optimize efficiency in cooling and heat pump applications.
-
Integrated Thermal Expansion Valves: Factory-installed TXVs enhance performance and adaptability in various HVAC systems.
-
Flexible Installation Options: Compatible with both vertical and horizontal configurations, ensuring versatility for different setups.
-
Compact 21-Inch Depth: Facilitates easy access, making it ideal for installation in tight attic spaces.
-
Foil-Faced Insulation: Reduces cabinet condensation, improving overall energy efficiency and performance.
-
Durable Construction: Galvanized finish with a leather grain-embossed texture enhances longevity and resistance to wear.
-
Rust-Resistant Drain Pan: Low water retention and UV-resistant properties, equipped with secondary drain connections for effective drainage.
-
Maintenance Convenience: Easy-to-remove drain pan rails simplify cleaning and maintenance tasks.
-
Certified Reliability: AHRI certified and ETL listed, ensuring compliance with industry standards for safety and efficiency.
-
Optimized Circuits and Manifolds: Standardized copper suction tube stub length for improved installation and efficiency.
-
Single Front Access Panel: Simplifies access to internal components for easier servicing.
This evaporator coil combines efficiency, durability, and user-friendly features for a dependable HVAC solution.
Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044
The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.
Key Features:
-
Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
-
Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
-
Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
-
Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.
This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.
