Goodman 2.5 Ton R32 Split Heat Pump Multi-Family 14.3 SEER2 Single Stage GLZS4MA3010
Discover the Goodman 2.5 Ton R32 Split Heat Pump, model GLZS4MA3010, featuring a 14.3 SEER2 rating and a nominal heating capacity of 30,000 BTU/H. This single-stage unit, powered by a high-efficiency scroll compressor, offers reliable performance with SmartShift® technology for quiet defrosting. The enhanced aluminum fin coil and single-speed PSC condenser fan motor improve cooling efficiency. Factory-installed components include a bi-flow liquid-line filter drier and suction-line accumulator, while safety features like pressure switches and service valves ensure optimal operation. AHRI Certified and ETL Listed, this 174 lb unit is designed for durability and efficiency.
- Heating Capacity Nominal: 30000 Btu/H
- Refrigerant Type: R-32
- SEER 2: 14.5
- Unit Height: 32.5 in
- Unit Width: 29 in
- Max Overcurrent Protection: 25 A
- Power Phase: 1 Ph
- Power Voltage: 208/240 V
- Compressor Stages: Single Stage
- Compressor Type: Scroll
- Unit Weight: 174 lb
- Model Efficiency: 14.3 SEER2
- Unit Depth: 29 in
Standard Features
-
High-Efficiency Scroll Compressor: Provides optimal performance and energy savings.
-
SmartShift® Technology: Ensures quiet and reliable defrost operation.
-
Enhanced Aluminum Fin Coil:
-
5 mm Diameter: Available for 1.5 to 3.5-ton models.
-
7 mm Diameter Copper Tubes: Used in 4.0 to 5.0-ton models.
-
Single-Speed PSC Condenser Fan Motor: Delivers efficient airflow for better cooling.
-
Factory-Installed Components:
-
Bi-Flow Liquid-Line Filter Drier: Protects against moisture and contaminants.
-
Suction-Line Accumulator: Enhances system efficiency.
-
Compressor Crankcase Heater: Prevents compressor damage.
-
High-Capacity Muffler: Reduces operational noise.
-
Pressure Switches: High- and low-pressure switches for enhanced safety.
-
Service Valves: Features sweat connections and easy access to gauge ports.
-
Fully Charged for 15 Feet of Tubing: Simplifies installation.
-
Electrical Components:
-
Contactor with Lug Connection: Ensures reliable electrical performance.
-
Ground Lug Connection: Enhances safety.
-
Extended-Life Capacitors: Increases longevity and reliability.
-
Certifications: AHRI Certified and ETL Listed for quality assurance.
Cabinet Features
-
Removable Grille-Style Top Design: Complies with UL 60335-2-40 for easy maintenance.
-
Steel Louver Coil Guard: Protects the coil from damage and debris.
-
Heavy-Gauge Galvanized-Steel Cabinet: Ensures durability and corrosion resistance.
-
Architectural Gray Powder-Paint Finish:
-
500-Hour Salt-Spray Approved: Provides exceptional corrosion resistance.
-
Maintenance Access: Convenient top and side access for servicing.
-
Hurricane Integrity Compliance:
- Meets 2023 Florida Building Code requirements for hurricane winds when properly anchored (anchor bracket kits available).
Upgrade your home heating with the Goodman R32 gas furnace, offering an impressive 92% AFUE efficiency and a robust 60,000 BTU capacity. Designed for versatile installation in upflow or horizontal configurations, this unit features a durable aluminized-steel heat exchanger and a stainless-steel secondary heat exchanger for enhanced performance and longevity. With a multi-speed ECM blower motor, enjoy energy-efficient airflow and minimal noise. Its self-diagnostic control board simplifies maintenance, while compliance with California's low NOx standards ensures eco-friendliness. AHRI certified and ETL listed, this furnace guarantees reliability and safety, making it the perfect choice for efficient home comfort.
- Unit Height: 33-3/8 in
- Unit Width: 17-1/2 in
- AFUE: 92 %
- 60,000 BTU
- R32
- Installation Configuration: Upflow/Horizontal
- Max Overcurrent Protection: 15 A
- Power Phase: 1 Ph
- Power Voltage: 115 V
- Motor Speed Type: Multi Speed ECM
- Unit Weight: 114 lb
- Model Efficiency: 0.92
- Unit Depth: 28 in
- Heat Exchanger Type: Air Cooled
Standard Features of R32 Highly Efficient 92% AFUE Gas Furnace
-
Heavy-duty Aluminized-Steel Tubular Heat Exchanger: Ensures durability and efficient heat transfer.
-
Stainless-Steel Secondary Heat Exchanger: Provides enhanced performance and longevity.
-
Single-Stage Gas Valve: Simplifies operation with reliable gas control.
-
Durable Silicon Nitride Igniter: Offers consistent ignition performance.
-
Multi-Speed ECM Blower Motor: Delivers energy-efficient airflow and improved comfort.
-
Quiet Single-Speed Induced Draft Blower: Ensures minimal operational noise.
-
Self-Diagnostic Control Board: Facilitates easy troubleshooting and maintenance.
-
California Compliance: Meets the 40 ng/J Low NOx emissions standard.
-
Installation Restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
-
AHRI Certified & ETL Listed: Guarantees high efficiency and safety standards.
-
Multi-Position Installation: Designed for upflow, horizontal left, or right configurations.
-
Ventilation Options: Certified for direct vent (2-pipe) or non-direct vent (1-pipe) setups.
-
Flexible Venting: Easy-to-install top venting with optional side venting for GR9S92/upflow models.
-
Convenient Gas & Electrical Connections: Available on the left or right side for easier installation.
Cabinet Features
-
Low Air Leakage: Cabinet air leakage (QLeak) ≤ 2% for energy efficiency.
-
Heavy-Gauge Steel Cabinet: Built to withstand wear with a durable finish.
-
Insulated Heat Exchanger Cabinet: Foil-faced insulation improves energy efficiency.
-
Airtight Bottom or Side Return: Features easy-cut tabs for hassle-free removal in bottom air-inlet applications.
Goodman 3.5 Ton R32 Evaporator Coil Upflow/Downflow Cased with Built-in TXV CAPTA4230C3
The Goodman CAPTA4230C3 Evaporator Coil is a high-performance unit designed for R32 refrigerant, perfect for upflow or downflow applications. With a compact size of 30" high and 21" wide, it features built-in thermal expansion valves (TXV) for enhanced efficiency in cooling and heat pump systems. This all-aluminum coil minimizes condensation with its foil-faced insulation and ensures durability with its galvanized finish. AHRI certified and ETL listed, this evaporator coil guarantees reliable performance and energy savings for your HVAC system.
- Refrigerant Type: R-32
- Unit Height: 30 in
- Unit Width: 21 in
- Cased/Uncased: Cased
- Tonnage: 3.5
- Coil Application: Upflow/Downflow
- Unit Depth: 21 in
Product Features of Goodman CAPTA4230C3 Evaporator Coil
-
High-Performance All-Aluminum Design: Specifically engineered for R-32 refrigerant to optimize efficiency in cooling and heat pump applications.
-
Integrated Thermal Expansion Valves: Factory-installed TXVs enhance performance and adaptability in various HVAC systems.
-
Flexible Installation Options: Compatible with both vertical and horizontal configurations, ensuring versatility for different setups.
-
Compact 21-Inch Depth: Facilitates easy access, making it ideal for installation in tight attic spaces.
-
Foil-Faced Insulation: Reduces cabinet condensation, improving overall energy efficiency and performance.
-
Durable Construction: Galvanized finish with a leather grain-embossed texture enhances longevity and resistance to wear.
-
Rust-Resistant Drain Pan: Low water retention and UV-resistant properties, equipped with secondary drain connections for effective drainage.
-
Maintenance Convenience: Easy-to-remove drain pan rails simplify cleaning and maintenance tasks.
-
Certified Reliability: AHRI certified and ETL listed, ensuring compliance with industry standards for safety and efficiency.
-
Optimized Circuits and Manifolds: Standardized copper suction tube stub length for improved installation and efficiency.
-
Single Front Access Panel: Simplifies access to internal components for easier servicing.
This evaporator coil combines efficiency, durability, and user-friendly features for a dependable HVAC solution.
View More Heat Pump & Furnace Systems
