Goodman 4 Ton 14.3 SEER2 Central Air Conditioner Condenser Single Stage R32 GLXS4BA4810
The Goodman GLXS4BA4810 is a high-value, standard-efficiency air conditioner condenser built for long-term performance and homeowner comfort. Designed with durable components and compliant with modern refrigerant regulations, this 4-ton, 14.3 SEER2 condenser provides reliable cooling for medium to large homes in ideal climates. Featuring R-32 refrigerant, factory-installed filter drier, and sound-dampening construction, it's a dependable choice for efficient and quiet home cooling.
Key Features
-
4 Ton Cooling Capacity – Ideal for medium to large homes in average climates
-
14.3 SEER2 Efficiency – Meets DOE standards for standard-efficiency air conditioners
-
R-32 Refrigerant – Complies with Clean Air Act requirements and 2025 refrigerant mandates
-
Pre-Charged for 15 Feet – Factory-charged with refrigerant to support up to 15' of line set
-
Low Sound Output – Factory-enhanced sound-dampening features reduce operational noise
-
Factory-Installed Filter Drier – Improves system reliability and protects internal components
-
Galvanized Steel Cabinet – Baked-on powder coat resists corrosion; 500-hour salt-spray approved
-
Florida Building Code Compliant – Meets 2010 wind load integrity requirements when anchored
-
Sweat Connection Service Valves – With gauge ports for easier installation and servicing
-
Top and Side Maintenance Access – Allows faster service and component checks
-
10-Year Parts Warranty – Coverage with online registration and code-compliant installation
Disclaimer: This condenser uses R-32 refrigerant (classified as A2L) and must be paired with an R-32 compatible air handler or evaporator coil equipped with a refrigerant leak detection system. Failure to follow these safety requirements may void the warranty and pose potential hazards.
Goodman 80% 100K BTU Gas Furnace Single Stage Low NOx Upflow/Horizontal R32 GR9S801005CX
The Goodman GR9S801005CX 80% AFUE R32 Gas Furnace delivers powerful, efficient, and environmentally responsible heating performance. With a 100,000 BTU heating capacity and a multi-speed ECM blower motor, this furnace ensures consistent comfort, reduced energy consumption, and quieter operation. Engineered for reliability, it features a heavy-duty aluminized steel heat exchanger, durable hot-surface igniter, and self-diagnostic control board for simplified maintenance and service. Designed for upflow and horizontal installations, the GR9S801005CX provides flexibility, efficiency, and compliance with California’s Low NOx emission standards.
Key Specifications
-
Heating Capacity - 100,000 BTU input with efficient, even heat distribution for medium to large homes.
-
AFUE Efficiency - 80% Annual Fuel Utilization Efficiency for reliable, cost-effective heating.
-
Airflow - 2000 CFM multi-speed ECM blower motor for improved airflow and energy savings.
-
Heat Exchanger Type - Dual-diameter aluminized steel tubular design for durability and high thermal efficiency.
-
Power Requirements - 115V, single-phase, 15A maximum overcurrent protection.
-
Installation Options - Supports upflow and horizontal configurations; left or right gas and electrical service connections.
-
Dimensions - Height: 33-3/8", Width: 21", Depth: 28"; Weight: 132 lbs.
Key Features
-
Low NOx Burner - Meets California Low NOx emission requirements, reducing harmful nitrogen oxides for cleaner operation.
-
Single-Stage Gas Valve - Delivers dependable performance and consistent heating output.
-
Durable Hot-Surface Igniter - Ensures reliable ignition and long service life with minimal maintenance.
-
Quiet Draft Inducer - Single-speed draft inducer promotes smooth airflow and quieter performance.
-
Self-Diagnostic Control Board - Monitors system performance and simplifies troubleshooting.
-
Color-Coded Wiring - Low-voltage terminals streamline installation and reduce setup time.
-
Heavy-Gauge Steel Cabinet - Foil-faced insulation and baked-enamel finish improve durability and energy retention.
-
Flexible Installation - GR9S80 models support upflow/horizontal left or right; GD9S80 models support downflow/horizontal left or right.
-
Certifications - AHRI Certified and ETL Listed for safety, performance, and efficiency compliance.
California Compliance Notice
This Goodman GR9S801005CX Low NOx Furnace is compliant with California’s standard Low NOx regulations and is designed to reduce nitrogen oxide emissions. However, it cannot be installed in the following counties that require Ultra-Low NOx furnaces.
Dependable Comfort and Efficiency
The Goodman 80% AFUE R32 Gas Furnace provides reliable comfort, efficiency, and quiet performance with environmentally conscious Low NOx technology. Its combination of durable construction, intelligent diagnostics, and flexible installation options makes it an excellent choice for homeowners seeking dependable warmth and long-term energy savings.
Goodman 4 Ton Evaporator Coil Cased With TXV 21" Height Horizontal CHPTA4830C3
The Goodman CHPTA4830C3 is a high-performance horizontal evaporator coil designed for reliable operation and installation flexibility. Compatible with R32 air conditioners and heat pumps, this 4-ton A-coil comes with a factory-installed TXV to ensure precise refrigerant metering, optimized airflow, and improved system efficiency. Its durable aluminum coil, heavy-duty cabinet, and mold-resistant drain pan make it an excellent choice for both new installations and system replacements.
Key Features
-
Capacity - 4-ton horizontal evaporator coil, ideal for residential AC and heat pump systems
-
Refrigerant Compatibility - Works with R32 refrigerant, compliant with EPA Clean Air Act regulations
-
Factory-Installed TXV - Provides precise refrigerant flow control for enhanced efficiency
-
Aluminum Coil Construction - Resists corrosion and extends the lifespan of the coil
-
Cabinet - Embossed galvanized steel with foil insulation for durability and reduced air leakage
-
Drain Pan - Thermoplastic, mold-resistant, and UV-protected for long-lasting performance
-
Maintenance Access - Split-seam front panel simplifies servicing and cleaning
-
Certifications - AHRI Certified and ETL Listed for verified performance and safety
-
Compatibility - Designed to work with Goodman furnaces or blower systems (sold separately)
Safety and Performance Certifications
AHRI certification ensures verified performance, while ETL listing confirms compliance with rigorous safety standards. Homeowners and contractors can rely on this evaporator coil for safe, efficient operation.
With its combination of durable construction, precision refrigerant control, and installation flexibility, the Goodman CHPTA4830C3 is a dependable choice for maximizing comfort and efficiency in residential AC and heat pump systems.
View More Air Conditioner & Furnace Systems
